Casio Exilim EX-H50 vs. Fujifilm FinePix F800EXR
Comparison
change cameras » | |||||
|
vs |
|
|||
Casio Exilim EX-H50 | Fujifilm FinePix F800EXR | ||||
check price » | check price » |
Megapixels
16.10
16.00
Max. image resolution
4608 x 3456
4608 x 3456
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2" (~ 6.4 x 4.8 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.08 |
(ratio) | ||
Casio Exilim EX-H50 | Fujifilm FinePix F800EXR |
Surface area:
28.46 mm² | vs | 30.72 mm² |
Difference: 2.26 mm² (8%)
F800EXR sensor is approx. 1.08x bigger than H50 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.16 µm² (9%)
A pixel on Fujifilm F800EXR sensor is approx. 9% bigger than a pixel on Casio H50.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Casio H50
Fujifilm F800EXR
Total megapixels
16.44
Effective megapixels
16.10
16.00
Optical zoom
24x
20x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 64, 100, 200, 400, 800, 1600
Auto, 100, 200, 400, 800, 1600, 3200 (6400 and 12800 with boost)
RAW
Manual focus
Normal focus range
45 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
25 - 600 mm
25 - 500 mm
Aperture priority
No
Yes
Max. aperture
f3 - f6.9
f3.5 - f5.3
Metering
Multi pattern, Center weighted
Multi, Average, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
8 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
7
7
Screen size
3"
3"
Screen resolution
460,800 dots
460,000 dots
Video capture
Max. video resolution
Storage types
SD/SDHC/SDXC, Internal
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Rechargeable lithium ion battery (NP-80)
Lithium-ion NP-50A rechargeable battery
Weight
238 g
232 g
Dimensions
106.9 x 68.6 x 39 mm
105 x 63 x 36 mm
Year
2012
2012
Choose cameras to compare
Popular comparisons:
- Casio Exilim EX-H50 vs. Panasonic Lumix DMC-TZ30
- Casio Exilim EX-H50 vs. Nikon Coolpix L810
- Casio Exilim EX-H50 vs. Casio Exilim EX-ZR100
- Casio Exilim EX-H50 vs. Casio Exilim EX-ZS150
- Casio Exilim EX-H50 vs. Casio Exilim EX-ZR200
- Casio Exilim EX-H50 vs. Canon PowerShot SX160 IS
- Casio Exilim EX-H50 vs. Samsung WB250F
- Casio Exilim EX-H50 vs. Sony Cyber-shot DSC-W350
- Casio Exilim EX-H50 vs. Canon PowerShot SX500 IS
- Casio Exilim EX-H50 vs. Fujifilm FinePix F800EXR
- Casio Exilim EX-H50 vs. BenQ G1
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Casio H50 diagonal
The diagonal of H50 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Fujifilm F800EXR diagonal
The diagonal of F800EXR sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
H50 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
F800EXR sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
H50 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4627 pixels
Sensor resolution width = 4627 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.33 µm |
4627 |
F800EXR pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 4612 pixels
Sensor resolution width = 4612 pixels
Pixel pitch = | 6.40 | × 1000 | = 1.39 µm |
4612 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
H50 pixel area
Pixel pitch = 1.33 µm
Pixel area = 1.33² = 1.77 µm²
Pixel area = 1.33² = 1.77 µm²
F800EXR pixel area
Pixel pitch = 1.39 µm
Pixel area = 1.39² = 1.93 µm²
Pixel area = 1.39² = 1.93 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
H50 pixel density
Sensor resolution width = 4627 pixels
Sensor width = 0.616 cm
Pixel density = (4627 / 0.616)² / 1000000 = 56.42 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4627 / 0.616)² / 1000000 = 56.42 MP/cm²
F800EXR pixel density
Sensor resolution width = 4612 pixels
Sensor width = 0.64 cm
Pixel density = (4612 / 0.64)² / 1000000 = 51.93 MP/cm²
Sensor width = 0.64 cm
Pixel density = (4612 / 0.64)² / 1000000 = 51.93 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
H50 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.10
Resolution horizontal: X × r = 3479 × 1.33 = 4627
Resolution vertical: X = 3479
Sensor resolution = 4627 x 3479
Sensor height = 4.62 mm
Effective megapixels = 16.10
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3479
Sensor resolution = 4627 x 3479
F800EXR sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 16.00
Resolution horizontal: X × r = 3468 × 1.33 = 4612
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Sensor height = 4.80 mm
Effective megapixels = 16.00
r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
H50 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
F800EXR crop factor
Sensor diagonal in mm = 8.00 mm
Crop factor = | 43.27 | = 5.41 |
8.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
H50 equivalent aperture
Crop factor = 5.62
Aperture = f3 - f6.9
35-mm equivalent aperture = (f3 - f6.9) × 5.62 = f16.9 - f38.8
Aperture = f3 - f6.9
35-mm equivalent aperture = (f3 - f6.9) × 5.62 = f16.9 - f38.8
F800EXR equivalent aperture
Crop factor = 5.41
Aperture = f3.5 - f5.3
35-mm equivalent aperture = (f3.5 - f5.3) × 5.41 = f18.9 - f28.7
Aperture = f3.5 - f5.3
35-mm equivalent aperture = (f3.5 - f5.3) × 5.41 = f18.9 - f28.7
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.