Concord Eye-Q 5330z vs. Concord Eye-Q Duo 2000
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Concord Eye-Q 5330z | Concord Eye-Q Duo 2000 | ||||
| check price » | check price » | ||||
Megapixels
5.24
2.00
Max. image resolution
2560 x 1920
1600 x 1200
Sensor
Sensor type
CCD
CMOS
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/1.8" (~ 7.11 x 5.33 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| Concord Eye-Q 5330z | Concord Eye-Q Duo 2000 | |
Surface area:
| 37.90 mm² | vs | 37.90 mm² |
Difference: 0 mm² (0%)
Eye-Q 5330z and Eye-Q Duo 2000 sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 11.77 µm² (163%)
A pixel on Concord Eye-Q Duo 2000 sensor is approx. 163% bigger than a pixel on Concord Eye-Q 5330z.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Concord Eye-Q 5330z
Concord Eye-Q Duo 2000
Total megapixels
Effective megapixels
Optical zoom
Yes
No
Digital zoom
Yes
Yes
ISO sensitivity
100, 200, 400
Auto
RAW
Manual focus
Normal focus range
40 cm
120 cm
Macro focus range
8 cm
Focal length (35mm equiv.)
38 - 114 mm
48 mm
Aperture priority
No
No
Max. aperture
3.4 - f3.6
f3.2
Metering
Centre weighted
Centre weighted
Exposure compensation
±2 EV (in 1/2 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Min. shutter speed
2 sec
Max. shutter speed
1/500 sec
Built-in flash
External flash
Viewfinder
Optical
Optical
White balance presets
4
3
Screen size
1.8"
1.6"
Screen resolution
Video capture
Max. video resolution
Storage types
CompactFlash type I
Secure Digital
USB
USB 1.1
USB 1.1
HDMI
Wireless
GPS
Battery
4x AA
2x AA
Weight
280 g
156 g
Dimensions
116 x 73 x 62 mm
110 x 62 x 36 mm
Year
2003
2002
Choose cameras to compare
Popular comparisons:
- Concord Eye-Q 5330z vs. Concord Eye-Q Duo 2000
- Concord Eye-Q 5330z vs. Minolta DiMAGE A1
- Concord Eye-Q 5330z vs. Kyocera Finecam S3
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 1200D
- Canon EOS 200D vs. Canon EOS 700D
- Canon EOS 1300D vs. Canon EOS 750D
- Canon EOS 4000D vs. Canon EOS 1300D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Concord Eye-Q 5330z diagonal
The diagonal of Eye-Q 5330z sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Concord Eye-Q Duo 2000 diagonal
The diagonal of Eye-Q Duo 2000 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Eye-Q 5330z sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Eye-Q Duo 2000 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
Eye-Q 5330z pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2640 pixels
Sensor resolution width = 2640 pixels
| Pixel pitch = | 7.11 | × 1000 | = 2.69 µm |
| 2640 |
Eye-Q Duo 2000 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 1631 pixels
Sensor resolution width = 1631 pixels
| Pixel pitch = | 7.11 | × 1000 | = 4.36 µm |
| 1631 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
Eye-Q 5330z pixel area
Pixel pitch = 2.69 µm
Pixel area = 2.69² = 7.24 µm²
Pixel area = 2.69² = 7.24 µm²
Eye-Q Duo 2000 pixel area
Pixel pitch = 4.36 µm
Pixel area = 4.36² = 19.01 µm²
Pixel area = 4.36² = 19.01 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
Eye-Q 5330z pixel density
Sensor resolution width = 2640 pixels
Sensor width = 0.711 cm
Pixel density = (2640 / 0.711)² / 1000000 = 13.79 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2640 / 0.711)² / 1000000 = 13.79 MP/cm²
Eye-Q Duo 2000 pixel density
Sensor resolution width = 1631 pixels
Sensor width = 0.711 cm
Pixel density = (1631 / 0.711)² / 1000000 = 5.26 MP/cm²
Sensor width = 0.711 cm
Pixel density = (1631 / 0.711)² / 1000000 = 5.26 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Eye-Q 5330z sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 5.24
Resolution horizontal: X × r = 1985 × 1.33 = 2640
Resolution vertical: X = 1985
Sensor resolution = 2640 x 1985
Sensor height = 5.33 mm
Effective megapixels = 5.24
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1985
Sensor resolution = 2640 x 1985
Eye-Q Duo 2000 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 2.00
Resolution horizontal: X × r = 1226 × 1.33 = 1631
Resolution vertical: X = 1226
Sensor resolution = 1631 x 1226
Sensor height = 5.33 mm
Effective megapixels = 2.00
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1226
Sensor resolution = 1631 x 1226
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
Eye-Q 5330z crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
Eye-Q Duo 2000 crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Eye-Q 5330z equivalent aperture
Crop factor = 4.87
Aperture = 3.4 - f3.6
35-mm equivalent aperture = (3.4 - f3.6) × 4.87 = f16.6 - f17.5
Aperture = 3.4 - f3.6
35-mm equivalent aperture = (3.4 - f3.6) × 4.87 = f16.6 - f17.5
Eye-Q Duo 2000 equivalent aperture
Crop factor = 4.87
Aperture = f3.2
35-mm equivalent aperture = (f3.2) × 4.87 = f15.6
Aperture = f3.2
35-mm equivalent aperture = (f3.2) × 4.87 = f15.6
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.