Canon IXY DIGITAL 450 vs. Canon EOS RP
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Canon IXY DIGITAL 450 | Canon EOS RP | ||||
| check price » | check price » | ||||
Megapixels
4.00
26.20
Max. image resolution
2272 x 1704
6240 x 4160
Sensor
Sensor type
CCD
CMOS
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
35.9 x 24 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 22.73 |
| (ratio) | ||
| Canon IXY DIGITAL 450 | Canon EOS RP | |
Surface area:
| 37.90 mm² | vs | 861.60 mm² |
Difference: 823.7 mm² (2173%)
RP sensor is approx. 22.73x bigger than IXY DIGITAL 450 sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 15 years between Canon IXY DIGITAL 450 (2004) and
Canon RP (2019).
Fifteen years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 23.34 µm² (246%)
A pixel on Canon RP sensor is approx. 246% bigger than a pixel on Canon IXY DIGITAL 450.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon IXY DIGITAL 450
Canon RP
Total megapixels
4.10
27.10
Effective megapixels
4.00
26.20
Optical zoom
3x
Digital zoom
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 100-40000 (extends to 50-102400)
RAW
Manual focus
Normal focus range
46 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
36 - 108 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f4.9
Metering
Multi, Center-weighted, Spot
Evaluative, Partial, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
No
Yes
Min. shutter speed
15 sec
30 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Electronic
White balance presets
5
6
Screen size
1.5"
3"
Screen resolution
118,000 dots
1,040,000 dots
Video capture
Max. video resolution
3840x2160 (25p/24p)
Storage types
Compact Flash (Type I)
SD/SDHC/SDXC
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-1LH Battery
LP-E17 lithium-ion battery
Weight
215 g
485 g
Dimensions
87 x 57 x 28 mm
132.5 x 85 x 70 mm
Year
2004
2019
Choose cameras to compare
Popular comparisons:
- Canon IXY DIGITAL 450 vs. Canon Digital IXUS 85 IS
- Canon IXY DIGITAL 450 vs. Canon EOS RP
- Canon IXY DIGITAL 450 vs. Canon IXUS 285 HS
- Canon IXY DIGITAL 450 vs. Canon PowerShot S5 IS
- Canon IXY DIGITAL 450 vs. Canon IXUS 160
- Canon IXY DIGITAL 450 vs. Canon IXY DIGITAL 1000
- Canon IXY DIGITAL 450 vs. Panasonic Lumix DMC-LX5
- Canon IXY DIGITAL 450 vs. Canon EOS 80D
- Canon IXY DIGITAL 450 vs. Canon IXY 50S
- Canon IXY DIGITAL 450 vs. Sony Cyber-shot DSC-T50
- Canon IXY DIGITAL 450 vs. Canon IXUS 150
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Canon IXY DIGITAL 450 diagonal
The diagonal of IXY DIGITAL 450 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Canon RP diagonal
w = 35.90 mm
h = 24.00 mm
h = 24.00 mm
| Diagonal = √ | 35.90² + 24.00² | = 43.18 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
IXY DIGITAL 450 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
RP sensor area
Width = 35.90 mm
Height = 24.00 mm
Surface area = 35.90 × 24.00 = 861.60 mm²
Height = 24.00 mm
Surface area = 35.90 × 24.00 = 861.60 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
IXY DIGITAL 450 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2306 pixels
Sensor resolution width = 2306 pixels
| Pixel pitch = | 7.11 | × 1000 | = 3.08 µm |
| 2306 |
RP pixel pitch
Sensor width = 35.90 mm
Sensor resolution width = 6269 pixels
Sensor resolution width = 6269 pixels
| Pixel pitch = | 35.90 | × 1000 | = 5.73 µm |
| 6269 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
IXY DIGITAL 450 pixel area
Pixel pitch = 3.08 µm
Pixel area = 3.08² = 9.49 µm²
Pixel area = 3.08² = 9.49 µm²
RP pixel area
Pixel pitch = 5.73 µm
Pixel area = 5.73² = 32.83 µm²
Pixel area = 5.73² = 32.83 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
IXY DIGITAL 450 pixel density
Sensor resolution width = 2306 pixels
Sensor width = 0.711 cm
Pixel density = (2306 / 0.711)² / 1000000 = 10.52 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2306 / 0.711)² / 1000000 = 10.52 MP/cm²
RP pixel density
Sensor resolution width = 6269 pixels
Sensor width = 3.59 cm
Pixel density = (6269 / 3.59)² / 1000000 = 3.05 MP/cm²
Sensor width = 3.59 cm
Pixel density = (6269 / 3.59)² / 1000000 = 3.05 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
IXY DIGITAL 450 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 4.00
Resolution horizontal: X × r = 1734 × 1.33 = 2306
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
Sensor height = 5.33 mm
Effective megapixels = 4.00
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
RP sensor resolution
Sensor width = 35.90 mm
Sensor height = 24.00 mm
Effective megapixels = 26.20
Resolution horizontal: X × r = 4179 × 1.5 = 6269
Resolution vertical: X = 4179
Sensor resolution = 6269 x 4179
Sensor height = 24.00 mm
Effective megapixels = 26.20
| r = 35.90/24.00 = 1.5 |
|
Resolution vertical: X = 4179
Sensor resolution = 6269 x 4179
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
IXY DIGITAL 450 crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
RP crop factor
Sensor diagonal in mm = 43.18 mm
| Crop factor = | 43.27 | = 1 |
| 43.18 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
IXY DIGITAL 450 equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 4.87 = f13.6 - f23.9
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 4.87 = f13.6 - f23.9
RP equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon RP, take the aperture of the lens
you're using and multiply it with crop factor.
Since crop factor for Canon RP is 1, the equivalent aperture is aperture.
Since crop factor for Canon RP is 1, the equivalent aperture is aperture.
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.