Canon PowerShot A640 vs. Canon PowerShot A630

Comparison

change cameras »
PowerShot A640 image
vs
PowerShot A630 image
Canon PowerShot A640 Canon PowerShot A630
check price » check price »
Megapixels
10.00
8.00
Max. image resolution
3648 x 2736
3264 x 2448

Sensor

Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/1.8" (~ 7.11 x 5.33 mm)
Sensor resolution
3647 x 2742
3262 x 2453
Diagonal
8.89 mm
8.89 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1
(ratio)
Canon PowerShot A640 Canon PowerShot A630
Surface area:
37.90 mm² vs 37.90 mm²
Difference: 0 mm² (0%)
A640 and A630 sensors are the same size.
Pixel pitch
1.95 µm
2.18 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.23 µm (12%)
Pixel pitch of A630 is approx. 12% higher than pixel pitch of A640.
Pixel area
3.8 µm²
4.75 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.95 µm² (25%)
A pixel on Canon A630 sensor is approx. 25% bigger than a pixel on Canon A640.
Pixel density
26.31 MP/cm²
21.05 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 5.26 µm (25%)
Canon A640 has approx. 25% higher pixel density than Canon A630.
To learn about the accuracy of these numbers, click here.



Specs

Canon A640
Canon A630
Crop factor
4.87
4.87
Total megapixels
10.30
8.20
Effective megapixels
10.00
8.00
Optical zoom
4x
4x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80, 100, 200, 400, 800
Auto, 80, 100, 200, 400, 800
RAW
Manual focus
Normal focus range
40 cm
40 cm
Macro focus range
1 cm
1 cm
Focal length (35mm equiv.)
35 - 140 mm
35 - 140 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f4.1
f2.8 - f4.1
Max. aperture (35mm equiv.)
f13.6 - f20
f13.6 - f20
Metering
Centre weighted, Matrix, Spot
Centre weighted, Matrix, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
15 sec
15 sec
Max. shutter speed
1/2500 sec
1/2500 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
6
6
Screen size
2.5"
2.5"
Screen resolution
115,000 dots
115,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
MultiMedia, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
AA NiMH (4) batteries included
Weight
327 g
327 g
Dimensions
110 x 66 x 49 mm
110 x 66 x 49 mm
Year
2006
2006




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Canon A640 diagonal

The diagonal of A640 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of that value - 8.89 mm. If you want to know why, see sensor sizes.

w = 7.11 mm
h = 5.33 mm
Diagonal =  7.11² + 5.33²   = 8.89 mm

Canon A630 diagonal

The diagonal of A630 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of that value - 8.89 mm. If you want to know why, see sensor sizes.

w = 7.11 mm
h = 5.33 mm
Diagonal =  7.11² + 5.33²   = 8.89 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

A640 sensor area

Width = 7.11 mm
Height = 5.33 mm

Surface area = 7.11 × 5.33 = 37.90 mm²

A630 sensor area

Width = 7.11 mm
Height = 5.33 mm

Surface area = 7.11 × 5.33 = 37.90 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

A640 pixel pitch

Sensor width = 7.11 mm
Sensor resolution width = 3647 pixels
Pixel pitch =   7.11  × 1000  = 1.95 µm
3647

A630 pixel pitch

Sensor width = 7.11 mm
Sensor resolution width = 3262 pixels
Pixel pitch =   7.11  × 1000  = 2.18 µm
3262


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

A640 pixel area

Pixel pitch = 1.95 µm

Pixel area = 1.95² = 3.8 µm²

A630 pixel area

Pixel pitch = 2.18 µm

Pixel area = 2.18² = 4.75 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

A640 pixel density

Sensor resolution width = 3647 pixels
Sensor width = 0.711 cm

Pixel density = (3647 / 0.711)² / 1000000 = 26.31 MP/cm²

A630 pixel density

Sensor resolution width = 3262 pixels
Sensor width = 0.711 cm

Pixel density = (3262 / 0.711)² / 1000000 = 21.05 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

A640 sensor resolution

Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 10.00
r = 7.11/5.33 = 1.33
X =  10.00 × 1000000  = 2742
1.33
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742

Sensor resolution = 3647 x 2742

A630 sensor resolution

Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 8.00
r = 7.11/5.33 = 1.33
X =  8.00 × 1000000  = 2453
1.33
Resolution horizontal: X × r = 2453 × 1.33 = 3262
Resolution vertical: X = 2453

Sensor resolution = 3262 x 2453


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


A640 crop factor

Sensor diagonal in mm = 8.89 mm
Crop factor =   43.27  = 4.87
8.89

A630 crop factor

Sensor diagonal in mm = 8.89 mm
Crop factor =   43.27  = 4.87
8.89

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

A640 equivalent aperture

Crop factor = 4.87
Aperture = f2.8 - f4.1

35-mm equivalent aperture = (f2.8 - f4.1) × 4.87 = f13.6 - f20

A630 equivalent aperture

Crop factor = 4.87
Aperture = f2.8 - f4.1

35-mm equivalent aperture = (f2.8 - f4.1) × 4.87 = f13.6 - f20

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.