Canon IXY DIGITAL vs. Canon IXUS 105
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon IXY DIGITAL | Canon IXUS 105 | ||||
check price » | check price » |
Megapixels
2.02
12.10
Max. image resolution
1600 x 1200
4000 x 3000
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.7" (~ 5.33 x 4 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.33 |
(ratio) | ||
Canon IXY DIGITAL | Canon IXUS 105 |
Surface area:
21.32 mm² | vs | 28.46 mm² |
Difference: 7.14 mm² (33%)
IXUS 105 sensor is approx. 1.33x bigger than IXY DIGITAL sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 10 years between Canon IXY DIGITAL (2000) and Canon IXUS 105 (2010).
Ten years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 8.19 µm² (346%)
A pixel on Canon IXY DIGITAL sensor is approx. 346% bigger than a pixel on Canon IXUS 105.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon IXY DIGITAL
Canon IXUS 105
Total megapixels
2.11
12.70
Effective megapixels
2.02
12.10
Optical zoom
2x
4x
Digital zoom
Yes
Yes
ISO sensitivity
100
Auto, 80, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
57 cm
50 cm
Macro focus range
10 cm
3 cm
Focal length (35mm equiv.)
35 - 70 mm
28 - 112 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.0
f2.8 - f5.9
Metering
Multi, Center-weighted, Spot
Centre weighted, Evaluative, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1 sec
15 sec
Max. shutter speed
1/1500 sec
1/1500 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
None
White balance presets
5
5
Screen size
1.5"
2.7"
Screen resolution
120,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
Compact Flash (Type I)
SDHC, SDXC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Canon Lithium-Ion
Lithium-Ion NB-6L battery
Weight
250 g
140 g
Dimensions
87 x 57 x 27 mm
90.5 x 55.8 x 21.2 mm
Year
2000
2010
Choose cameras to compare
Popular comparisons:
- Canon IXY DIGITAL vs. Canon IXUS 170
- Canon IXY DIGITAL vs. Canon IXY DIGITAL 50
- Canon IXY DIGITAL vs. Canon IXUS 285 HS
- Canon IXY DIGITAL vs. Canon EOS 5D Mark IV
- Canon IXY DIGITAL vs. Canon IXUS 160
- Canon IXY DIGITAL vs. Canon Digital IXUS 50
- Canon IXY DIGITAL vs. Canon IXUS 105
- Canon IXY DIGITAL vs. Panasonic Lumix DC-ZS70
- Canon IXY DIGITAL vs. Canon EOS R3
- Canon IXY DIGITAL vs. Canon IXY DIGITAL 930 IS
- Canon IXY DIGITAL vs. Nikon D5200
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon IXY DIGITAL diagonal
The diagonal of IXY DIGITAL sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Canon IXUS 105 diagonal
The diagonal of IXUS 105 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
IXY DIGITAL sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
IXUS 105 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
IXY DIGITAL pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 1639 pixels
Sensor resolution width = 1639 pixels
Pixel pitch = | 5.33 | × 1000 | = 3.25 µm |
1639 |
IXUS 105 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4011 pixels
Sensor resolution width = 4011 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.54 µm |
4011 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
IXY DIGITAL pixel area
Pixel pitch = 3.25 µm
Pixel area = 3.25² = 10.56 µm²
Pixel area = 3.25² = 10.56 µm²
IXUS 105 pixel area
Pixel pitch = 1.54 µm
Pixel area = 1.54² = 2.37 µm²
Pixel area = 1.54² = 2.37 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
IXY DIGITAL pixel density
Sensor resolution width = 1639 pixels
Sensor width = 0.533 cm
Pixel density = (1639 / 0.533)² / 1000000 = 9.46 MP/cm²
Sensor width = 0.533 cm
Pixel density = (1639 / 0.533)² / 1000000 = 9.46 MP/cm²
IXUS 105 pixel density
Sensor resolution width = 4011 pixels
Sensor width = 0.616 cm
Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
IXY DIGITAL sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 2.02
Resolution horizontal: X × r = 1232 × 1.33 = 1639
Resolution vertical: X = 1232
Sensor resolution = 1639 x 1232
Sensor height = 4.00 mm
Effective megapixels = 2.02
r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 1232
Sensor resolution = 1639 x 1232
IXUS 105 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.10
Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Sensor height = 4.62 mm
Effective megapixels = 12.10
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
IXY DIGITAL crop factor
Sensor diagonal in mm = 6.66 mm
Crop factor = | 43.27 | = 6.5 |
6.66 |
IXUS 105 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
IXY DIGITAL equivalent aperture
Crop factor = 6.5
Aperture = f2.8 - f4.0
35-mm equivalent aperture = (f2.8 - f4.0) × 6.5 = f18.2 - f26
Aperture = f2.8 - f4.0
35-mm equivalent aperture = (f2.8 - f4.0) × 6.5 = f18.2 - f26
IXUS 105 equivalent aperture
Crop factor = 5.62
Aperture = f2.8 - f5.9
35-mm equivalent aperture = (f2.8 - f5.9) × 5.62 = f15.7 - f33.2
Aperture = f2.8 - f5.9
35-mm equivalent aperture = (f2.8 - f5.9) × 5.62 = f15.7 - f33.2
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.