Casio Exilim EX-S600D vs. Samsung NX30

Comparison

change cameras »

Casio Exilim EX-S600D

Samsung NX30

check price »

Megapixels

6.00

20.30

Max. image resolution

2816 x 2112

5472 x 3648

Sensor

Sensor type

CCD

CMOS

Sensor size

1/2.5" (~ 5.75 x 4.32 mm)

23.5 x 15.7 mm

Sensor resolution

2825 x 2124

5519 x 3679

Diagonal

7.19 mm

28.26 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	14.85
(ratio)

Casio Exilim EX-S600D		Samsung NX30

Surface area:

24.84 mm²

368.95 mm²

Difference: 344.11 mm² (1385%)

NX30 sensor is approx. 14.85x bigger than S600D sensor.

Note: You are comparing sensors of very different generations. There is a gap of 8 years between Casio S600D (2006) and Samsung NX30 (2014). Eight years is a lot of time in terms of technology, meaning newer sensors are overall much more efficient than the older ones.

Pixel pitch

2.04 µm

4.26 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 2.22 µm (109%)

Pixel pitch of NX30 is approx. 109% higher than pixel pitch of S600D.

Pixel area

4.16 µm²

18.15 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 13.99 µm² (336%)

A pixel on Samsung NX30 sensor is approx. 336% bigger than a pixel on Casio S600D.

Pixel density

24.14 MP/cm²

5.52 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 18.62 µm (337%)

Casio S600D has approx. 337% higher pixel density than Samsung NX30.

To learn about the accuracy of these numbers, click here.

Specs

Casio S600D

Samsung NX30

Crop factor

6.02

1.53

Total megapixels

6.20

Effective megapixels

6.00

20.30

Optical zoom

Digital zoom

Yes

ISO sensitivity

Auto, 50, 100, 200, 400

Auto, 100, 200, 400, 800, 1600, 3200, 6400, 12800, 25600

RAW

Manual focus

Normal focus range

40 cm

Macro focus range

15 cm

Focal length (35mm equiv.)

38 - 114 mm

Aperture priority

Yes

Max. aperture

f2.7 - f4.3

Max. aperture (35mm equiv.)

f16.3 - f25.9

n/a

Metering

Centre weighted, Multi-pattern, Spot

Multi, Center-weighted, Spot

Exposure compensation

±2 EV (in 1/3 EV steps)

±3 EV (in 1/3 EV steps)

Shutter priority

Yes

Min. shutter speed

1/8 sec

30 sec

Max. shutter speed

1/2000 sec

1/8000 sec

Built-in flash

External flash

Viewfinder

None

Electronic

White balance presets

Screen size

2.2"

Screen resolution

84,960 dots

1,036,000 dots

Video capture

Max. video resolution

1920x1080 (60p/30p)

Storage types

Secure Digital

SD/SDHC/SDXC

USB

USB 1.0

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

Lithium-Ion rechargeable

BP1410 (1410mAh)

Weight

115 g

375 g

Dimensions

90 x 59 x 16.1 mm

127 x 95.5 x 41.7 mm

Year

2006

2014

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Casio S600D diagonal

The diagonal of S600D sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of that value - 7.19 mm. If you want to know why, see sensor sizes.

w = 5.75 mm
h = 4.32 mm

Diagonal = √

5.75² + 4.32²

= 7.19 mm

Samsung NX30 diagonal

w = 23.50 mm
h = 15.70 mm

Diagonal = √

23.50² + 15.70²

= 28.26 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

S600D sensor area

Width = 5.75 mm
Height = 4.32 mm

Surface area = 5.75 × 4.32 = 24.84 mm²

NX30 sensor area

Width = 23.50 mm
Height = 15.70 mm

Surface area = 23.50 × 15.70 = 368.95 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

S600D pixel pitch

Sensor width = 5.75 mm
Sensor resolution width = 2825 pixels

Pixel pitch =	5.75	× 1000	= 2.04 µm
	2825

NX30 pixel pitch

Sensor width = 23.50 mm
Sensor resolution width = 5519 pixels

Pixel pitch =	23.50	× 1000	= 4.26 µm
	5519

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

S600D pixel area

Pixel pitch = 2.04 µm

Pixel area = 2.04² = 4.16 µm²

NX30 pixel area

Pixel pitch = 4.26 µm

Pixel area = 4.26² = 18.15 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

S600D pixel density

Sensor resolution width = 2825 pixels
Sensor width = 0.575 cm

Pixel density = (2825 / 0.575)² / 1000000 = 24.14 MP/cm²

NX30 pixel density

Sensor resolution width = 5519 pixels
Sensor width = 2.35 cm

Pixel density = (5519 / 2.35)² / 1000000 = 5.52 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

S600D sensor resolution

Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 6.00

r = 5.75/4.32 = 1.33

X = √	6.00 × 1000000	= 2124
	1.33

Resolution horizontal: X × r = 2124 × 1.33 = 2825
Resolution vertical: X = 2124

Sensor resolution = 2825 x 2124

NX30 sensor resolution

Sensor width = 23.50 mm
Sensor height = 15.70 mm
Effective megapixels = 20.30

r = 23.50/15.70 = 1.5

X = √	20.30 × 1000000	= 3679
	1.5

Resolution horizontal: X × r = 3679 × 1.5 = 5519
Resolution vertical: X = 3679

Sensor resolution = 5519 x 3679

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

S600D crop factor

Sensor diagonal in mm = 7.19 mm

Crop factor =	43.27	= 6.02
	7.19

NX30 crop factor

Sensor diagonal in mm = 28.26 mm

Crop factor =	43.27	= 1.53
	28.26

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

S600D equivalent aperture

Crop factor = 6.02
Aperture = f2.7 - f4.3

35-mm equivalent aperture = (f2.7 - f4.3) × 6.02 = f16.3 - f25.9

NX30 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Samsung NX30, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Samsung NX30 is 1.53

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.