Canon EOS 300D vs. Fujifilm FinePix S2980
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon EOS 300D | Fujifilm FinePix S2980 | ||||
check price » | check price » |
Megapixels
6.30
14.00
Max. image resolution
3072 x 2048
4288 x 3216
Sensor
Sensor type
CMOS
n/a
Sensor size
22.7 x 15.1 mm
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
12.04 | : | 1 |
(ratio) | ||
Canon EOS 300D | Fujifilm FinePix S2980 |
Surface area:
342.77 mm² | vs | 28.46 mm² |
Difference: 314.31 mm² (1104%)
300D sensor is approx. 12.04x bigger than S2980 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 8 years between Canon 300D (2003) and Fujifilm S2980 (2011).
Eight years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 52.42 µm² (2570%)
A pixel on Canon 300D sensor is approx. 2570% bigger than a pixel on Fujifilm S2980.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon 300D
Fujifilm S2980
Total megapixels
6.34
Effective megapixels
6.30
Optical zoom
Digital zoom
No
ISO sensitivity
Auto, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Max. aperture
Metering
Centre weighted, Matrix, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Min. shutter speed
30 sec
Max. shutter speed
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical (pentamirror)
Electronic
White balance presets
6
Screen size
1.8"
Screen resolution
118,000 dots
Video capture
Max. video resolution
Storage types
CompactFlash type I, CompactFlash type II, Microdrive
USB
USB 1.0
HDMI
Wireless
GPS
Battery
Canon 1100mAh Li-Ion
Weight
645 g
Dimensions
142 x 99 x 73 mm
Year
2003
2011
Choose cameras to compare
Popular comparisons:
- Canon EOS 300D vs. Canon EOS 1300D
- Canon EOS 300D vs. Canon EOS 1000D
- Canon EOS 300D vs. Canon EOS Rebel T3i
- Canon EOS 300D vs. Canon EOS 350D
- Canon EOS 300D vs. Canon EOS 500D
- Canon EOS 300D vs. Canon EOS Rebel T3
- Canon EOS 300D vs. Canon EOS 400D
- Canon EOS 300D vs. Canon EOS 450D
- Canon EOS 300D vs. Fujifilm FinePix S2980
- Canon EOS 300D vs. Nikon D3100
- Canon EOS 300D vs. Nikon D100
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon 300D diagonal
w = 22.70 mm
h = 15.10 mm
h = 15.10 mm
Diagonal = √ | 22.70² + 15.10² | = 27.26 mm |
Fujifilm S2980 diagonal
The diagonal of S2980 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
300D sensor area
Width = 22.70 mm
Height = 15.10 mm
Surface area = 22.70 × 15.10 = 342.77 mm²
Height = 15.10 mm
Surface area = 22.70 × 15.10 = 342.77 mm²
S2980 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
300D pixel pitch
Sensor width = 22.70 mm
Sensor resolution width = 3074 pixels
Sensor resolution width = 3074 pixels
Pixel pitch = | 22.70 | × 1000 | = 7.38 µm |
3074 |
S2980 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4315 pixels
Sensor resolution width = 4315 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.43 µm |
4315 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
300D pixel area
Pixel pitch = 7.38 µm
Pixel area = 7.38² = 54.46 µm²
Pixel area = 7.38² = 54.46 µm²
S2980 pixel area
Pixel pitch = 1.43 µm
Pixel area = 1.43² = 2.04 µm²
Pixel area = 1.43² = 2.04 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
300D pixel density
Sensor resolution width = 3074 pixels
Sensor width = 2.27 cm
Pixel density = (3074 / 2.27)² / 1000000 = 1.83 MP/cm²
Sensor width = 2.27 cm
Pixel density = (3074 / 2.27)² / 1000000 = 1.83 MP/cm²
S2980 pixel density
Sensor resolution width = 4315 pixels
Sensor width = 0.616 cm
Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
300D sensor resolution
Sensor width = 22.70 mm
Sensor height = 15.10 mm
Effective megapixels = 6.30
Resolution horizontal: X × r = 2049 × 1.5 = 3074
Resolution vertical: X = 2049
Sensor resolution = 3074 x 2049
Sensor height = 15.10 mm
Effective megapixels = 6.30
r = 22.70/15.10 = 1.5 |
|
Resolution vertical: X = 2049
Sensor resolution = 3074 x 2049
S2980 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 14.00
Resolution horizontal: X × r = 3244 × 1.33 = 4315
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
Sensor height = 4.62 mm
Effective megapixels = 14.00
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
300D crop factor
Sensor diagonal in mm = 27.26 mm
Crop factor = | 43.27 | = 1.59 |
27.26 |
S2980 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
300D equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon 300D, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon 300D is 1.59
Crop factor for Canon 300D is 1.59
S2980 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Fujifilm S2980, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Fujifilm S2980 is 5.62
Crop factor for Fujifilm S2980 is 5.62
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.