Epson PhotoPC L-400 vs. Nikon Coolpix 5600
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Epson PhotoPC L-400 | Nikon Coolpix 5600 | ||||
| check price » | check price » | ||||
Megapixels
4.10
5.00
Max. image resolution
2304 x 1728
2592 x 1944
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| Epson PhotoPC L-400 | Nikon Coolpix 5600 | |
Surface area:
| 24.84 mm² | vs | 24.84 mm² |
Difference: 0 mm² (0%)
L-400 and 5600 sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 2 year gap between Epson L-400 (2003) and Nikon 5600 (2005).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.08 µm² (22%)
A pixel on Epson L-400 sensor is approx. 22% bigger than a pixel on Nikon 5600.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Epson L-400
Nikon 5600
Total megapixels
5.20
Effective megapixels
5.00
Optical zoom
3x
3x
Digital zoom
Yes
Yes
ISO sensitivity
100-400 (Auto)
Auto
RAW
Manual focus
Normal focus range
50 cm
30 cm
Macro focus range
11 cm
4 cm
Focal length (35mm equiv.)
34 - 102 mm
34 - 102 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.9
f2.9 - f4.9
Metering
Centre weighted
Multi, Center-weighted, Average
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1/2 sec
4 sec
Max. shutter speed
1/2000 sec
1/3000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
4
6
Screen size
1.5"
1.8"
Screen resolution
72,000 dots
80,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
Secure Digital
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
AA (2) batteries (NiMH recommended)
Weight
185 g
130 g
Dimensions
105 x 60 x 32 mm
85 x 60 x 35 mm
Year
2003
2005
Choose cameras to compare
Popular comparisons:
- Epson PhotoPC L-400 vs. Sony Cyber-shot DSC-TX30
- Epson PhotoPC L-400 vs. Rollei Compactline 55
- Epson PhotoPC L-400 vs. Epson PhotoPC 3100 Zoom
- Epson PhotoPC L-400 vs. Epson PhotoPC L-500V
- Epson PhotoPC L-400 vs. Panasonic Lumix DMC-FZ30
- Epson PhotoPC L-400 vs. Epson PhotoPC L-410
- Epson PhotoPC L-400 vs. Nikon Coolpix 5600
- Epson PhotoPC L-400 vs. HP Photosmart 945
- Epson PhotoPC L-400 vs. Epson PhotoPC 600
- Epson PhotoPC L-400 vs. Sony Cyber-shot DSC-HX50
- Canon EOS 200D vs. Canon EOS 750D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Epson L-400 diagonal
The diagonal of L-400 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Nikon 5600 diagonal
The diagonal of 5600 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
L-400 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
5600 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
L-400 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2335 pixels
Sensor resolution width = 2335 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.46 µm |
| 2335 |
5600 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.23 µm |
| 2579 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
L-400 pixel area
Pixel pitch = 2.46 µm
Pixel area = 2.46² = 6.05 µm²
Pixel area = 2.46² = 6.05 µm²
5600 pixel area
Pixel pitch = 2.23 µm
Pixel area = 2.23² = 4.97 µm²
Pixel area = 2.23² = 4.97 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
L-400 pixel density
Sensor resolution width = 2335 pixels
Sensor width = 0.575 cm
Pixel density = (2335 / 0.575)² / 1000000 = 16.49 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2335 / 0.575)² / 1000000 = 16.49 MP/cm²
5600 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
L-400 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 4.10
Resolution horizontal: X × r = 1756 × 1.33 = 2335
Resolution vertical: X = 1756
Sensor resolution = 2335 x 1756
Sensor height = 4.32 mm
Effective megapixels = 4.10
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1756
Sensor resolution = 2335 x 1756
5600 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 4.32 mm
Effective megapixels = 5.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
L-400 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
5600 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
L-400 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
5600 equivalent aperture
Crop factor = 6.02
Aperture = f2.9 - f4.9
35-mm equivalent aperture = (f2.9 - f4.9) × 6.02 = f17.5 - f29.5
Aperture = f2.9 - f4.9
35-mm equivalent aperture = (f2.9 - f4.9) × 6.02 = f17.5 - f29.5
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.