Canon EOS R vs. Canon EOS 2000D
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon EOS R | Canon EOS 2000D | ||||
check price » | check price » |
Megapixels
30.30
24.10
Max. image resolution
6720 x 4480
6000 x 4000
Sensor
Sensor type
CMOS
CMOS
Sensor size
36 x 24 mm
22.3 x 14.9 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
2.6 | : | 1 |
(ratio) | ||
Canon EOS R | Canon EOS 2000D |
Surface area:
864.00 mm² | vs | 332.27 mm² |
Difference: 531.73 mm² (160%)
R sensor is approx. 2.6x bigger than 2000D sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 14.76 µm² (107%)
A pixel on Canon R sensor is approx. 107% bigger than a pixel on Canon 2000D.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon R
Canon 2000D
Total megapixels
31.70
24.70
Effective megapixels
30.30
24.10
Optical zoom
Digital zoom
No
ISO sensitivity
Auto, 100-40000 (extends to 50-102400)
Auto, 100-6400 (extends to 12800)
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Multi, Center-weighted, Spot, Partial
Multi, Center-weighted, Partial
Exposure compensation
±3 EV (in 1/3 EV, 1/2 EV steps)
±5 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
30 sec
Max. shutter speed
1/8000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Electronic
Optical (pentamirror)
White balance presets
6
6
Screen size
3.2"
3"
Screen resolution
2,100,000 dots
921,600 dots
Video capture
Max. video resolution
3840x2160 (30p/25p/24p)
1920x1080 (30p/25p/24p)
Storage types
SD/SDHC/SDXC
SD/SDHC/SDXC
USB
USB 3.0 (5 GBit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
LP-E6N lithium-ion battery
Lithium-Ion LP-E10 rechargeable battery
Weight
660 g
475 g
Dimensions
135.8 x 98.3 x 84.4 mm
129 x 101.3 x 77.6 mm
Year
2018
2018
Choose cameras to compare
Popular comparisons:
- Canon EOS R vs. Canon EOS 5D Mark IV
- Canon EOS R vs. Canon EOS 6D Mark II
- Canon EOS R vs. Canon EOS RP
- Canon EOS R vs. Canon EOS 7D Mark II
- Canon EOS R vs. Canon EOS 80D
- Canon EOS R vs. Sony Alpha A7 III
- Canon EOS R vs. Canon EOS 200D
- Canon EOS R vs. Canon EOS 6D
- Canon EOS R vs. Canon EOS 5D Mark III
- Canon EOS R vs. Canon EOS 2000D
- Canon EOS R vs. Canon EOS 800D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon R diagonal
w = 36.00 mm
h = 24.00 mm
h = 24.00 mm
Diagonal = √ | 36.00² + 24.00² | = 43.27 mm |
Canon 2000D diagonal
w = 22.30 mm
h = 14.90 mm
h = 14.90 mm
Diagonal = √ | 22.30² + 14.90² | = 26.82 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
R sensor area
Width = 36.00 mm
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
2000D sensor area
Width = 22.30 mm
Height = 14.90 mm
Surface area = 22.30 × 14.90 = 332.27 mm²
Height = 14.90 mm
Surface area = 22.30 × 14.90 = 332.27 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
R pixel pitch
Sensor width = 36.00 mm
Sensor resolution width = 6741 pixels
Sensor resolution width = 6741 pixels
Pixel pitch = | 36.00 | × 1000 | = 5.34 µm |
6741 |
2000D pixel pitch
Sensor width = 22.30 mm
Sensor resolution width = 6012 pixels
Sensor resolution width = 6012 pixels
Pixel pitch = | 22.30 | × 1000 | = 3.71 µm |
6012 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
R pixel area
Pixel pitch = 5.34 µm
Pixel area = 5.34² = 28.52 µm²
Pixel area = 5.34² = 28.52 µm²
2000D pixel area
Pixel pitch = 3.71 µm
Pixel area = 3.71² = 13.76 µm²
Pixel area = 3.71² = 13.76 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
R pixel density
Sensor resolution width = 6741 pixels
Sensor width = 3.6 cm
Pixel density = (6741 / 3.6)² / 1000000 = 3.51 MP/cm²
Sensor width = 3.6 cm
Pixel density = (6741 / 3.6)² / 1000000 = 3.51 MP/cm²
2000D pixel density
Sensor resolution width = 6012 pixels
Sensor width = 2.23 cm
Pixel density = (6012 / 2.23)² / 1000000 = 7.27 MP/cm²
Sensor width = 2.23 cm
Pixel density = (6012 / 2.23)² / 1000000 = 7.27 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
R sensor resolution
Sensor width = 36.00 mm
Sensor height = 24.00 mm
Effective megapixels = 30.30
Resolution horizontal: X × r = 4494 × 1.5 = 6741
Resolution vertical: X = 4494
Sensor resolution = 6741 x 4494
Sensor height = 24.00 mm
Effective megapixels = 30.30
r = 36.00/24.00 = 1.5 |
|
Resolution vertical: X = 4494
Sensor resolution = 6741 x 4494
2000D sensor resolution
Sensor width = 22.30 mm
Sensor height = 14.90 mm
Effective megapixels = 24.10
Resolution horizontal: X × r = 4008 × 1.5 = 6012
Resolution vertical: X = 4008
Sensor resolution = 6012 x 4008
Sensor height = 14.90 mm
Effective megapixels = 24.10
r = 22.30/14.90 = 1.5 |
|
Resolution vertical: X = 4008
Sensor resolution = 6012 x 4008
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
R crop factor
Sensor diagonal in mm = 43.27 mm
Crop factor = | 43.27 | = 1 |
43.27 |
2000D crop factor
Sensor diagonal in mm = 26.82 mm
Crop factor = | 43.27 | = 1.61 |
26.82 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
R equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon R, take the aperture of the lens
you're using and multiply it with crop factor.
Since crop factor for Canon R is 1, the equivalent aperture is aperture.
Since crop factor for Canon R is 1, the equivalent aperture is aperture.
2000D equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon 2000D, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon 2000D is 1.61
Crop factor for Canon 2000D is 1.61
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.