Canon PowerShot SD500 vs. Panasonic Lumix DMC-FH4
Comparison
change cameras » | |||||
|
vs |
|
|||
Canon PowerShot SD500 | Panasonic Lumix DMC-FH4 | ||||
check price » | check price » |
Megapixels
7.10
14.10
Max. image resolution
3072 x 2304
4320 x 3240
Sensor
Sensor type
CCD
n/a
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/2.33" (~ 6.08 x 4.56 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.37 | : | 1 |
(ratio) | ||
Canon PowerShot SD500 | Panasonic Lumix DMC-FH4 |
Surface area:
37.90 mm² | vs | 27.72 mm² |
Difference: 10.18 mm² (37%)
SD500 sensor is approx. 1.37x bigger than FH4 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 7 years between Canon SD500 (2005) and Panasonic FH4 (2012).
Seven years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 3.38 µm² (172%)
A pixel on Canon SD500 sensor is approx. 172% bigger than a pixel on Panasonic FH4.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Canon SD500
Panasonic FH4
Total megapixels
7.40
Effective megapixels
7.10
Optical zoom
3x
Digital zoom
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
RAW
Manual focus
Normal focus range
50 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
37 - 111 mm
Aperture priority
No
Max. aperture
f2.8 - f4.9
Metering
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
Shutter priority
No
Min. shutter speed
15 sec
Max. shutter speed
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
None
White balance presets
5
Screen size
2"
Screen resolution
118,000 dots
Video capture
Max. video resolution
Storage types
SD/MMC card
USB
USB 1.0
HDMI
Wireless
GPS
Battery
Lithium-Ion NB-3L battery
Weight
200 g
Dimensions
90 x 57 x 27 mm
Year
2005
2012
Choose cameras to compare
Popular comparisons:
- Canon PowerShot SD500 vs. Canon PowerShot SD600
- Canon PowerShot SD500 vs. Canon PowerShot SD550
- Canon PowerShot SD500 vs. Sony Cyber-shot DSC-S730
- Canon PowerShot SD500 vs. Panasonic Lumix DMC-FH4
- Canon PowerShot SD500 vs. Sony Cyber-shot DSC-P200
- Canon PowerShot SD500 vs. Sony Cyber-shot DSC-W120
- Canon PowerShot SD500 vs. Nikon Coolpix P510
- Canon PowerShot SD500 vs. Nikon Coolpix 4100
- Canon PowerShot SD500 vs. Sony Cyber-shot DSC-S700
- Canon PowerShot SD500 vs. Nikon D60
- Canon PowerShot SD500 vs. Sony Cyber-shot DSC-S650
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Canon SD500 diagonal
The diagonal of SD500 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Panasonic FH4 diagonal
The diagonal of FH4 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
SD500 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
FH4 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
SD500 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 3072 pixels
Sensor resolution width = 3072 pixels
Pixel pitch = | 7.11 | × 1000 | = 2.31 µm |
3072 |
FH4 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 4330 pixels
Sensor resolution width = 4330 pixels
Pixel pitch = | 6.08 | × 1000 | = 1.4 µm |
4330 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
SD500 pixel area
Pixel pitch = 2.31 µm
Pixel area = 2.31² = 5.34 µm²
Pixel area = 2.31² = 5.34 µm²
FH4 pixel area
Pixel pitch = 1.4 µm
Pixel area = 1.4² = 1.96 µm²
Pixel area = 1.4² = 1.96 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
SD500 pixel density
Sensor resolution width = 3072 pixels
Sensor width = 0.711 cm
Pixel density = (3072 / 0.711)² / 1000000 = 18.67 MP/cm²
Sensor width = 0.711 cm
Pixel density = (3072 / 0.711)² / 1000000 = 18.67 MP/cm²
FH4 pixel density
Sensor resolution width = 4330 pixels
Sensor width = 0.608 cm
Pixel density = (4330 / 0.608)² / 1000000 = 50.72 MP/cm²
Sensor width = 0.608 cm
Pixel density = (4330 / 0.608)² / 1000000 = 50.72 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
SD500 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 7.10
Resolution horizontal: X × r = 2310 × 1.33 = 3072
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
Sensor height = 5.33 mm
Effective megapixels = 7.10
r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
FH4 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 14.10
Resolution horizontal: X × r = 3256 × 1.33 = 4330
Resolution vertical: X = 3256
Sensor resolution = 4330 x 3256
Sensor height = 4.56 mm
Effective megapixels = 14.10
r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 3256
Sensor resolution = 4330 x 3256
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
SD500 crop factor
Sensor diagonal in mm = 8.89 mm
Crop factor = | 43.27 | = 4.87 |
8.89 |
FH4 crop factor
Sensor diagonal in mm = 7.60 mm
Crop factor = | 43.27 | = 5.69 |
7.60 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
SD500 equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 4.87 = f13.6 - f23.9
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 4.87 = f13.6 - f23.9
FH4 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Panasonic FH4, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Panasonic FH4 is 5.69
Crop factor for Panasonic FH4 is 5.69
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.