Canon IXY DIGITAL 900 IS vs. Canon IXUS 220 HS
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon IXY DIGITAL 900 IS | Canon IXUS 220 HS | ||||
check price » | check price » |
Megapixels
7.10
12.10
Max. image resolution
3072 x 2304
4000 x 3000
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.15 |
(ratio) | ||
Canon IXY DIGITAL 900 IS | Canon IXUS 220 HS |
Surface area:
24.84 mm² | vs | 28.46 mm² |
Difference: 3.62 mm² (15%)
IXUS 220 HS sensor is approx. 1.15x bigger than IXY DIGITAL 900 IS sensor.
Note: You are comparing cameras of different generations.
There is a 5 year gap between Canon IXY DIGITAL 900 IS (2006) and Canon IXUS 220 HS (2011).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.13 µm² (48%)
A pixel on Canon IXY DIGITAL 900 IS sensor is approx. 48% bigger than a pixel on Canon IXUS 220 HS.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon IXY DIGITAL 900 IS
Canon IXUS 220 HS
Total megapixels
Effective megapixels
7.10
12.10
Optical zoom
3.8x
5x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80 ,100, 200, 400, 800, 1600
Auto, 100 - 3200
RAW
Manual focus
Normal focus range
45 cm
40 cm
Macro focus range
3 cm
3 cm
Focal length (35mm equiv.)
28 - 105 mm
24 - 120 mm
Aperture priority
No
No
Max. aperture
f2.8 - f5.8
f2.7 - f5.9
Metering
Multi, Center-weighted, Spot
Centre weighted, Evaluative, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
15 sec
15 sec
Max. shutter speed
1/1600 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
None
White balance presets
5
6
Screen size
2.5"
2.7"
Screen resolution
207,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SD/SDHC/MMC card
SDHC, SDXC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-5L battery
Lithium-Ion NB-4L rechargeable battery
Weight
195 g
141 g
Dimensions
90 x 58 x 25 mm
92.2 x 55.9 x 19.5 mm
Year
2006
2011
Choose cameras to compare
Popular comparisons:
- Canon IXY DIGITAL 900 IS vs. Canon IXY DIGITAL 920 IS
- Canon IXY DIGITAL 900 IS vs. Canon Digital IXUS 900 Ti
- Canon IXY DIGITAL 900 IS vs. Canon IXY DIGITAL 110 IS
- Canon IXY DIGITAL 900 IS vs. Canon IXUS 220 HS
- Canon IXY DIGITAL 900 IS vs. Sony Cyber-shot DSC-WX500
- Canon IXY DIGITAL 900 IS vs. Canon PowerShot SD1000
- Canon IXY DIGITAL 900 IS vs. Canon PowerShot S95
- Canon IXY DIGITAL 900 IS vs. Canon IXUS 115 HS
- Canon IXY DIGITAL 900 IS vs. Canon PowerShot G7 X Mark II
- Canon IXY DIGITAL 900 IS vs. Canon PowerShot SX620 HS
- Canon IXY DIGITAL 900 IS vs. Canon PowerShot A3200 IS
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon IXY DIGITAL 900 IS diagonal
The diagonal of IXY DIGITAL 900 IS sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Canon IXUS 220 HS diagonal
The diagonal of IXUS 220 HS sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
IXY DIGITAL 900 IS sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
IXUS 220 HS sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
IXY DIGITAL 900 IS pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3072 pixels
Sensor resolution width = 3072 pixels
Pixel pitch = | 5.75 | × 1000 | = 1.87 µm |
3072 |
IXUS 220 HS pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4011 pixels
Sensor resolution width = 4011 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.54 µm |
4011 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
IXY DIGITAL 900 IS pixel area
Pixel pitch = 1.87 µm
Pixel area = 1.87² = 3.5 µm²
Pixel area = 1.87² = 3.5 µm²
IXUS 220 HS pixel area
Pixel pitch = 1.54 µm
Pixel area = 1.54² = 2.37 µm²
Pixel area = 1.54² = 2.37 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
IXY DIGITAL 900 IS pixel density
Sensor resolution width = 3072 pixels
Sensor width = 0.575 cm
Pixel density = (3072 / 0.575)² / 1000000 = 28.54 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3072 / 0.575)² / 1000000 = 28.54 MP/cm²
IXUS 220 HS pixel density
Sensor resolution width = 4011 pixels
Sensor width = 0.616 cm
Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
IXY DIGITAL 900 IS sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.10
Resolution horizontal: X × r = 2310 × 1.33 = 3072
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
Sensor height = 4.32 mm
Effective megapixels = 7.10
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
IXUS 220 HS sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.10
Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Sensor height = 4.62 mm
Effective megapixels = 12.10
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
IXY DIGITAL 900 IS crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
IXUS 220 HS crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
IXY DIGITAL 900 IS equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 6.02 = f16.9 - f34.9
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 6.02 = f16.9 - f34.9
IXUS 220 HS equivalent aperture
Crop factor = 5.62
Aperture = f2.7 - f5.9
35-mm equivalent aperture = (f2.7 - f5.9) × 5.62 = f15.2 - f33.2
Aperture = f2.7 - f5.9
35-mm equivalent aperture = (f2.7 - f5.9) × 5.62 = f15.2 - f33.2
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.