Canon PowerShot S80 vs. Canon PowerShot S95
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon PowerShot S80 | Canon PowerShot S95 | ||||
check price » | check price » |
Megapixels
8.00
10.00
Max. image resolution
3264 x 2448
3648 x 2736
Sensor
Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/1.7" (~ 7.53 x 5.64 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.12 |
(ratio) | ||
Canon PowerShot S80 | Canon PowerShot S95 |
Surface area:
37.90 mm² | vs | 42.47 mm² |
Difference: 4.57 mm² (12%)
S95 sensor is approx. 1.12x bigger than S80 sensor.
Note: You are comparing cameras of different generations.
There is a 5 year gap between Canon S80 (2005) and Canon S95 (2010).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.51 µm² (12%)
A pixel on Canon S80 sensor is approx. 12% bigger than a pixel on Canon S95.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon S80
Canon S95
Total megapixels
8.30
10.40
Effective megapixels
8.00
10.00
Optical zoom
3.6x
3.8x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 80 - 3200
RAW
Manual focus
Normal focus range
50 cm
40 cm
Macro focus range
4 cm
5 cm
Focal length (35mm equiv.)
28 - 100 mm
28 - 105 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f5.3
f2.0 - f4.9
Metering
Centre weighted, Evaluative, Spot
Centre weighted, Evaluative, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
15 sec
15 sec
Max. shutter speed
1/2000 sec
1/1600 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
None
White balance presets
7
8
Screen size
2.5"
3"
Screen resolution
115,000 dots
461,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
SDHC, SDXC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Canon Lithium-Ion
Lithium-Ion NB-6L rechargeable battery
Weight
225 g
193 g
Dimensions
104 x 57 x 39 mm
100 x 58 x 30 mm
Year
2005
2010
Choose cameras to compare
Popular comparisons:
- Canon PowerShot S80 vs. Canon PowerShot S90
- Canon PowerShot S80 vs. Canon PowerShot S95
- Canon PowerShot S80 vs. Canon PowerShot S70
- Canon PowerShot S80 vs. Sony Cyber-shot DSC-W200
- Canon PowerShot S80 vs. Fujifilm FinePix E900 Zoom
- Canon PowerShot S80 vs. Canon PowerShot SX270 HS
- Canon PowerShot S80 vs. Canon PowerShot S60
- Canon PowerShot S80 vs. Canon PowerShot A580
- Canon PowerShot S80 vs. Canon PowerShot A640
- Canon PowerShot S80 vs. Canon PowerShot SX50 HS
- Canon PowerShot S80 vs. Olympus XZ-1
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon S80 diagonal
The diagonal of S80 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Canon S95 diagonal
The diagonal of S95 sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of
that value - 9.41 mm. If you want to know why, see
sensor sizes.
w = 7.53 mm
h = 5.64 mm
w = 7.53 mm
h = 5.64 mm
Diagonal = √ | 7.53² + 5.64² | = 9.41 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
S80 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
S95 sensor area
Width = 7.53 mm
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
S80 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 3262 pixels
Sensor resolution width = 3262 pixels
Pixel pitch = | 7.11 | × 1000 | = 2.18 µm |
3262 |
S95 pixel pitch
Sensor width = 7.53 mm
Sensor resolution width = 3661 pixels
Sensor resolution width = 3661 pixels
Pixel pitch = | 7.53 | × 1000 | = 2.06 µm |
3661 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
S80 pixel area
Pixel pitch = 2.18 µm
Pixel area = 2.18² = 4.75 µm²
Pixel area = 2.18² = 4.75 µm²
S95 pixel area
Pixel pitch = 2.06 µm
Pixel area = 2.06² = 4.24 µm²
Pixel area = 2.06² = 4.24 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
S80 pixel density
Sensor resolution width = 3262 pixels
Sensor width = 0.711 cm
Pixel density = (3262 / 0.711)² / 1000000 = 21.05 MP/cm²
Sensor width = 0.711 cm
Pixel density = (3262 / 0.711)² / 1000000 = 21.05 MP/cm²
S95 pixel density
Sensor resolution width = 3661 pixels
Sensor width = 0.753 cm
Pixel density = (3661 / 0.753)² / 1000000 = 23.64 MP/cm²
Sensor width = 0.753 cm
Pixel density = (3661 / 0.753)² / 1000000 = 23.64 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
S80 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 8.00
Resolution horizontal: X × r = 2453 × 1.33 = 3262
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
Sensor height = 5.33 mm
Effective megapixels = 8.00
r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
S95 sensor resolution
Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 10.00
Resolution horizontal: X × r = 2732 × 1.34 = 3661
Resolution vertical: X = 2732
Sensor resolution = 3661 x 2732
Sensor height = 5.64 mm
Effective megapixels = 10.00
r = 7.53/5.64 = 1.34 |
|
Resolution vertical: X = 2732
Sensor resolution = 3661 x 2732
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
S80 crop factor
Sensor diagonal in mm = 8.89 mm
Crop factor = | 43.27 | = 4.87 |
8.89 |
S95 crop factor
Sensor diagonal in mm = 9.41 mm
Crop factor = | 43.27 | = 4.6 |
9.41 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
S80 equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f5.3
35-mm equivalent aperture = (f2.8 - f5.3) × 4.87 = f13.6 - f25.8
Aperture = f2.8 - f5.3
35-mm equivalent aperture = (f2.8 - f5.3) × 4.87 = f13.6 - f25.8
S95 equivalent aperture
Crop factor = 4.6
Aperture = f2.0 - f4.9
35-mm equivalent aperture = (f2.0 - f4.9) × 4.6 = f9.2 - f22.5
Aperture = f2.0 - f4.9
35-mm equivalent aperture = (f2.0 - f4.9) × 4.6 = f9.2 - f22.5
More comparisons of Canon S80:
- Canon PowerShot S80 vs. Canon PowerShot G11
- Canon PowerShot S80 vs. Canon PowerShot A650 IS
- Canon PowerShot S80 vs. Sony Cyber-shot DSC-W300
- Canon PowerShot S80 vs. Olympus PEN E-P1
- Canon PowerShot S80 vs. Sony Cyber-shot DSC-W220
- Canon PowerShot S80 vs. Sony Cyber-shot DSC-W30
- Canon PowerShot S80 vs. Canon PowerShot A620
- Canon PowerShot S80 vs. Canon PowerShot G6
- Canon PowerShot S80 vs. Sony Cyber-shot DSC-HX20V
- Canon PowerShot S80 vs. Canon PowerShot A80
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.