Canon IXY DIGITAL L2 vs. Olympus SP 570 UZ
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon IXY DIGITAL L2 | Olympus SP 570 UZ | ||||
check price » | check price » |
Megapixels
5.00
10.70
Max. image resolution
2592 x 1944
3648 x 2736
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.33" (~ 6.08 x 4.56 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.12 |
(ratio) | ||
Canon IXY DIGITAL L2 | Olympus SP 570 UZ |
Surface area:
24.84 mm² | vs | 27.72 mm² |
Difference: 2.88 mm² (12%)
SP 570 UZ sensor is approx. 1.12x bigger than IXY DIGITAL L2 sensor.
Note: You are comparing cameras of different generations.
There is a 4 year gap between Canon IXY DIGITAL L2 (2004) and Olympus SP 570 UZ (2008).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 2.38 µm² (92%)
A pixel on Canon IXY DIGITAL L2 sensor is approx. 92% bigger than a pixel on Olympus SP 570 UZ.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon IXY DIGITAL L2
Olympus SP 570 UZ
Total megapixels
5.20
Effective megapixels
5.00
Optical zoom
1x
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 50, 100, 200, 400, 800, 1600, 3200, 6400
RAW
Manual focus
Normal focus range
50 cm
10 cm
Macro focus range
3 cm
1 cm
Focal length (35mm equiv.)
39 mm
26 - 520 mm
Aperture priority
No
Yes
Max. aperture
f2.6 - f5.5
f2.8 - f4.5
Metering
Multi, Center-weighted, Spot
Centre weighted, ESP Digital, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
15 sec
480 sec
Max. shutter speed
1/1500 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
5
5
Screen size
1.5"
2.7"
Screen resolution
78,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SD/MMC card
xD Picture card
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-3L battery
4x AA
Weight
140 g
365 g
Dimensions
90 x 47 x 19 mm
116 x 78.5 x 78 mm
Year
2004
2008
Choose cameras to compare
Popular comparisons:
- Canon IXY DIGITAL L2 vs. Canon IXY DIGITAL L
- Canon IXY DIGITAL L2 vs. Canon Digital IXUS i
- Canon IXY DIGITAL L2 vs. Olympus SP 570 UZ
- Canon IXY DIGITAL L2 vs. Casio Exilim EX-S100
- Canon IXY DIGITAL L2 vs. Panasonic Lumix DMC-LX3
- Canon IXY DIGITAL L2 vs. Sanyo VPC S1085
- Canon IXY DIGITAL L2 vs. Pentax Optio S4i
- Canon IXY DIGITAL L2 vs. Panasonic Lumix DMC-FX07
- Canon IXY DIGITAL L2 vs. Canon IXY DIGITAL 920 IS
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon IXY DIGITAL L2 diagonal
The diagonal of IXY DIGITAL L2 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Olympus SP 570 UZ diagonal
The diagonal of SP 570 UZ sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
IXY DIGITAL L2 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
SP 570 UZ sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
IXY DIGITAL L2 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.23 µm |
2579 |
SP 570 UZ pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 3772 pixels
Sensor resolution width = 3772 pixels
Pixel pitch = | 6.08 | × 1000 | = 1.61 µm |
3772 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
IXY DIGITAL L2 pixel area
Pixel pitch = 2.23 µm
Pixel area = 2.23² = 4.97 µm²
Pixel area = 2.23² = 4.97 µm²
SP 570 UZ pixel area
Pixel pitch = 1.61 µm
Pixel area = 1.61² = 2.59 µm²
Pixel area = 1.61² = 2.59 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
IXY DIGITAL L2 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
SP 570 UZ pixel density
Sensor resolution width = 3772 pixels
Sensor width = 0.608 cm
Pixel density = (3772 / 0.608)² / 1000000 = 38.49 MP/cm²
Sensor width = 0.608 cm
Pixel density = (3772 / 0.608)² / 1000000 = 38.49 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
IXY DIGITAL L2 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 4.32 mm
Effective megapixels = 5.00
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
SP 570 UZ sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 10.70
Resolution horizontal: X × r = 2836 × 1.33 = 3772
Resolution vertical: X = 2836
Sensor resolution = 3772 x 2836
Sensor height = 4.56 mm
Effective megapixels = 10.70
r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 2836
Sensor resolution = 3772 x 2836
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
IXY DIGITAL L2 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
SP 570 UZ crop factor
Sensor diagonal in mm = 7.60 mm
Crop factor = | 43.27 | = 5.69 |
7.60 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
IXY DIGITAL L2 equivalent aperture
Crop factor = 6.02
Aperture = f2.6 - f5.5
35-mm equivalent aperture = (f2.6 - f5.5) × 6.02 = f15.7 - f33.1
Aperture = f2.6 - f5.5
35-mm equivalent aperture = (f2.6 - f5.5) × 6.02 = f15.7 - f33.1
SP 570 UZ equivalent aperture
Crop factor = 5.69
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 5.69 = f15.9 - f25.6
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 5.69 = f15.9 - f25.6
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.