Contax i4R vs. Leica X-U (Typ 113)
Comparison
change cameras » | |||||
|
vs |
|
|||
Contax i4R | Leica X-U (Typ 113) | ||||
check price » | check price » |
Megapixels
4.00
16.20
Max. image resolution
2272 x 1704
4928 x 3264
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.7" (~ 5.33 x 4 mm)
23.6 x 15.7 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 17.38 |
(ratio) | ||
Contax i4R | Leica X-U (Typ 113) |
Surface area:
21.32 mm² | vs | 370.52 mm² |
Difference: 349.2 mm² (1638%)
X-U (Typ 113) sensor is approx. 17.38x bigger than i4R sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 12 years between Contax i4R (2004) and
Leica X-U (Typ 113) (2016).
Twelve years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 17.6 µm² (330%)
A pixel on Leica X-U (Typ 113) sensor is approx. 330% bigger than a pixel on Contax i4R.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Contax i4R
Leica X-U (Typ 113)
Total megapixels
16.50
Effective megapixels
16.20
Optical zoom
No
1x
Digital zoom
Yes
No
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 100-12500
RAW
Manual focus
Normal focus range
60 cm
20 cm
Macro focus range
5 cm
Focal length (35mm equiv.)
39 mm
35 mm
Aperture priority
No
Yes
Max. aperture
f2.8
f1.7
Metering
Centre weighted, Multi-segment, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
1 sec
30 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
4
5
Screen size
1.5"
3"
Screen resolution
130,000 dots
920,000 dots
Video capture
Max. video resolution
1920x1080 (30p)
Storage types
MultiMedia, Secure Digital
SD/SDHC/SDXC
USB
USB 1.1
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
BP-DC8 lithium-ion battery
Weight
90 g
635 g
Dimensions
94 x 39 x 21 mm
140 x 79 x 88 mm
Year
2004
2016
Choose cameras to compare
Popular comparisons:
- Contax i4R vs. Contax TVS Digital
- Contax i4R vs. Sony Cyber-shot DSC-RX100
- Contax i4R vs. Contax SL300R T
- Contax i4R vs. Fujifilm X-E1
- Contax i4R vs. Ricoh GXR Mount A12
- Contax i4R vs. Nikon D800
- Contax i4R vs. Leica D-LUX 3
- Contax i4R vs. Contax N Digital
- Contax i4R vs. Panasonic Lumix DMC-LC1
- Contax i4R vs. Panasonic Lumix DMC-LC5
- Contax i4R vs. Sigma DP2
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Contax i4R diagonal
The diagonal of i4R sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Leica X-U (Typ 113) diagonal
w = 23.60 mm
h = 15.70 mm
h = 15.70 mm
Diagonal = √ | 23.60² + 15.70² | = 28.35 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
i4R sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
X-U (Typ 113) sensor area
Width = 23.60 mm
Height = 15.70 mm
Surface area = 23.60 × 15.70 = 370.52 mm²
Height = 15.70 mm
Surface area = 23.60 × 15.70 = 370.52 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
i4R pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 2306 pixels
Sensor resolution width = 2306 pixels
Pixel pitch = | 5.33 | × 1000 | = 2.31 µm |
2306 |
X-U (Typ 113) pixel pitch
Sensor width = 23.60 mm
Sensor resolution width = 4929 pixels
Sensor resolution width = 4929 pixels
Pixel pitch = | 23.60 | × 1000 | = 4.79 µm |
4929 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
i4R pixel area
Pixel pitch = 2.31 µm
Pixel area = 2.31² = 5.34 µm²
Pixel area = 2.31² = 5.34 µm²
X-U (Typ 113) pixel area
Pixel pitch = 4.79 µm
Pixel area = 4.79² = 22.94 µm²
Pixel area = 4.79² = 22.94 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
i4R pixel density
Sensor resolution width = 2306 pixels
Sensor width = 0.533 cm
Pixel density = (2306 / 0.533)² / 1000000 = 18.72 MP/cm²
Sensor width = 0.533 cm
Pixel density = (2306 / 0.533)² / 1000000 = 18.72 MP/cm²
X-U (Typ 113) pixel density
Sensor resolution width = 4929 pixels
Sensor width = 2.36 cm
Pixel density = (4929 / 2.36)² / 1000000 = 4.36 MP/cm²
Sensor width = 2.36 cm
Pixel density = (4929 / 2.36)² / 1000000 = 4.36 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
i4R sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 4.00
Resolution horizontal: X × r = 1734 × 1.33 = 2306
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
Sensor height = 4.00 mm
Effective megapixels = 4.00
r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 1734
Sensor resolution = 2306 x 1734
X-U (Typ 113) sensor resolution
Sensor width = 23.60 mm
Sensor height = 15.70 mm
Effective megapixels = 16.20
Resolution horizontal: X × r = 3286 × 1.5 = 4929
Resolution vertical: X = 3286
Sensor resolution = 4929 x 3286
Sensor height = 15.70 mm
Effective megapixels = 16.20
r = 23.60/15.70 = 1.5 |
|
Resolution vertical: X = 3286
Sensor resolution = 4929 x 3286
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
i4R crop factor
Sensor diagonal in mm = 6.66 mm
Crop factor = | 43.27 | = 6.5 |
6.66 |
X-U (Typ 113) crop factor
Sensor diagonal in mm = 28.35 mm
Crop factor = | 43.27 | = 1.53 |
28.35 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
i4R equivalent aperture
Crop factor = 6.5
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 6.5 = f18.2
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 6.5 = f18.2
X-U (Typ 113) equivalent aperture
Crop factor = 1.53
Aperture = f1.7
35-mm equivalent aperture = (f1.7) × 1.53 = f2.6
Aperture = f1.7
35-mm equivalent aperture = (f1.7) × 1.53 = f2.6
More comparisons of Contax i4R:
- Contax i4R vs. Nikon Coolpix S01
- Contax i4R vs. Nokia 808 PureView
- Contax i4R vs. Contax U4R
- Contax i4R vs. Panasonic Lumix DMC-LX5
- Contax i4R vs. Pentax *ist DS
- Contax i4R vs. Canon EOS 350D
- Contax i4R vs. Leica X-U (Typ 113)
- Contax i4R vs. Panasonic Lumix DMC-LX100
- Contax i4R vs. Panasonic Lumix DMC-L1
- Contax i4R vs. Sony Cyber-shot DSC-WX50
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.