Canon PowerShot A470 vs. Canon PowerShot A460
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon PowerShot A470 | Canon PowerShot A460 | ||||
check price » | check price » |
Megapixels
7.10
5.00
Max. image resolution
3072 x 2304
2592 x 1944
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/3" (~ 4.8 x 3.6 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.44 | : | 1 |
(ratio) | ||
Canon PowerShot A470 | Canon PowerShot A460 |
Surface area:
24.84 mm² | vs | 17.28 mm² |
Difference: 7.56 mm² (44%)
A470 sensor is approx. 1.44x bigger than A460 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.04 µm² (1%)
A pixel on Canon A470 sensor is approx. 1% bigger than a pixel on Canon A460.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon A470
Canon A460
Total megapixels
5.20
Effective megapixels
7.10
5.00
Optical zoom
3.5x
4x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600
Auto, 80, 100, 200, 400
RAW
Manual focus
Normal focus range
40 cm
45 cm
Macro focus range
1 cm
1 cm
Focal length (35mm equiv.)
38 - 132 mm
38 - 152 mm
Aperture priority
No
No
Max. aperture
f3 - f5.8
f2.8 - f5.8
Metering
Centre weighted, Evaluative, Spot
Centre weighted, Evaluative, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
15 sec
15 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
Optical (tunnel)
White balance presets
6
6
Screen size
2.5"
2"
Screen resolution
115,000 dots
86,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 1.0
HDMI
Wireless
GPS
Battery
AA (2) batteries (NiMH recommended)
AA (2) batteries (NiMH recommended)
Weight
165 g
165 g
Dimensions
104.8 x 55.1 x 40.7 mm
106 x 51.8 x 40.2 mm
Year
2008
2007
Choose cameras to compare
Popular comparisons:
- Canon PowerShot A470 vs. Canon PowerShot A460
- Canon PowerShot A470 vs. Canon PowerShot A480
- Canon PowerShot A470 vs. Sony Cyber-shot DSC-W120
- Canon PowerShot A470 vs. Canon Digital IXUS 60
- Canon PowerShot A470 vs. Panasonic Lumix DMC-LX5
- Canon PowerShot A470 vs. Canon PowerShot A570 IS
- Canon PowerShot A470 vs. Sony Cyber-shot DSC-W50
- Canon PowerShot A470 vs. Canon PowerShot SX130 IS
- Canon PowerShot A470 vs. Sony Cyber-shot DSC-S930
- Canon PowerShot A470 vs. Canon PowerShot SD1000
- Canon PowerShot A470 vs. Canon PowerShot A495
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon A470 diagonal
The diagonal of A470 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Canon A460 diagonal
The diagonal of A460 sensor is not 1/3 or 0.33" (8.5 mm) as you might expect, but approximately two thirds of
that value - 6 mm. If you want to know why, see
sensor sizes.
w = 4.80 mm
h = 3.60 mm
w = 4.80 mm
h = 3.60 mm
Diagonal = √ | 4.80² + 3.60² | = 6.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
A470 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
A460 sensor area
Width = 4.80 mm
Height = 3.60 mm
Surface area = 4.80 × 3.60 = 17.28 mm²
Height = 3.60 mm
Surface area = 4.80 × 3.60 = 17.28 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
A470 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3072 pixels
Sensor resolution width = 3072 pixels
Pixel pitch = | 5.75 | × 1000 | = 1.87 µm |
3072 |
A460 pixel pitch
Sensor width = 4.80 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
Pixel pitch = | 4.80 | × 1000 | = 1.86 µm |
2579 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
A470 pixel area
Pixel pitch = 1.87 µm
Pixel area = 1.87² = 3.5 µm²
Pixel area = 1.87² = 3.5 µm²
A460 pixel area
Pixel pitch = 1.86 µm
Pixel area = 1.86² = 3.46 µm²
Pixel area = 1.86² = 3.46 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
A470 pixel density
Sensor resolution width = 3072 pixels
Sensor width = 0.575 cm
Pixel density = (3072 / 0.575)² / 1000000 = 28.54 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3072 / 0.575)² / 1000000 = 28.54 MP/cm²
A460 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.48 cm
Pixel density = (2579 / 0.48)² / 1000000 = 28.87 MP/cm²
Sensor width = 0.48 cm
Pixel density = (2579 / 0.48)² / 1000000 = 28.87 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
A470 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.10
Resolution horizontal: X × r = 2310 × 1.33 = 3072
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
Sensor height = 4.32 mm
Effective megapixels = 7.10
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
A460 sensor resolution
Sensor width = 4.80 mm
Sensor height = 3.60 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 3.60 mm
Effective megapixels = 5.00
r = 4.80/3.60 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
A470 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
A460 crop factor
Sensor diagonal in mm = 6.00 mm
Crop factor = | 43.27 | = 7.21 |
6.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
A470 equivalent aperture
Crop factor = 6.02
Aperture = f3 - f5.8
35-mm equivalent aperture = (f3 - f5.8) × 6.02 = f18.1 - f34.9
Aperture = f3 - f5.8
35-mm equivalent aperture = (f3 - f5.8) × 6.02 = f18.1 - f34.9
A460 equivalent aperture
Crop factor = 7.21
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 7.21 = f20.2 - f41.8
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 7.21 = f20.2 - f41.8
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.