Canon PowerShot A1300 vs. Canon PowerShot A630

Comparison

change cameras »

Canon PowerShot A1300

Canon PowerShot A630

check price »

Megapixels

16.00

8.00

Max. image resolution

4608 x 3456

3264 x 2448

Sensor

Sensor type

CCD

Sensor size

1/2.3" (~ 6.16 x 4.62 mm)

1/1.8" (~ 7.11 x 5.33 mm)

Sensor resolution

4612 x 3468

3262 x 2453

Diagonal

7.70 mm

8.89 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	1.33
(ratio)

Canon PowerShot A1300		Canon PowerShot A630

Surface area:

28.46 mm²

37.90 mm²

Difference: 9.44 mm² (33%)

A630 sensor is approx. 1.33x bigger than A1300 sensor.

Note: You are comparing sensors of very different generations. There is a gap of 6 years between Canon A1300 (2012) and Canon A630 (2006). Six years is a lot of time in terms of technology, meaning newer sensors are overall much more efficient than the older ones.

Pixel pitch

1.34 µm

2.18 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 0.84 µm (63%)

Pixel pitch of A630 is approx. 63% higher than pixel pitch of A1300.

Pixel area

1.8 µm²

4.75 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 2.95 µm² (164%)

A pixel on Canon A630 sensor is approx. 164% bigger than a pixel on Canon A1300.

Pixel density

56.06 MP/cm²

21.05 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 35.01 µm (166%)

Canon A1300 has approx. 166% higher pixel density than Canon A630.

To learn about the accuracy of these numbers, click here.

Specs

Canon A1300

Canon A630

Crop factor

5.62

4.87

Total megapixels

8.20

Effective megapixels

16.00

8.00

Optical zoom

Digital zoom

Yes

ISO sensitivity

Auto, 100, 200, 400, 800, 1600

Auto, 80, 100, 200, 400, 800

RAW

Manual focus

Normal focus range

40 cm

Macro focus range

3 cm

1 cm

Focal length (35mm equiv.)

28 - 140 mm

35 - 140 mm

Aperture priority

Yes

Max. aperture

f2.8 - f6.9

f2.8 - f4.1

Max. aperture (35mm equiv.)

f15.7 - f38.8

f13.6 - f20

Metering

Centre weighted, Evaluative, Spot

Centre weighted, Matrix, Spot

Exposure compensation

±2 EV (in 1/3 EV steps)

Shutter priority

Yes

Min. shutter speed

15 sec

Max. shutter speed

1/2000 sec

1/2500 sec

Built-in flash

External flash

Viewfinder

Optical (tunnel)

White balance presets

Screen size

2.7"

2.5"

Screen resolution

230,000 dots

115,000 dots

Video capture

Max. video resolution

Storage types

SDHC, SDXC, Secure Digital

MultiMedia, Secure Digital

USB

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

2 x AA batteries

AA NiMH (4) batteries included

Weight

174 g

327 g

Dimensions

94.7 x 61.7 x 29.8 mm

110 x 66 x 49 mm

Year

2012

2006

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Canon A1300 diagonal

The diagonal of A1300 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm

Diagonal = √

6.16² + 4.62²

= 7.70 mm

Canon A630 diagonal

The diagonal of A630 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of that value - 8.89 mm. If you want to know why, see sensor sizes.

w = 7.11 mm
h = 5.33 mm

Diagonal = √

7.11² + 5.33²

= 8.89 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

A1300 sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²

A630 sensor area

Width = 7.11 mm
Height = 5.33 mm

Surface area = 7.11 × 5.33 = 37.90 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

A1300 pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 4612 pixels

Pixel pitch =	6.16	× 1000	= 1.34 µm
	4612

A630 pixel pitch

Sensor width = 7.11 mm
Sensor resolution width = 3262 pixels

Pixel pitch =	7.11	× 1000	= 2.18 µm
	3262

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

A1300 pixel area

Pixel pitch = 1.34 µm

Pixel area = 1.34² = 1.8 µm²

A630 pixel area

Pixel pitch = 2.18 µm

Pixel area = 2.18² = 4.75 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

A1300 pixel density

Sensor resolution width = 4612 pixels
Sensor width = 0.616 cm

Pixel density = (4612 / 0.616)² / 1000000 = 56.06 MP/cm²

A630 pixel density

Sensor resolution width = 3262 pixels
Sensor width = 0.711 cm

Pixel density = (3262 / 0.711)² / 1000000 = 21.05 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

A1300 sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.00

r = 6.16/4.62 = 1.33

X = √	16.00 × 1000000	= 3468
	1.33

Resolution horizontal: X × r = 3468 × 1.33 = 4612
Resolution vertical: X = 3468

Sensor resolution = 4612 x 3468

A630 sensor resolution

Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 8.00

r = 7.11/5.33 = 1.33

X = √	8.00 × 1000000	= 2453
	1.33

Resolution horizontal: X × r = 2453 × 1.33 = 3262
Resolution vertical: X = 2453

Sensor resolution = 3262 x 2453

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

A1300 crop factor

Sensor diagonal in mm = 7.70 mm

Crop factor =	43.27	= 5.62
	7.70

A630 crop factor

Sensor diagonal in mm = 8.89 mm

Crop factor =	43.27	= 4.87
	8.89

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

A1300 equivalent aperture

Crop factor = 5.62
Aperture = f2.8 - f6.9

35-mm equivalent aperture = (f2.8 - f6.9) × 5.62 = f15.7 - f38.8

A630 equivalent aperture

Crop factor = 4.87
Aperture = f2.8 - f4.1

35-mm equivalent aperture = (f2.8 - f4.1) × 4.87 = f13.6 - f20

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.