Casio Exilim EX-Z250 vs. Casio Exilim EX-Z25
Comparison
change cameras » | |||||
|
vs |
|
|||
Casio Exilim EX-Z250 | Casio Exilim EX-Z25 | ||||
check price » | check price » |
Megapixels
9.10
12.10
Max. image resolution
3456 x 2592
4000 x 3000
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.15 |
(ratio) | ||
Casio Exilim EX-Z250 | Casio Exilim EX-Z25 |
Surface area:
24.84 mm² | vs | 28.46 mm² |
Difference: 3.62 mm² (15%)
Z25 sensor is approx. 1.15x bigger than Z250 sensor.
Note: You are comparing cameras of different generations.
There is a 2 year gap between Casio Z250 (2008) and Casio Z25 (2010).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.35 µm² (15%)
A pixel on Casio Z250 sensor is approx. 15% bigger than a pixel on Casio Z25.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Casio Z250
Casio Z25
Total megapixels
9.30
Effective megapixels
9.10
Optical zoom
4x
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 64, 100, 200, 400, 800, 1600, 3200
Auto, 64, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
40 cm
10 cm
Macro focus range
10 cm
10 cm
Focal length (35mm equiv.)
28 - 112 mm
35 - 105 mm
Aperture priority
No
No
Max. aperture
f2.6 - f5.9
f3.1 - f5.9
Metering
Centre weighted, Multi-pattern, Spot
Centre weighted, Multi-segment, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
4 sec
4 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
7
7
Screen size
3"
2.7"
Screen resolution
230,400 dots
230,160 dots
Video capture
Max. video resolution
Storage types
MultiMedia, SDHC, Secure Digital
SDHC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable
Li-Ion
Weight
119 g
102 g
Dimensions
96.7 x 57.3 x 19.9 mm
89.7 x 51.7 x 19.4 mm
Year
2008
2010
Choose cameras to compare
Popular comparisons:
- Casio Exilim EX-Z250 vs. Fujifilm FinePix J10
- Casio Exilim EX-Z250 vs. Casio Exilim EX-Z25
- Casio Exilim EX-Z250 vs. Sony Cyber-shot DSC-W50
- Casio Exilim EX-Z250 vs. Samsung ST50
- Casio Exilim EX-Z250 vs. Panasonic Lumix DMC-LF1
- Casio Exilim EX-Z250 vs. Canon Digital IXUS 90 IS
- Casio Exilim EX-Z250 vs. Canon Digital IXUS 80 IS
- Casio Exilim EX-Z250 vs. Nikon Coolpix S2500
- Casio Exilim EX-Z250 vs. Panasonic Lumix DMC-TZ3
- Casio Exilim EX-Z250 vs. Ricoh R50
- Casio Exilim EX-Z250 vs. Casio Exilim EX-Z330
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Casio Z250 diagonal
The diagonal of Z250 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Casio Z25 diagonal
The diagonal of Z25 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Z250 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Z25 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
Z250 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3479 pixels
Sensor resolution width = 3479 pixels
Pixel pitch = | 5.75 | × 1000 | = 1.65 µm |
3479 |
Z25 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4011 pixels
Sensor resolution width = 4011 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.54 µm |
4011 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
Z250 pixel area
Pixel pitch = 1.65 µm
Pixel area = 1.65² = 2.72 µm²
Pixel area = 1.65² = 2.72 µm²
Z25 pixel area
Pixel pitch = 1.54 µm
Pixel area = 1.54² = 2.37 µm²
Pixel area = 1.54² = 2.37 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
Z250 pixel density
Sensor resolution width = 3479 pixels
Sensor width = 0.575 cm
Pixel density = (3479 / 0.575)² / 1000000 = 36.61 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3479 / 0.575)² / 1000000 = 36.61 MP/cm²
Z25 pixel density
Sensor resolution width = 4011 pixels
Sensor width = 0.616 cm
Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Z250 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 9.10
Resolution horizontal: X × r = 2616 × 1.33 = 3479
Resolution vertical: X = 2616
Sensor resolution = 3479 x 2616
Sensor height = 4.32 mm
Effective megapixels = 9.10
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2616
Sensor resolution = 3479 x 2616
Z25 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.10
Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Sensor height = 4.62 mm
Effective megapixels = 12.10
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
Z250 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
Z25 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Z250 equivalent aperture
Crop factor = 6.02
Aperture = f2.6 - f5.9
35-mm equivalent aperture = (f2.6 - f5.9) × 6.02 = f15.7 - f35.5
Aperture = f2.6 - f5.9
35-mm equivalent aperture = (f2.6 - f5.9) × 6.02 = f15.7 - f35.5
Z25 equivalent aperture
Crop factor = 5.62
Aperture = f3.1 - f5.9
35-mm equivalent aperture = (f3.1 - f5.9) × 5.62 = f17.4 - f33.2
Aperture = f3.1 - f5.9
35-mm equivalent aperture = (f3.1 - f5.9) × 5.62 = f17.4 - f33.2
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.