Canon PowerShot G5 vs. Canon PowerShot G2

Comparison

change cameras »
PowerShot G5 image
vs
PowerShot G2 image
Canon PowerShot G5 Canon PowerShot G2
check price » check price »
Megapixels
5.00
3.90
Max. image resolution
2592 x 1944
2272 x 1704

Sensor

Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/1.8" (~ 7.11 x 5.33 mm)
Sensor resolution
2579 x 1939
2277 x 1712
Diagonal
8.89 mm
8.89 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1
(ratio)
Canon PowerShot G5 Canon PowerShot G2
Surface area:
37.90 mm² vs 37.90 mm²
Difference: 0 mm² (0%)
G5 and G2 sensors are the same size.
Note: You are comparing cameras of different generations. There is a 2 year gap between Canon G5 (2003) and Canon G2 (2001). All things being equal, newer sensor generations generally outperform the older.
Pixel pitch
2.76 µm
3.12 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.36 µm (13%)
Pixel pitch of G2 is approx. 13% higher than pixel pitch of G5.
Pixel area
7.62 µm²
9.73 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 2.11 µm² (28%)
A pixel on Canon G2 sensor is approx. 28% bigger than a pixel on Canon G5.
Pixel density
13.16 MP/cm²
10.26 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 2.9 µm (28%)
Canon G5 has approx. 28% higher pixel density than Canon G2.
To learn about the accuracy of these numbers, click here.



Specs

Canon G5
Canon G2
Crop factor
4.87
4.87
Total megapixels
5.20
4.10
Effective megapixels
5.00
3.90
Optical zoom
4x
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 50, 100, 200, 400
RAW
Manual focus
Normal focus range
50 cm
70 cm
Macro focus range
5 cm
6 cm
Focal length (35mm equiv.)
35 - 140 mm
34 - 102 mm
Aperture priority
Yes
Yes
Max. aperture
f2.0 - f3.0
f2.0 - f2.5
Max. aperture (35mm equiv.)
f9.7 - f14.6
f9.7 - f12.2
Metering
Centre weighted, Evaluative, Spot
Centre weighted, Spot, Spot-AF
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
15 sec
15 sec
Max. shutter speed
1/2000 sec
1/1000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
6
6
Screen size
1.8"
1.8"
Screen resolution
118,000 dots
113,578 dots
Video capture
Max. video resolution
Storage types
CompactFlash type I, CompactFlash type II, Microdrive
CompactFlash type I, CompactFlash type II, Microdrive
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
Canon Lithium-Ion
Canon Lithium-Ion
Weight
410 g
510 g
Dimensions
121 x 73.9 x 69.9 mm
120.9 x 76.6 x 63.8 mm
Year
2003
2001




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Canon G5 diagonal

The diagonal of G5 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of that value - 8.89 mm. If you want to know why, see sensor sizes.

w = 7.11 mm
h = 5.33 mm
Diagonal =  7.11² + 5.33²   = 8.89 mm

Canon G2 diagonal

The diagonal of G2 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of that value - 8.89 mm. If you want to know why, see sensor sizes.

w = 7.11 mm
h = 5.33 mm
Diagonal =  7.11² + 5.33²   = 8.89 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

G5 sensor area

Width = 7.11 mm
Height = 5.33 mm

Surface area = 7.11 × 5.33 = 37.90 mm²

G2 sensor area

Width = 7.11 mm
Height = 5.33 mm

Surface area = 7.11 × 5.33 = 37.90 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

G5 pixel pitch

Sensor width = 7.11 mm
Sensor resolution width = 2579 pixels
Pixel pitch =   7.11  × 1000  = 2.76 µm
2579

G2 pixel pitch

Sensor width = 7.11 mm
Sensor resolution width = 2277 pixels
Pixel pitch =   7.11  × 1000  = 3.12 µm
2277


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

G5 pixel area

Pixel pitch = 2.76 µm

Pixel area = 2.76² = 7.62 µm²

G2 pixel area

Pixel pitch = 3.12 µm

Pixel area = 3.12² = 9.73 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

G5 pixel density

Sensor resolution width = 2579 pixels
Sensor width = 0.711 cm

Pixel density = (2579 / 0.711)² / 1000000 = 13.16 MP/cm²

G2 pixel density

Sensor resolution width = 2277 pixels
Sensor width = 0.711 cm

Pixel density = (2277 / 0.711)² / 1000000 = 10.26 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

G5 sensor resolution

Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 5.00
r = 7.11/5.33 = 1.33
X =  5.00 × 1000000  = 1939
1.33
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939

Sensor resolution = 2579 x 1939

G2 sensor resolution

Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 3.90
r = 7.11/5.33 = 1.33
X =  3.90 × 1000000  = 1712
1.33
Resolution horizontal: X × r = 1712 × 1.33 = 2277
Resolution vertical: X = 1712

Sensor resolution = 2277 x 1712


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


G5 crop factor

Sensor diagonal in mm = 8.89 mm
Crop factor =   43.27  = 4.87
8.89

G2 crop factor

Sensor diagonal in mm = 8.89 mm
Crop factor =   43.27  = 4.87
8.89

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

G5 equivalent aperture

Crop factor = 4.87
Aperture = f2.0 - f3.0

35-mm equivalent aperture = (f2.0 - f3.0) × 4.87 = f9.7 - f14.6

G2 equivalent aperture

Crop factor = 4.87
Aperture = f2.0 - f2.5

35-mm equivalent aperture = (f2.0 - f2.5) × 4.87 = f9.7 - f12.2

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.