Canon PowerShot S110 vs. Nikon Coolpix P330
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon PowerShot S110 | Nikon Coolpix P330 | ||||
check price » | check price » |
Megapixels
12.10
12.20
Max. image resolution
4000 x 3000
4000 x 3000
Sensor
Sensor type
CMOS
CMOS
Sensor size
1/1.7" (~ 7.53 x 5.64 mm)
1/1.7" (~ 7.53 x 5.64 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1 |
(ratio) | ||
Canon PowerShot S110 | Nikon Coolpix P330 |
Surface area:
42.47 mm² | vs | 42.47 mm² |
Difference: 0 mm² (0%)
S110 and P330 sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.04 µm² (1%)
A pixel on Canon S110 sensor is approx. 1% bigger than a pixel on Nikon P330.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon S110
Nikon P330
Total megapixels
13.30
12.76
Effective megapixels
12.10
12.20
Optical zoom
5x
5x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80 - 12800
Auto, 100, 200, 400, 800, 1600, 2000, 3200, 6400, 12800
RAW
Manual focus
Normal focus range
30 cm
30 cm
Macro focus range
3 cm
3 cm
Focal length (35mm equiv.)
24 - 120 mm
24 - 120 mm
Aperture priority
Yes
Yes
Max. aperture
f2.0 - f5.9
f1.8 - f5.6
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±3 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
15 sec
60 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
7
5
Screen size
3"
3"
Screen resolution
461,000 dots
921,000 dots
Video capture
Max. video resolution
1920x1080 (24p)
1920x1080 (60i/50i/30p/25p/24p)
Storage types
SD/SDHC/SDXC
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-5L rechargeable battery
Rechargeable Li-ion Battery EN-EL12
Weight
198 g
200 g
Dimensions
98.8 x 59 x 26.9 mm
103 x 58.3 x 32 mm
Year
2012
2013
Choose cameras to compare
Popular comparisons:
- Canon PowerShot S110 vs. Canon PowerShot S120
- Canon PowerShot S110 vs. Sony Cyber-shot DSC-RX100
- Canon PowerShot S110 vs. Canon PowerShot S100
- Canon PowerShot S110 vs. Canon PowerShot SX240 HS
- Canon PowerShot S110 vs. Nikon Coolpix P330
- Canon PowerShot S110 vs. Panasonic Lumix DMC-LX7
- Canon PowerShot S110 vs. Olympus XZ-2 iHS
- Canon PowerShot S110 vs. Fujifilm XF1
- Canon PowerShot S110 vs. Nokia 808 PureView
- Canon PowerShot S110 vs. Canon PowerShot G15
- Canon PowerShot S110 vs. Panasonic Lumix DMC-LX5
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon S110 diagonal
The diagonal of S110 sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of
that value - 9.41 mm. If you want to know why, see
sensor sizes.
w = 7.53 mm
h = 5.64 mm
w = 7.53 mm
h = 5.64 mm
Diagonal = √ | 7.53² + 5.64² | = 9.41 mm |
Nikon P330 diagonal
The diagonal of P330 sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of
that value - 9.41 mm. If you want to know why, see
sensor sizes.
w = 7.53 mm
h = 5.64 mm
w = 7.53 mm
h = 5.64 mm
Diagonal = √ | 7.53² + 5.64² | = 9.41 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
S110 sensor area
Width = 7.53 mm
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
P330 sensor area
Width = 7.53 mm
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
S110 pixel pitch
Sensor width = 7.53 mm
Sensor resolution width = 4027 pixels
Sensor resolution width = 4027 pixels
Pixel pitch = | 7.53 | × 1000 | = 1.87 µm |
4027 |
P330 pixel pitch
Sensor width = 7.53 mm
Sensor resolution width = 4043 pixels
Sensor resolution width = 4043 pixels
Pixel pitch = | 7.53 | × 1000 | = 1.86 µm |
4043 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
S110 pixel area
Pixel pitch = 1.87 µm
Pixel area = 1.87² = 3.5 µm²
Pixel area = 1.87² = 3.5 µm²
P330 pixel area
Pixel pitch = 1.86 µm
Pixel area = 1.86² = 3.46 µm²
Pixel area = 1.86² = 3.46 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
S110 pixel density
Sensor resolution width = 4027 pixels
Sensor width = 0.753 cm
Pixel density = (4027 / 0.753)² / 1000000 = 28.6 MP/cm²
Sensor width = 0.753 cm
Pixel density = (4027 / 0.753)² / 1000000 = 28.6 MP/cm²
P330 pixel density
Sensor resolution width = 4043 pixels
Sensor width = 0.753 cm
Pixel density = (4043 / 0.753)² / 1000000 = 28.83 MP/cm²
Sensor width = 0.753 cm
Pixel density = (4043 / 0.753)² / 1000000 = 28.83 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
S110 sensor resolution
Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 12.10
Resolution horizontal: X × r = 3005 × 1.34 = 4027
Resolution vertical: X = 3005
Sensor resolution = 4027 x 3005
Sensor height = 5.64 mm
Effective megapixels = 12.10
r = 7.53/5.64 = 1.34 |
|
Resolution vertical: X = 3005
Sensor resolution = 4027 x 3005
P330 sensor resolution
Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 12.20
Resolution horizontal: X × r = 3017 × 1.34 = 4043
Resolution vertical: X = 3017
Sensor resolution = 4043 x 3017
Sensor height = 5.64 mm
Effective megapixels = 12.20
r = 7.53/5.64 = 1.34 |
|
Resolution vertical: X = 3017
Sensor resolution = 4043 x 3017
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
S110 crop factor
Sensor diagonal in mm = 9.41 mm
Crop factor = | 43.27 | = 4.6 |
9.41 |
P330 crop factor
Sensor diagonal in mm = 9.41 mm
Crop factor = | 43.27 | = 4.6 |
9.41 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
S110 equivalent aperture
Crop factor = 4.6
Aperture = f2.0 - f5.9
35-mm equivalent aperture = (f2.0 - f5.9) × 4.6 = f9.2 - f27.1
Aperture = f2.0 - f5.9
35-mm equivalent aperture = (f2.0 - f5.9) × 4.6 = f9.2 - f27.1
P330 equivalent aperture
Crop factor = 4.6
Aperture = f1.8 - f5.6
35-mm equivalent aperture = (f1.8 - f5.6) × 4.6 = f8.3 - f25.8
Aperture = f1.8 - f5.6
35-mm equivalent aperture = (f1.8 - f5.6) × 4.6 = f8.3 - f25.8
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.