Fujifilm DS-260HD vs. AgfaPhoto DC-2030m
Comparison
change cameras » | |||||
|
vs |
|
|||
Fujifilm DS-260HD | AgfaPhoto DC-2030m | ||||
check price » | check price » |
Megapixels
1.30
12.00
Max. image resolution
1280 x 1024
4000 x 3000
Sensor
Sensor type
CCD
CCD
Sensor size
1/2" (~ 6.4 x 4.8 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.08 | : | 1 |
(ratio) | ||
Fujifilm DS-260HD | AgfaPhoto DC-2030m |
Surface area:
30.72 mm² | vs | 28.46 mm² |
Difference: 2.26 mm² (8%)
DS-260HD sensor is approx. 1.08x bigger than DC-2030m sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 10 years between Fujifilm DS-260HD (1999) and AgfaPhoto DC-2030m (2009).
Ten years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 21.35 µm² (901%)
A pixel on Fujifilm DS-260HD sensor is approx. 901% bigger than a pixel on AgfaPhoto DC-2030m.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Fujifilm DS-260HD
AgfaPhoto DC-2030m
Total megapixels
1.50
Effective megapixels
1.30
Optical zoom
3x
Yes
Digital zoom
No
Yes
ISO sensitivity
100
Auto, 125, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
90 cm
40 cm
Macro focus range
25 cm
10 cm
Focal length (35mm equiv.)
35 - 105 mm
37 - 112 mm
Aperture priority
Yes
No
Max. aperture
f2.8 - f4.5
f3.1 - f5.6
Metering
Multi, Average, Spot
Centre weighted, Multi-segment, Spot
Exposure compensation
±3 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
1/4 sec
8 sec
Max. shutter speed
1/1000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
None
White balance presets
6
6
Screen size
1.8"
2.7"
Screen resolution
200,000 dots
230,400 dots
Video capture
Max. video resolution
Storage types
SmartMedia
SDHC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion (NP-100)
2x AA
Weight
700 g
Dimensions
100 x 145 x 107 mm
89 x 61 x 27 mm
Year
1999
2009
Choose cameras to compare
Popular comparisons:
- Fujifilm DS-260HD vs. Pentax K20D
- Fujifilm DS-260HD vs. Sony Cyber-shot DSC-WX50
- Fujifilm DS-260HD vs. Fujifilm DS-300
- Fujifilm DS-260HD vs. AgfaPhoto DC-2030m
- Fujifilm DS-260HD vs. Fujifilm MX-600 Zoom
- Fujifilm DS-260HD vs. Canon EOS-1D Mark III
- Fujifilm DS-260HD vs. Nikon Coolpix S9500
- Fujifilm DS-260HD vs. Canon EOS 5D Mark III
- Fujifilm DS-260HD vs. Canon PowerShot SD500
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Fujifilm DS-260HD diagonal
The diagonal of DS-260HD sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
AgfaPhoto DC-2030m diagonal
The diagonal of DC-2030m sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DS-260HD sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
DC-2030m sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
DS-260HD pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1315 pixels
Sensor resolution width = 1315 pixels
Pixel pitch = | 6.40 | × 1000 | = 4.87 µm |
1315 |
DC-2030m pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 3995 pixels
Sensor resolution width = 3995 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.54 µm |
3995 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
DS-260HD pixel area
Pixel pitch = 4.87 µm
Pixel area = 4.87² = 23.72 µm²
Pixel area = 4.87² = 23.72 µm²
DC-2030m pixel area
Pixel pitch = 1.54 µm
Pixel area = 1.54² = 2.37 µm²
Pixel area = 1.54² = 2.37 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
DS-260HD pixel density
Sensor resolution width = 1315 pixels
Sensor width = 0.64 cm
Pixel density = (1315 / 0.64)² / 1000000 = 4.22 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1315 / 0.64)² / 1000000 = 4.22 MP/cm²
DC-2030m pixel density
Sensor resolution width = 3995 pixels
Sensor width = 0.616 cm
Pixel density = (3995 / 0.616)² / 1000000 = 42.06 MP/cm²
Sensor width = 0.616 cm
Pixel density = (3995 / 0.616)² / 1000000 = 42.06 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DS-260HD sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 1.30
Resolution horizontal: X × r = 989 × 1.33 = 1315
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
Sensor height = 4.80 mm
Effective megapixels = 1.30
r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
DC-2030m sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.00
Resolution horizontal: X × r = 3004 × 1.33 = 3995
Resolution vertical: X = 3004
Sensor resolution = 3995 x 3004
Sensor height = 4.62 mm
Effective megapixels = 12.00
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3004
Sensor resolution = 3995 x 3004
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
DS-260HD crop factor
Sensor diagonal in mm = 8.00 mm
Crop factor = | 43.27 | = 5.41 |
8.00 |
DC-2030m crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DS-260HD equivalent aperture
Crop factor = 5.41
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 5.41 = f15.1 - f24.3
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 5.41 = f15.1 - f24.3
DC-2030m equivalent aperture
Crop factor = 5.62
Aperture = f3.1 - f5.6
35-mm equivalent aperture = (f3.1 - f5.6) × 5.62 = f17.4 - f31.5
Aperture = f3.1 - f5.6
35-mm equivalent aperture = (f3.1 - f5.6) × 5.62 = f17.4 - f31.5
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.