Canon Digital IXUS II vs. Canon Digital IXUS i
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon Digital IXUS II | Canon Digital IXUS i | ||||
check price » | check price » |
Megapixels
3.10
4.00
Max. image resolution
2048 x 1536
2272 x 1704
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.7" (~ 5.33 x 4 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.17 |
(ratio) | ||
Canon Digital IXUS II | Canon Digital IXUS i |
Surface area:
21.32 mm² | vs | 24.84 mm² |
Difference: 3.52 mm² (17%)
IXUS i sensor is approx. 1.17x bigger than IXUS II sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.66 µm² (11%)
A pixel on Canon IXUS II sensor is approx. 11% bigger than a pixel on Canon IXUS i.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon IXUS II
Canon IXUS i
Total megapixels
3.30
4.20
Effective megapixels
3.10
4.00
Optical zoom
2x
1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 50, 100, 200, 400
RAW
Manual focus
Normal focus range
47 cm
10 cm
Macro focus range
10 cm
3 cm
Focal length (35mm equiv.)
35 - 70 mm
39 mm
Aperture priority
No
No
Max. aperture
f2.8 - f3.9
f2.8
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
15 sec
15 sec
Max. shutter speed
1/1500 sec
1/1500 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
None
White balance presets
6
5
Screen size
1.5"
1.5"
Screen resolution
118,000 dots
78,000 dots
Video capture
Max. video resolution
Storage types
SD/MMC card
SD/MMC card
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
Canon Lithium-Ion
Lithium-Ion NB-3L battery
Weight
185 g
140 g
Dimensions
85 x 56 x 24 mm
90 x 47 x 19 mm
Year
2003
2003
Choose cameras to compare
Popular comparisons:
- Canon Digital IXUS II vs. Canon Digital IXUS v2
- Canon Digital IXUS II vs. Sony Cyber-shot DSC-HX50
- Canon Digital IXUS II vs. Nikon Coolpix L25
- Canon Digital IXUS II vs. Fujifilm Digital Q1
- Canon Digital IXUS II vs. Canon IXUS 500 HS
- Canon Digital IXUS II vs. Nikon D3200
- Canon Digital IXUS II vs. Canon Digital IXUS 330
- Canon Digital IXUS II vs. Canon Digital IXUS 40
- Canon Digital IXUS II vs. Canon IXUS 285 HS
- Canon Digital IXUS II vs. Canon Digital IXUS i
- Canon Digital IXUS II vs. Sony Cyber-shot DSC-T300
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon IXUS II diagonal
The diagonal of IXUS II sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Canon IXUS i diagonal
The diagonal of IXUS i sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
IXUS II sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
IXUS i sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
IXUS II pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 2031 pixels
Sensor resolution width = 2031 pixels
Pixel pitch = | 5.33 | × 1000 | = 2.62 µm |
2031 |
IXUS i pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2306 pixels
Sensor resolution width = 2306 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.49 µm |
2306 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
IXUS II pixel area
Pixel pitch = 2.62 µm
Pixel area = 2.62² = 6.86 µm²
Pixel area = 2.62² = 6.86 µm²
IXUS i pixel area
Pixel pitch = 2.49 µm
Pixel area = 2.49² = 6.2 µm²
Pixel area = 2.49² = 6.2 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
IXUS II pixel density
Sensor resolution width = 2031 pixels
Sensor width = 0.533 cm
Pixel density = (2031 / 0.533)² / 1000000 = 14.52 MP/cm²
Sensor width = 0.533 cm
Pixel density = (2031 / 0.533)² / 1000000 = 14.52 MP/cm²
IXUS i pixel density
Sensor resolution width = 2306 pixels
Sensor width = 0.575 cm
Pixel density = (2306 / 0.575)² / 1000000 = 16.08 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2306 / 0.575)² / 1000000 = 16.08 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
IXUS II sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 3.10
Resolution horizontal: X × r = 1527 × 1.33 = 2031
Resolution vertical: X = 1527
Sensor resolution = 2031 x 1527
Sensor height = 4.00 mm
Effective megapixels = 3.10
r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 1527
Sensor resolution = 2031 x 1527
IXUS i sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 4.00
Resolution horizontal: X × r = 1734 × 1.33 = 2306
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
Sensor height = 4.32 mm
Effective megapixels = 4.00
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
IXUS II crop factor
Sensor diagonal in mm = 6.66 mm
Crop factor = | 43.27 | = 6.5 |
6.66 |
IXUS i crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
IXUS II equivalent aperture
Crop factor = 6.5
Aperture = f2.8 - f3.9
35-mm equivalent aperture = (f2.8 - f3.9) × 6.5 = f18.2 - f25.4
Aperture = f2.8 - f3.9
35-mm equivalent aperture = (f2.8 - f3.9) × 6.5 = f18.2 - f25.4
IXUS i equivalent aperture
Crop factor = 6.02
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 6.02 = f16.9
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 6.02 = f16.9
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.