Canon PowerShot G1 X vs. Sony Cyber-shot DSC-RX100 II
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon PowerShot G1 X | Sony Cyber-shot DSC-RX100 II | ||||
check price » | check price » |
Megapixels
14.30
20.20
Max. image resolution
4352 x 3264
5472 x 3648
Sensor
Sensor type
CMOS
CMOS
Sensor size
1.5" (~ 18.7 x 14 mm)
13.2 x 8.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
2.25 | : | 1 |
(ratio) | ||
Canon PowerShot G1 X | Sony Cyber-shot DSC-RX100 II |
Surface area:
261.80 mm² | vs | 116.16 mm² |
Difference: 145.64 mm² (125%)
G1 X sensor is approx. 2.25x bigger than RX100 II sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 12.47 µm² (216%)
A pixel on Canon G1 X sensor is approx. 216% bigger than a pixel on Sony RX100 II.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon G1 X
Sony RX100 II
Total megapixels
15.00
20.90
Effective megapixels
14.30
20.20
Optical zoom
4x
3.6x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 50, 1600, 2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12800
Auto, 100, 200, 400, 800, 1600, 3200, 6400, 12800, 25600
RAW
Manual focus
Normal focus range
40 cm
Macro focus range
20 cm
5 cm
Focal length (35mm equiv.)
28 - 112 mm
28 - 100 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f5.8
f1.8 - f4.9
Metering
Centre weighted, Evaluative, Spot
Multi, Center-weighted, Spot
Exposure compensation
±3 EV (in 1/3 EV, 1/2 EV steps)
±3 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
60 sec
30 sec
Max. shutter speed
1/4000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Electronic (optional)
White balance presets
7
9
Screen size
3"
3"
Screen resolution
920,000 dots
1,228,800 dots
Video capture
Max. video resolution
1920x1080 (24p)
1920x1080 (60p/60i/24p)
Storage types
SDHC, SDXC, Secure Digital
SD/SDHC/SDXC, Memory Stick Duo/Pro Duo/Pro-HG Duo
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-10L rechargeable battery
Lithium-Ion NP-BX1 battery
Weight
534 g
281 g
Dimensions
116.7 x 80.5 x 64.7 mm
101.6 x 58.1 x 38.3 mm
Year
2012
2013
Choose cameras to compare
Popular comparisons:
- Canon PowerShot G1 X vs. Sony Cyber-shot DSC-RX100
- Canon PowerShot G1 X vs. Nikon Coolpix P7700
- Canon PowerShot G1 X vs. Canon PowerShot G15
- Canon PowerShot G1 X vs. Panasonic Lumix DMC-LX7
- Canon PowerShot G1 X vs. Canon PowerShot G1 X Mark II
- Canon PowerShot G1 X vs. Canon PowerShot G16
- Canon PowerShot G1 X vs. Panasonic Lumix DMC-LX100
- Canon PowerShot G1 X vs. Canon PowerShot SX50 HS
- Canon PowerShot G1 X vs. Panasonic Lumix DMC-GX1
- Canon PowerShot G1 X vs. Sony Cyber-shot DSC-RX100 II
- Canon PowerShot G1 X vs. Canon EOS M
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon G1 X diagonal
The diagonal of G1 X sensor is not 1.5" (38.1 mm) as you might expect, but approximately two thirds of
that value - 23.36 mm. If you want to know why, see
sensor sizes.
w = 18.70 mm
h = 14.00 mm
w = 18.70 mm
h = 14.00 mm
Diagonal = √ | 18.70² + 14.00² | = 23.36 mm |
Sony RX100 II diagonal
w = 13.20 mm
h = 8.80 mm
h = 8.80 mm
Diagonal = √ | 13.20² + 8.80² | = 15.86 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
G1 X sensor area
Width = 18.70 mm
Height = 14.00 mm
Surface area = 18.70 × 14.00 = 261.80 mm²
Height = 14.00 mm
Surface area = 18.70 × 14.00 = 261.80 mm²
RX100 II sensor area
Width = 13.20 mm
Height = 8.80 mm
Surface area = 13.20 × 8.80 = 116.16 mm²
Height = 8.80 mm
Surface area = 13.20 × 8.80 = 116.16 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
G1 X pixel pitch
Sensor width = 18.70 mm
Sensor resolution width = 4378 pixels
Sensor resolution width = 4378 pixels
Pixel pitch = | 18.70 | × 1000 | = 4.27 µm |
4378 |
RX100 II pixel pitch
Sensor width = 13.20 mm
Sensor resolution width = 5505 pixels
Sensor resolution width = 5505 pixels
Pixel pitch = | 13.20 | × 1000 | = 2.4 µm |
5505 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
G1 X pixel area
Pixel pitch = 4.27 µm
Pixel area = 4.27² = 18.23 µm²
Pixel area = 4.27² = 18.23 µm²
RX100 II pixel area
Pixel pitch = 2.4 µm
Pixel area = 2.4² = 5.76 µm²
Pixel area = 2.4² = 5.76 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
G1 X pixel density
Sensor resolution width = 4378 pixels
Sensor width = 1.87 cm
Pixel density = (4378 / 1.87)² / 1000000 = 5.48 MP/cm²
Sensor width = 1.87 cm
Pixel density = (4378 / 1.87)² / 1000000 = 5.48 MP/cm²
RX100 II pixel density
Sensor resolution width = 5505 pixels
Sensor width = 1.32 cm
Pixel density = (5505 / 1.32)² / 1000000 = 17.39 MP/cm²
Sensor width = 1.32 cm
Pixel density = (5505 / 1.32)² / 1000000 = 17.39 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
G1 X sensor resolution
Sensor width = 18.70 mm
Sensor height = 14.00 mm
Effective megapixels = 14.30
Resolution horizontal: X × r = 3267 × 1.34 = 4378
Resolution vertical: X = 3267
Sensor resolution = 4378 x 3267
Sensor height = 14.00 mm
Effective megapixels = 14.30
r = 18.70/14.00 = 1.34 |
|
Resolution vertical: X = 3267
Sensor resolution = 4378 x 3267
RX100 II sensor resolution
Sensor width = 13.20 mm
Sensor height = 8.80 mm
Effective megapixels = 20.20
Resolution horizontal: X × r = 3670 × 1.5 = 5505
Resolution vertical: X = 3670
Sensor resolution = 5505 x 3670
Sensor height = 8.80 mm
Effective megapixels = 20.20
r = 13.20/8.80 = 1.5 |
|
Resolution vertical: X = 3670
Sensor resolution = 5505 x 3670
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
G1 X crop factor
Sensor diagonal in mm = 23.36 mm
Crop factor = | 43.27 | = 1.85 |
23.36 |
RX100 II crop factor
Sensor diagonal in mm = 15.86 mm
Crop factor = | 43.27 | = 2.73 |
15.86 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
G1 X equivalent aperture
Crop factor = 1.85
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 1.85 = f5.2 - f10.7
Aperture = f2.8 - f5.8
35-mm equivalent aperture = (f2.8 - f5.8) × 1.85 = f5.2 - f10.7
RX100 II equivalent aperture
Crop factor = 2.73
Aperture = f1.8 - f4.9
35-mm equivalent aperture = (f1.8 - f4.9) × 2.73 = f4.9 - f13.4
Aperture = f1.8 - f4.9
35-mm equivalent aperture = (f1.8 - f4.9) × 2.73 = f4.9 - f13.4
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.