Canon EOS R1 vs. Sony Alpha A7 III
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon EOS R1 | Sony Alpha A7 III | ||||
check price » | check price » |
Megapixels
24.20
24.20
Max. image resolution
6000 x 4000
6000 x 4000
Sensor
Sensor type
CMOS
CMOS
Sensor size
36 x 24 mm
35.6 x 23.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.02 | : | 1 |
(ratio) | ||
Canon EOS R1 | Sony Alpha A7 III |
Surface area:
864.00 mm² | vs | 847.28 mm² |
Difference: 16.72 mm² (2%)
R1 sensor is slightly bigger than Alpha A7 III sensor (only 2% difference).
Note: You are comparing sensors of very different generations.
There is a gap of 6 years between Canon R1 (2024) and Sony Alpha A7 III (2018).
Six years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.71 µm² (2%)
A pixel on Canon R1 sensor is approx. 2% bigger than a pixel on Sony Alpha A7 III.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon R1
Sony Alpha A7 III
Total megapixels
26.70
25.30
Effective megapixels
24.20
24.20
Optical zoom
Digital zoom
Yes
ISO sensitivity
Auto, 100-102400 (extends to 50-409600)
100-25600 (expandable to 50 - 204800)
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Multi, Center-weighted, Spot, Partial
Multi, Center-weighted, Highlight-weighted, Spot
Exposure compensation
±3 EV (in 1/3 EV, 1/2 EV steps)
±5 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
30 sec
Max. shutter speed
1/8000 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
Electronic
Electronic
White balance presets
6
10
Screen size
3.2"
3"
Screen resolution
2,100,000 dots
921,600 dots
Video capture
Max. video resolution
6000x3164 (60/50/30p/25p/24p)
3840x2160 (30p/25p/24p)
Storage types
CFexpress Type B (CFexpress 2.0)
SD/SDHC/SDXC, MS Duo/Pro Duo/Pro-HG Duo
USB
USB 3.2 (10 GBit/sec)
USB 3.0 (5 GBit/sec)
HDMI
Wireless
GPS
Battery
LP-E19 Lithium-Ion battery
NP-FZ100 lithium-ion battery
Weight
1115 g
650 g
Dimensions
157.6 x 149.5 x 87.3 mm
126.9 x 95.6 x 73.7 mm
Year
2024
2018
Choose cameras to compare
Popular comparisons:
- Canon EOS R1 vs. Canon EOS R5 Mark II
- Canon EOS R1 vs. Canon EOS Rebel T7
- Canon EOS R1 vs. Sony Alpha A7 III
- Canon EOS R1 vs. Canon EOS Rebel T6i
- Canon EOS R1 vs. Panasonic Lumix DC-S5
- Canon EOS R1 vs. Canon EOS R3
- Canon EOS R1 vs. Canon EOS 5D Mark IV
- Canon EOS R1 vs. Canon EOS R50
- Canon EOS R1 vs. Canon EOS M50
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon R1 diagonal
w = 36.00 mm
h = 24.00 mm
h = 24.00 mm
Diagonal = √ | 36.00² + 24.00² | = 43.27 mm |
Sony Alpha A7 III diagonal
w = 35.60 mm
h = 23.80 mm
h = 23.80 mm
Diagonal = √ | 35.60² + 23.80² | = 42.82 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
R1 sensor area
Width = 36.00 mm
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
Alpha A7 III sensor area
Width = 35.60 mm
Height = 23.80 mm
Surface area = 35.60 × 23.80 = 847.28 mm²
Height = 23.80 mm
Surface area = 35.60 × 23.80 = 847.28 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
R1 pixel pitch
Sensor width = 36.00 mm
Sensor resolution width = 6026 pixels
Sensor resolution width = 6026 pixels
Pixel pitch = | 36.00 | × 1000 | = 5.97 µm |
6026 |
Alpha A7 III pixel pitch
Sensor width = 35.60 mm
Sensor resolution width = 6026 pixels
Sensor resolution width = 6026 pixels
Pixel pitch = | 35.60 | × 1000 | = 5.91 µm |
6026 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
R1 pixel area
Pixel pitch = 5.97 µm
Pixel area = 5.97² = 35.64 µm²
Pixel area = 5.97² = 35.64 µm²
Alpha A7 III pixel area
Pixel pitch = 5.91 µm
Pixel area = 5.91² = 34.93 µm²
Pixel area = 5.91² = 34.93 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
R1 pixel density
Sensor resolution width = 6026 pixels
Sensor width = 3.6 cm
Pixel density = (6026 / 3.6)² / 1000000 = 2.8 MP/cm²
Sensor width = 3.6 cm
Pixel density = (6026 / 3.6)² / 1000000 = 2.8 MP/cm²
Alpha A7 III pixel density
Sensor resolution width = 6026 pixels
Sensor width = 3.56 cm
Pixel density = (6026 / 3.56)² / 1000000 = 2.87 MP/cm²
Sensor width = 3.56 cm
Pixel density = (6026 / 3.56)² / 1000000 = 2.87 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
R1 sensor resolution
Sensor width = 36.00 mm
Sensor height = 24.00 mm
Effective megapixels = 24.20
Resolution horizontal: X × r = 4017 × 1.5 = 6026
Resolution vertical: X = 4017
Sensor resolution = 6026 x 4017
Sensor height = 24.00 mm
Effective megapixels = 24.20
r = 36.00/24.00 = 1.5 |
|
Resolution vertical: X = 4017
Sensor resolution = 6026 x 4017
Alpha A7 III sensor resolution
Sensor width = 35.60 mm
Sensor height = 23.80 mm
Effective megapixels = 24.20
Resolution horizontal: X × r = 4017 × 1.5 = 6026
Resolution vertical: X = 4017
Sensor resolution = 6026 x 4017
Sensor height = 23.80 mm
Effective megapixels = 24.20
r = 35.60/23.80 = 1.5 |
|
Resolution vertical: X = 4017
Sensor resolution = 6026 x 4017
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
R1 crop factor
Sensor diagonal in mm = 43.27 mm
Crop factor = | 43.27 | = 1 |
43.27 |
Alpha A7 III crop factor
Sensor diagonal in mm = 42.82 mm
Crop factor = | 43.27 | = 1.01 |
42.82 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
R1 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon R1, take the aperture of the lens
you're using and multiply it with crop factor.
Since crop factor for Canon R1 is 1, the equivalent aperture is aperture.
Since crop factor for Canon R1 is 1, the equivalent aperture is aperture.
Alpha A7 III equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Sony Alpha A7 III, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Sony Alpha A7 III is 1.01
Crop factor for Sony Alpha A7 III is 1.01
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.