Concord Eye-Q Duo LCD vs. Kodak EasyShare C610
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Concord Eye-Q Duo LCD | Kodak EasyShare C610 | ||||
| check price » | check price » | ||||
Megapixels
1.30
6.10
Max. image resolution
1280 x 960
2848 x 2136
Sensor
Sensor type
CMOS
CCD
Sensor size
1/2" (~ 6.4 x 4.8 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.24 | : | 1 |
| (ratio) | ||
| Concord Eye-Q Duo LCD | Kodak EasyShare C610 | |
Surface area:
| 30.72 mm² | vs | 24.84 mm² |
Difference: 5.88 mm² (24%)
Eye-Q Duo LCD sensor is approx. 1.24x bigger than C610 sensor.
Note: You are comparing cameras of different generations.
There is a 5 year gap between Concord Eye-Q Duo LCD (2002) and Kodak C610 (2007).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 19.64 µm² (481%)
A pixel on Concord Eye-Q Duo LCD sensor is approx. 481% bigger than a pixel on Kodak C610.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Concord Eye-Q Duo LCD
Kodak C610
Total megapixels
Effective megapixels
Optical zoom
No
No
Digital zoom
Yes
Yes
ISO sensitivity
100
Auto, 80, 100, 200, 400, 800
RAW
Manual focus
Normal focus range
120 cm
100 cm
Macro focus range
Focal length (35mm equiv.)
48 mm
38 mm
Aperture priority
No
No
Max. aperture
f3.2
f4.5
Metering
Centre weighted
Centre weighted, Multi-pattern, Spot
Exposure compensation
±1.5 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1/15 sec
1/2 sec
Max. shutter speed
1/1000 sec
1/1500 sec
Built-in flash
External flash
Viewfinder
Optical
None
White balance presets
6
Screen size
1.6"
2.4"
Screen resolution
76,800 dots
150,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia
SDHC, Secure Digital
USB
USB 1.1
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
2x AA
2x AA
Weight
116 g
80 g
Dimensions
110 x 62 x 35.9 mm
82 x 52 x 23.5 mm
Year
2002
2007
Choose cameras to compare
Popular comparisons:
- Concord Eye-Q Duo LCD vs. Fujifilm FinePix A120
- Concord Eye-Q Duo LCD vs. Concord Eye-Q 1300
- Concord Eye-Q Duo LCD vs. Concord Eye-Q Go 2000
- Concord Eye-Q Duo LCD vs. Kodak EasyShare C610
- Concord Eye-Q Duo LCD vs. Sanyo Xacti VPC S4 EX
- Concord Eye-Q Duo LCD vs. Casio Exilim EX-S1
- Concord Eye-Q Duo LCD vs. Panasonic Lumix DMC-LC20
- Concord Eye-Q Duo LCD vs. Fujifilm FinePix S1600
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Concord Eye-Q Duo LCD diagonal
The diagonal of Eye-Q Duo LCD sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Kodak C610 diagonal
The diagonal of C610 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Eye-Q Duo LCD sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
C610 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
Eye-Q Duo LCD pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1315 pixels
Sensor resolution width = 1315 pixels
| Pixel pitch = | 6.40 | × 1000 | = 4.87 µm |
| 1315 |
C610 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2849 pixels
Sensor resolution width = 2849 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.02 µm |
| 2849 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
Eye-Q Duo LCD pixel area
Pixel pitch = 4.87 µm
Pixel area = 4.87² = 23.72 µm²
Pixel area = 4.87² = 23.72 µm²
C610 pixel area
Pixel pitch = 2.02 µm
Pixel area = 2.02² = 4.08 µm²
Pixel area = 2.02² = 4.08 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
Eye-Q Duo LCD pixel density
Sensor resolution width = 1315 pixels
Sensor width = 0.64 cm
Pixel density = (1315 / 0.64)² / 1000000 = 4.22 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1315 / 0.64)² / 1000000 = 4.22 MP/cm²
C610 pixel density
Sensor resolution width = 2849 pixels
Sensor width = 0.575 cm
Pixel density = (2849 / 0.575)² / 1000000 = 24.55 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2849 / 0.575)² / 1000000 = 24.55 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Eye-Q Duo LCD sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 1.30
Resolution horizontal: X × r = 989 × 1.33 = 1315
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
Sensor height = 4.80 mm
Effective megapixels = 1.30
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
C610 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 6.10
Resolution horizontal: X × r = 2142 × 1.33 = 2849
Resolution vertical: X = 2142
Sensor resolution = 2849 x 2142
Sensor height = 4.32 mm
Effective megapixels = 6.10
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2142
Sensor resolution = 2849 x 2142
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
Eye-Q Duo LCD crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
C610 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Eye-Q Duo LCD equivalent aperture
Crop factor = 5.41
Aperture = f3.2
35-mm equivalent aperture = (f3.2) × 5.41 = f17.3
Aperture = f3.2
35-mm equivalent aperture = (f3.2) × 5.41 = f17.3
C610 equivalent aperture
Crop factor = 6.02
Aperture = f4.5
35-mm equivalent aperture = (f4.5) × 6.02 = f27.1
Aperture = f4.5
35-mm equivalent aperture = (f4.5) × 6.02 = f27.1
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.