Concord 5340z vs. AgfaPhoto DC-1338sT
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Concord 5340z | AgfaPhoto DC-1338sT | ||||
| check price » | check price » | ||||
Megapixels
5.14
10.00
Max. image resolution
3264 x 2448
3648 x 2736
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/1.8" (~ 7.11 x 5.33 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.53 |
| (ratio) | ||
| Concord 5340z | AgfaPhoto DC-1338sT | |
Surface area:
| 24.84 mm² | vs | 37.90 mm² |
Difference: 13.06 mm² (53%)
DC-1338sT sensor is approx. 1.53x bigger than 5340z sensor.
Note: You are comparing cameras of different generations.
There is a 4 year gap between Concord 5340z (2004) and AgfaPhoto DC-1338sT (2008).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.04 µm² (27%)
A pixel on Concord 5340z sensor is approx. 27% bigger than a pixel on AgfaPhoto DC-1338sT.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Concord 5340z
AgfaPhoto DC-1338sT
Total megapixels
Effective megapixels
Optical zoom
Yes
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto
Auto, 50, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
50 cm
40 cm
Macro focus range
10 cm
10 cm
Focal length (35mm equiv.)
35 - 103 mm
35 - 106 mm
Aperture priority
No
No
Max. aperture
f2.9 - f5
f3.1 - f5.6
Metering
Centre weighted, Matrix, Multi Spot
Centre weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
8 sec
1 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical
None
White balance presets
5
6
Screen size
2"
3"
Screen resolution
110,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
SDHC, Secure Digital
USB
USB 1.1
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
2x AA
Li-Ion
Weight
160 g
130 g
Dimensions
92 x 31.5 x 61.5 mm
95.4 x 56.4 x 18.9 mm
Year
2004
2008
Choose cameras to compare
Popular comparisons:
- Concord 5340z vs. Concord 5345z
- Concord 5340z vs. AgfaPhoto DC-1338sT
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 1200D
- Canon EOS 200D vs. Canon EOS 700D
- Canon EOS 1300D vs. Canon EOS 750D
- Canon EOS 4000D vs. Canon EOS 1300D
- Panasonic Lumix DC-TZ90 vs. Panasonic Lumix DMC-TZ80
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Concord 5340z diagonal
The diagonal of 5340z sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
AgfaPhoto DC-1338sT diagonal
The diagonal of DC-1338sT sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
5340z sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
DC-1338sT sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
5340z pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2615 pixels
Sensor resolution width = 2615 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.2 µm |
| 2615 |
DC-1338sT pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 3647 pixels
Sensor resolution width = 3647 pixels
| Pixel pitch = | 7.11 | × 1000 | = 1.95 µm |
| 3647 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
5340z pixel area
Pixel pitch = 2.2 µm
Pixel area = 2.2² = 4.84 µm²
Pixel area = 2.2² = 4.84 µm²
DC-1338sT pixel area
Pixel pitch = 1.95 µm
Pixel area = 1.95² = 3.8 µm²
Pixel area = 1.95² = 3.8 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
5340z pixel density
Sensor resolution width = 2615 pixels
Sensor width = 0.575 cm
Pixel density = (2615 / 0.575)² / 1000000 = 20.68 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2615 / 0.575)² / 1000000 = 20.68 MP/cm²
DC-1338sT pixel density
Sensor resolution width = 3647 pixels
Sensor width = 0.711 cm
Pixel density = (3647 / 0.711)² / 1000000 = 26.31 MP/cm²
Sensor width = 0.711 cm
Pixel density = (3647 / 0.711)² / 1000000 = 26.31 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
5340z sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.14
Resolution horizontal: X × r = 1966 × 1.33 = 2615
Resolution vertical: X = 1966
Sensor resolution = 2615 x 1966
Sensor height = 4.32 mm
Effective megapixels = 5.14
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1966
Sensor resolution = 2615 x 1966
DC-1338sT sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 10.00
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Sensor height = 5.33 mm
Effective megapixels = 10.00
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
5340z crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
DC-1338sT crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
5340z equivalent aperture
Crop factor = 6.02
Aperture = f2.9 - f5
35-mm equivalent aperture = (f2.9 - f5) × 6.02 = f17.5 - f30.1
Aperture = f2.9 - f5
35-mm equivalent aperture = (f2.9 - f5) × 6.02 = f17.5 - f30.1
DC-1338sT equivalent aperture
Crop factor = 4.87
Aperture = f3.1 - f5.6
35-mm equivalent aperture = (f3.1 - f5.6) × 4.87 = f15.1 - f27.3
Aperture = f3.1 - f5.6
35-mm equivalent aperture = (f3.1 - f5.6) × 4.87 = f15.1 - f27.3
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.