Canon PowerShot SD400 vs. Canon PowerShot SD40
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Canon PowerShot SD400 | Canon PowerShot SD40 | ||||
| check price » | check price » | ||||
Megapixels
5.00
7.10
Max. image resolution
2592 x 1944
3072 x 2304
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| Canon PowerShot SD400 | Canon PowerShot SD40 | |
Surface area:
| 24.84 mm² | vs | 24.84 mm² |
Difference: 0 mm² (0%)
SD400 and SD40 sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.47 µm² (42%)
A pixel on Canon SD400 sensor is approx. 42% bigger than a pixel on Canon SD40.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon SD400
Canon SD40
Total megapixels
5.20
7.10
Effective megapixels
5.00
7.10
Optical zoom
3x
2.4x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 80, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
50 cm
45 cm
Macro focus range
3 cm
10 cm
Focal length (35mm equiv.)
35 - 105 mm
38 - 90 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.9
f3.2 - f5.4
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
15 sec
15 sec
Max. shutter speed
1/1500 sec
1/1600 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
None
White balance presets
5
6
Screen size
2"
1.8"
Screen resolution
118,000 dots
118,000 dots
Video capture
Max. video resolution
Storage types
SD card
SD/MMC card
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-4L battery
Lithium-Ion NB-4L battery
Weight
150 g
120 g
Dimensions
86 x 53 x 21 mm
96 x 45 x 24 mm
Year
2005
2006
Choose cameras to compare
Popular comparisons:
- Canon PowerShot SD400 vs. Canon PowerShot SD600
- Canon PowerShot SD400 vs. Sony Cyber-shot DSC-RX10
- Canon PowerShot SD400 vs. Canon Digital IXUS 50
- Canon PowerShot SD400 vs. Olympus OM-D E-M10
- Canon PowerShot SD400 vs. Samsung S860
- Canon PowerShot SD400 vs. Fujifilm X-T1
- Canon PowerShot SD400 vs. Canon PowerShot A3400 IS
- Canon PowerShot SD400 vs. Canon PowerShot G1 X Mark II
- Canon PowerShot SD400 vs. Canon PowerShot SD40
- Canon PowerShot SD400 vs. Nikon Coolpix P520
- Canon PowerShot SD400 vs. Canon PowerShot SX280 HS
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Canon SD400 diagonal
The diagonal of SD400 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Canon SD40 diagonal
The diagonal of SD40 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
SD400 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
SD40 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
SD400 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.23 µm |
| 2579 |
SD40 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3072 pixels
Sensor resolution width = 3072 pixels
| Pixel pitch = | 5.75 | × 1000 | = 1.87 µm |
| 3072 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
SD400 pixel area
Pixel pitch = 2.23 µm
Pixel area = 2.23² = 4.97 µm²
Pixel area = 2.23² = 4.97 µm²
SD40 pixel area
Pixel pitch = 1.87 µm
Pixel area = 1.87² = 3.5 µm²
Pixel area = 1.87² = 3.5 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
SD400 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
SD40 pixel density
Sensor resolution width = 3072 pixels
Sensor width = 0.575 cm
Pixel density = (3072 / 0.575)² / 1000000 = 28.54 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3072 / 0.575)² / 1000000 = 28.54 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
SD400 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 4.32 mm
Effective megapixels = 5.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
SD40 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.10
Resolution horizontal: X × r = 2310 × 1.33 = 3072
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
Sensor height = 4.32 mm
Effective megapixels = 7.10
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
SD400 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
SD40 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
SD400 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
SD40 equivalent aperture
Crop factor = 6.02
Aperture = f3.2 - f5.4
35-mm equivalent aperture = (f3.2 - f5.4) × 6.02 = f19.3 - f32.5
Aperture = f3.2 - f5.4
35-mm equivalent aperture = (f3.2 - f5.4) × 6.02 = f19.3 - f32.5
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.