Canon PowerShot G2 vs. Leica Digilux 2
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon PowerShot G2 | Leica Digilux 2 | ||||
check price » | check price » |
Megapixels
3.90
4.90
Max. image resolution
2272 x 1704
2560 x 1920
Sensor
Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
2/3" (~ 8.8 x 6.6 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.53 |
(ratio) | ||
Canon PowerShot G2 | Leica Digilux 2 |
Surface area:
37.90 mm² | vs | 58.08 mm² |
Difference: 20.18 mm² (53%)
Digilux 2 sensor is approx. 1.53x bigger than G2 sensor.
Note: You are comparing cameras of different generations.
There is a 2 year gap between Canon G2 (2001) and Leica Digilux 2 (2003).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 2.17 µm² (22%)
A pixel on Leica Digilux 2 sensor is approx. 22% bigger than a pixel on Canon G2.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon G2
Leica Digilux 2
Total megapixels
4.10
5.20
Effective megapixels
3.90
4.90
Optical zoom
3x
3.2x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
100, 200, 400
RAW
Manual focus
Normal focus range
70 cm
30 cm
Macro focus range
6 cm
30 cm
Focal length (35mm equiv.)
34 - 102 mm
28 - 90 mm
Aperture priority
Yes
Yes
Max. aperture
f2.0 - f2.5
f2.0 - f2.4
Metering
Centre weighted, Spot, Spot-AF
Centre weighted, Multi-segment, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
15 sec
8 sec
Max. shutter speed
1/1000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Electronic
White balance presets
6
7
Screen size
1.8"
2.5"
Screen resolution
113,578 dots
211,000 dots
Video capture
Max. video resolution
Storage types
CompactFlash type I, CompactFlash type II, Microdrive
MultiMedia, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Canon Lithium-Ion
Lithium-Ion 1400 mAh supplied
Weight
510 g
630 g
Dimensions
120.9 x 76.6 x 63.8 mm
135 x 82 x 103 mm
Year
2001
2003
Choose cameras to compare
Popular comparisons:
- Canon PowerShot G2 vs. Minolta DiMAGE F100
- Canon PowerShot G2 vs. Canon PowerShot G6
- Canon PowerShot G2 vs. Canon PowerShot G3
- Canon PowerShot G2 vs. Leica Digilux 2
- Canon PowerShot G2 vs. Canon PowerShot G12
- Canon PowerShot G2 vs. Canon PowerShot G5
- Canon PowerShot G2 vs. Nikon D800E
- Canon PowerShot G2 vs. Canon PowerShot G1 X
- Canon PowerShot G2 vs. Canon PowerShot S95
- Canon PowerShot G2 vs. Panasonic Lumix DMC-LX7
- Canon PowerShot G2 vs. Olympus C-5050 Zoom
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon G2 diagonal
The diagonal of G2 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Leica Digilux 2 diagonal
The diagonal of Digilux 2 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
G2 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Digilux 2 sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
G2 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2277 pixels
Sensor resolution width = 2277 pixels
Pixel pitch = | 7.11 | × 1000 | = 3.12 µm |
2277 |
Digilux 2 pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 2552 pixels
Sensor resolution width = 2552 pixels
Pixel pitch = | 8.80 | × 1000 | = 3.45 µm |
2552 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
G2 pixel area
Pixel pitch = 3.12 µm
Pixel area = 3.12² = 9.73 µm²
Pixel area = 3.12² = 9.73 µm²
Digilux 2 pixel area
Pixel pitch = 3.45 µm
Pixel area = 3.45² = 11.9 µm²
Pixel area = 3.45² = 11.9 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
G2 pixel density
Sensor resolution width = 2277 pixels
Sensor width = 0.711 cm
Pixel density = (2277 / 0.711)² / 1000000 = 10.26 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2277 / 0.711)² / 1000000 = 10.26 MP/cm²
Digilux 2 pixel density
Sensor resolution width = 2552 pixels
Sensor width = 0.88 cm
Pixel density = (2552 / 0.88)² / 1000000 = 8.41 MP/cm²
Sensor width = 0.88 cm
Pixel density = (2552 / 0.88)² / 1000000 = 8.41 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
G2 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 3.90
Resolution horizontal: X × r = 1712 × 1.33 = 2277
Resolution vertical: X = 1712
Sensor resolution = 2277 x 1712
Sensor height = 5.33 mm
Effective megapixels = 3.90
r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1712
Sensor resolution = 2277 x 1712
Digilux 2 sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 4.90
Resolution horizontal: X × r = 1919 × 1.33 = 2552
Resolution vertical: X = 1919
Sensor resolution = 2552 x 1919
Sensor height = 6.60 mm
Effective megapixels = 4.90
r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 1919
Sensor resolution = 2552 x 1919
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
G2 crop factor
Sensor diagonal in mm = 8.89 mm
Crop factor = | 43.27 | = 4.87 |
8.89 |
Digilux 2 crop factor
Sensor diagonal in mm = 11.00 mm
Crop factor = | 43.27 | = 3.93 |
11.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
G2 equivalent aperture
Crop factor = 4.87
Aperture = f2.0 - f2.5
35-mm equivalent aperture = (f2.0 - f2.5) × 4.87 = f9.7 - f12.2
Aperture = f2.0 - f2.5
35-mm equivalent aperture = (f2.0 - f2.5) × 4.87 = f9.7 - f12.2
Digilux 2 equivalent aperture
Crop factor = 3.93
Aperture = f2.0 - f2.4
35-mm equivalent aperture = (f2.0 - f2.4) × 3.93 = f7.9 - f9.4
Aperture = f2.0 - f2.4
35-mm equivalent aperture = (f2.0 - f2.4) × 3.93 = f7.9 - f9.4
More comparisons of Canon G2:
- Canon PowerShot G2 vs. Canon PowerShot G1 X Mark II
- Canon PowerShot G2 vs. Nikon D5100
- Canon PowerShot G2 vs. Canon PowerShot G10
- Canon PowerShot G2 vs. Canon PowerShot G15
- Canon PowerShot G2 vs. Leica Digilux 1
- Canon PowerShot G2 vs. Nikon Coolpix S6
- Canon PowerShot G2 vs. Canon PowerShot A610
- Canon PowerShot G2 vs. Canon PowerShot SD980 IS
- Canon PowerShot G2 vs. Canon PowerShot S2 IS
- Canon PowerShot G2 vs. Pentax 645D
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.