Canon EOS Digital Rebel XTi vs. Canon EOS Rebel T6
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon EOS Digital Rebel XTi | Canon EOS Rebel T6 | ||||
check price » | check price » |
Megapixels
10.10
18.00
Max. image resolution
3888 x 2592
5184 x 3456
Sensor
Sensor type
CMOS
CMOS
Sensor size
22.2 x 14.8 mm
22.3 x 14.9 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.01 |
(ratio) | ||
Canon EOS Digital Rebel XTi | Canon EOS Rebel T6 |
Surface area:
328.56 mm² | vs | 332.27 mm² |
Difference: 3.71 mm² (1%)
Rebel T6 sensor is slightly bigger than Digital Rebel XTi sensor (only 1% difference).
Note: You are comparing sensors of very different generations.
There is a gap of 10 years between Canon Digital Rebel XTi (2006) and Canon Rebel T6 (2016).
Ten years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 14.09 µm² (77%)
A pixel on Canon Digital Rebel XTi sensor is approx. 77% bigger than a pixel on Canon Rebel T6.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon Digital Rebel XTi
Canon Rebel T6
Total megapixels
10.50
18.70
Effective megapixels
10.10
18.00
Optical zoom
Digital zoom
No
No
ISO sensitivity
Auto, 100, 200, 400, 800, 1600
Auto, 100-6400 (expandable to 12800)
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Centre weighted, Matrix, Spot
Multi, Center-weighted, Partial
Exposure compensation
±2 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
Bulb+30 sec
30 sec
Max. shutter speed
1/4000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical (pentamirror)
Optical (pentamirror)
White balance presets
6
6
Screen size
2.5"
3"
Screen resolution
230,000 dots
921,600 dots
Video capture
Max. video resolution
1920x1080 (30p/25p/24p)
Storage types
CompactFlash type I, CompactFlash type II, Microdrive
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
AA (2) batteries (NiMH recommended)
Lithium-Ion LP-E10 rechargeable battery
Weight
556 g
485 g
Dimensions
126 x 94 x 65 mm
129 x 101.3 x 77.6 mm
Year
2006
2016
Choose cameras to compare
Popular comparisons:
- Canon EOS Digital Rebel XTi vs. Canon EOS Rebel T6
- Canon EOS Digital Rebel XTi vs. Canon EOS Rebel T3i
- Canon EOS Digital Rebel XTi vs. Canon EOS Digital Rebel XS
- Canon EOS Digital Rebel XTi vs. Canon EOS Rebel T7i
- Canon EOS Digital Rebel XTi vs. Canon EOS Rebel T1i
- Canon EOS Digital Rebel XTi vs. Nikon D3100
- Canon EOS Digital Rebel XTi vs. Canon EOS Rebel T5
- Canon EOS Digital Rebel XTi vs. Canon EOS Digital Rebel XSi
- Canon EOS Digital Rebel XTi vs. Canon EOS Rebel T6i
- Canon EOS Digital Rebel XTi vs. Nikon D3300
- Canon EOS Digital Rebel XTi vs. Canon EOS 1000D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon Digital Rebel XTi diagonal
w = 22.20 mm
h = 14.80 mm
h = 14.80 mm
Diagonal = √ | 22.20² + 14.80² | = 26.68 mm |
Canon Rebel T6 diagonal
w = 22.30 mm
h = 14.90 mm
h = 14.90 mm
Diagonal = √ | 22.30² + 14.90² | = 26.82 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Digital Rebel XTi sensor area
Width = 22.20 mm
Height = 14.80 mm
Surface area = 22.20 × 14.80 = 328.56 mm²
Height = 14.80 mm
Surface area = 22.20 × 14.80 = 328.56 mm²
Rebel T6 sensor area
Width = 22.30 mm
Height = 14.90 mm
Surface area = 22.30 × 14.90 = 332.27 mm²
Height = 14.90 mm
Surface area = 22.30 × 14.90 = 332.27 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
Digital Rebel XTi pixel pitch
Sensor width = 22.20 mm
Sensor resolution width = 3893 pixels
Sensor resolution width = 3893 pixels
Pixel pitch = | 22.20 | × 1000 | = 5.7 µm |
3893 |
Rebel T6 pixel pitch
Sensor width = 22.30 mm
Sensor resolution width = 5196 pixels
Sensor resolution width = 5196 pixels
Pixel pitch = | 22.30 | × 1000 | = 4.29 µm |
5196 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
Digital Rebel XTi pixel area
Pixel pitch = 5.7 µm
Pixel area = 5.7² = 32.49 µm²
Pixel area = 5.7² = 32.49 µm²
Rebel T6 pixel area
Pixel pitch = 4.29 µm
Pixel area = 4.29² = 18.4 µm²
Pixel area = 4.29² = 18.4 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
Digital Rebel XTi pixel density
Sensor resolution width = 3893 pixels
Sensor width = 2.22 cm
Pixel density = (3893 / 2.22)² / 1000000 = 3.08 MP/cm²
Sensor width = 2.22 cm
Pixel density = (3893 / 2.22)² / 1000000 = 3.08 MP/cm²
Rebel T6 pixel density
Sensor resolution width = 5196 pixels
Sensor width = 2.23 cm
Pixel density = (5196 / 2.23)² / 1000000 = 5.43 MP/cm²
Sensor width = 2.23 cm
Pixel density = (5196 / 2.23)² / 1000000 = 5.43 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Digital Rebel XTi sensor resolution
Sensor width = 22.20 mm
Sensor height = 14.80 mm
Effective megapixels = 10.10
Resolution horizontal: X × r = 2595 × 1.5 = 3893
Resolution vertical: X = 2595
Sensor resolution = 3893 x 2595
Sensor height = 14.80 mm
Effective megapixels = 10.10
r = 22.20/14.80 = 1.5 |
|
Resolution vertical: X = 2595
Sensor resolution = 3893 x 2595
Rebel T6 sensor resolution
Sensor width = 22.30 mm
Sensor height = 14.90 mm
Effective megapixels = 18.00
Resolution horizontal: X × r = 3464 × 1.5 = 5196
Resolution vertical: X = 3464
Sensor resolution = 5196 x 3464
Sensor height = 14.90 mm
Effective megapixels = 18.00
r = 22.30/14.90 = 1.5 |
|
Resolution vertical: X = 3464
Sensor resolution = 5196 x 3464
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
Digital Rebel XTi crop factor
Sensor diagonal in mm = 26.68 mm
Crop factor = | 43.27 | = 1.62 |
26.68 |
Rebel T6 crop factor
Sensor diagonal in mm = 26.82 mm
Crop factor = | 43.27 | = 1.61 |
26.82 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Digital Rebel XTi equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon Digital Rebel XTi, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon Digital Rebel XTi is 1.62
Crop factor for Canon Digital Rebel XTi is 1.62
Rebel T6 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon Rebel T6, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon Rebel T6 is 1.61
Crop factor for Canon Rebel T6 is 1.61
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.