Canon EOS Rebel T3i vs. Fujifilm FinePix HS50 EXR
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Canon EOS Rebel T3i | Fujifilm FinePix HS50 EXR | ||||
| check price » | check price » | ||||
Megapixels
18.00
16.00
Max. image resolution
5184 x 3456
4608 x 3456
Sensor
Sensor type
CMOS
CMOS
Sensor size
22.3 x 14.9 mm
1/2" (~ 6.4 x 4.8 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 10.82 | : | 1 |
| (ratio) | ||
| Canon EOS Rebel T3i | Fujifilm FinePix HS50 EXR | |
Surface area:
| 332.27 mm² | vs | 30.72 mm² |
Difference: 301.55 mm² (982%)
Rebel T3i sensor is approx. 10.82x bigger than HS50 EXR sensor.
Note: You are comparing cameras of different generations.
There is a 2 year gap between Canon Rebel T3i (2011) and Fujifilm HS50 EXR (2013).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 16.47 µm² (853%)
A pixel on Canon Rebel T3i sensor is approx. 853% bigger than a pixel on Fujifilm HS50 EXR.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon Rebel T3i
Fujifilm HS50 EXR
Total megapixels
18.70
Effective megapixels
18.00
16.00
Optical zoom
42x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600, 3200, 6400, (12800 with boost)
Auto, 100, 200, 400, 800, 1600, 3200, 6400, 12800
RAW
Manual focus
Normal focus range
45 cm
Macro focus range
1 cm
Focal length (35mm equiv.)
24 - 1000 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f5.6
Metering
Multi, Center-weighted, Spot, Partial
Multi, Average, Spot
Exposure compensation
±5 EV (in 1/3 EV, 1/2 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
30 sec
Max. shutter speed
1/4000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical
Electronic
White balance presets
6
7
Screen size
3"
3"
Screen resolution
1,040,000 dots
920,000 dots
Video capture
Max. video resolution
1920x1080 (30p/25p/24p)
1920x1080 (60p/30p)
Storage types
SDHC, SDXC, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
Li-ion battery NP-W126
Weight
570 g
808 g
Dimensions
133.1 x 99.5 x 79.7 mm
134.9 x 101.3 x 145.9 mm
Year
2011
2013
Choose cameras to compare
Popular comparisons:
- Canon EOS Rebel T3i vs. Nikon D3200
- Canon EOS Rebel T3i vs. Canon EOS 6D
- Canon EOS Rebel T3i vs. Canon EOS Rebel T3
- Canon EOS Rebel T3i vs. Fujifilm FinePix HS50 EXR
- Canon EOS Rebel T3i vs. Nikon D5100
- Canon EOS Rebel T3i vs. Canon EOS 60D
- Canon EOS Rebel T3i vs. Canon EOS 5D Mark II
- Canon EOS Rebel T3i vs. Canon EOS Rebel T5i
- Canon EOS Rebel T3i vs. Canon PowerShot SX40 HS
- Canon EOS Rebel T3i vs. Canon EOS Rebel T4i
- Canon EOS Rebel T3i vs. Sony Cyber-shot DSC-RX100
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Canon Rebel T3i diagonal
w = 22.30 mm
h = 14.90 mm
h = 14.90 mm
| Diagonal = √ | 22.30² + 14.90² | = 26.82 mm |
Fujifilm HS50 EXR diagonal
The diagonal of HS50 EXR sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Rebel T3i sensor area
Width = 22.30 mm
Height = 14.90 mm
Surface area = 22.30 × 14.90 = 332.27 mm²
Height = 14.90 mm
Surface area = 22.30 × 14.90 = 332.27 mm²
HS50 EXR sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
Rebel T3i pixel pitch
Sensor width = 22.30 mm
Sensor resolution width = 5196 pixels
Sensor resolution width = 5196 pixels
| Pixel pitch = | 22.30 | × 1000 | = 4.29 µm |
| 5196 |
HS50 EXR pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 4612 pixels
Sensor resolution width = 4612 pixels
| Pixel pitch = | 6.40 | × 1000 | = 1.39 µm |
| 4612 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
Rebel T3i pixel area
Pixel pitch = 4.29 µm
Pixel area = 4.29² = 18.4 µm²
Pixel area = 4.29² = 18.4 µm²
HS50 EXR pixel area
Pixel pitch = 1.39 µm
Pixel area = 1.39² = 1.93 µm²
Pixel area = 1.39² = 1.93 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
Rebel T3i pixel density
Sensor resolution width = 5196 pixels
Sensor width = 2.23 cm
Pixel density = (5196 / 2.23)² / 1000000 = 5.43 MP/cm²
Sensor width = 2.23 cm
Pixel density = (5196 / 2.23)² / 1000000 = 5.43 MP/cm²
HS50 EXR pixel density
Sensor resolution width = 4612 pixels
Sensor width = 0.64 cm
Pixel density = (4612 / 0.64)² / 1000000 = 51.93 MP/cm²
Sensor width = 0.64 cm
Pixel density = (4612 / 0.64)² / 1000000 = 51.93 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Rebel T3i sensor resolution
Sensor width = 22.30 mm
Sensor height = 14.90 mm
Effective megapixels = 18.00
Resolution horizontal: X × r = 3464 × 1.5 = 5196
Resolution vertical: X = 3464
Sensor resolution = 5196 x 3464
Sensor height = 14.90 mm
Effective megapixels = 18.00
| r = 22.30/14.90 = 1.5 |
|
Resolution vertical: X = 3464
Sensor resolution = 5196 x 3464
HS50 EXR sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 16.00
Resolution horizontal: X × r = 3468 × 1.33 = 4612
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Sensor height = 4.80 mm
Effective megapixels = 16.00
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
Rebel T3i crop factor
Sensor diagonal in mm = 26.82 mm
| Crop factor = | 43.27 | = 1.61 |
| 26.82 |
HS50 EXR crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Rebel T3i equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon Rebel T3i, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon Rebel T3i is 1.61
Crop factor for Canon Rebel T3i is 1.61
HS50 EXR equivalent aperture
Crop factor = 5.41
Aperture = f2.8 - f5.6
35-mm equivalent aperture = (f2.8 - f5.6) × 5.41 = f15.1 - f30.3
Aperture = f2.8 - f5.6
35-mm equivalent aperture = (f2.8 - f5.6) × 5.41 = f15.1 - f30.3
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.