Fujifilm FinePix 1400z vs. Sony Mavica FD-85
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Fujifilm FinePix 1400z | Sony Mavica FD-85 | ||||
| check price » | check price » | ||||
Megapixels
1.31
1.20
Max. image resolution
1280 x 960
1280 x 960
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.7" (~ 5.33 x 4 mm)
1/2.7" (~ 5.33 x 4 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| Fujifilm FinePix 1400z | Sony Mavica FD-85 | |
Surface area:
| 21.32 mm² | vs | 21.32 mm² |
Difference: 0 mm² (0%)
1400z and Mavica FD-85 sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.49 µm² (9%)
A pixel on Sony Mavica FD-85 sensor is approx. 9% bigger than a pixel on Fujifilm 1400z.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Fujifilm 1400z
Sony Mavica FD-85
Total megapixels
1.30
Effective megapixels
1.20
Optical zoom
Yes
3x
Digital zoom
Yes
Yes
ISO sensitivity
125
100
RAW
Manual focus
Normal focus range
80 cm
1 cm
Macro focus range
9 cm
1 cm
Focal length (35mm equiv.)
39 - 117 mm
37 - 111 mm
Aperture priority
No
No
Max. aperture
f3.6
f2.0 - f2.1
Metering
64-segment
Multi, Center-weighted, Spot
Exposure compensation
-0.9 - +1.5 EV (in 1/3 EV steps)
±1.5 EV (in 1/2 EV steps)
Shutter priority
No
No
Min. shutter speed
1/4 sec
8 sec
Max. shutter speed
1/750 sec
1/1000 sec
Built-in flash
External flash
Viewfinder
Optical and electronic
None
White balance presets
5
4
Screen size
1.6"
2.5"
Screen resolution
55,000 dots
123,000 dots
Video capture
Max. video resolution
Storage types
SmartMedia
Disk 3.5", MemoryStick via adapter
USB
USB 1.1
USB 1.0
HDMI
Wireless
GPS
Battery
4x AA
InfoLithium (NP-F330)
Weight
330 g
482 g
Dimensions
125 x 65 x 39 mm
107 x 62 x 136 mm
Year
2000
2000
Choose cameras to compare
Popular comparisons:
- Fujifilm FinePix 1400z vs. Sony Mavica FD-85
- Fujifilm FinePix 1400z vs. Canon EOS M
- Fujifilm FinePix 1400z vs. Casio Exilim EX-M1
- Fujifilm FinePix 1400z vs. Panasonic Lumix DMC-FZ3
- Fujifilm FinePix 1400z vs. Fujifilm FinePix A303
- Fujifilm FinePix 1400z vs. Konica-Minolta DiMAGE A2
- Fujifilm FinePix 1400z vs. Casio Exilim EX-FC100
- Fujifilm FinePix 1400z vs. Fujifilm FinePix 40i
- Fujifilm FinePix 1400z vs. Fujifilm FinePix IS-1
- Fujifilm FinePix 1400z vs. Fujifilm FinePix XP140
- Fujifilm FinePix 1400z vs. Nikon Coolpix S2800
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Fujifilm 1400z diagonal
The diagonal of 1400z sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
| Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Sony Mavica FD-85 diagonal
The diagonal of Mavica FD-85 sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
| Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
1400z sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Mavica FD-85 sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
1400z pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 1319 pixels
Sensor resolution width = 1319 pixels
| Pixel pitch = | 5.33 | × 1000 | = 4.04 µm |
| 1319 |
Mavica FD-85 pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 1264 pixels
Sensor resolution width = 1264 pixels
| Pixel pitch = | 5.33 | × 1000 | = 4.22 µm |
| 1264 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
1400z pixel area
Pixel pitch = 4.04 µm
Pixel area = 4.04² = 16.32 µm²
Pixel area = 4.04² = 16.32 µm²
Mavica FD-85 pixel area
Pixel pitch = 4.22 µm
Pixel area = 4.22² = 17.81 µm²
Pixel area = 4.22² = 17.81 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
1400z pixel density
Sensor resolution width = 1319 pixels
Sensor width = 0.533 cm
Pixel density = (1319 / 0.533)² / 1000000 = 6.12 MP/cm²
Sensor width = 0.533 cm
Pixel density = (1319 / 0.533)² / 1000000 = 6.12 MP/cm²
Mavica FD-85 pixel density
Sensor resolution width = 1264 pixels
Sensor width = 0.533 cm
Pixel density = (1264 / 0.533)² / 1000000 = 5.62 MP/cm²
Sensor width = 0.533 cm
Pixel density = (1264 / 0.533)² / 1000000 = 5.62 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
1400z sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 1.31
Resolution horizontal: X × r = 992 × 1.33 = 1319
Resolution vertical: X = 992
Sensor resolution = 1319 x 992
Sensor height = 4.00 mm
Effective megapixels = 1.31
| r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 992
Sensor resolution = 1319 x 992
Mavica FD-85 sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 1.20
Resolution horizontal: X × r = 950 × 1.33 = 1264
Resolution vertical: X = 950
Sensor resolution = 1264 x 950
Sensor height = 4.00 mm
Effective megapixels = 1.20
| r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 950
Sensor resolution = 1264 x 950
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
1400z crop factor
Sensor diagonal in mm = 6.66 mm
| Crop factor = | 43.27 | = 6.5 |
| 6.66 |
Mavica FD-85 crop factor
Sensor diagonal in mm = 6.66 mm
| Crop factor = | 43.27 | = 6.5 |
| 6.66 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
1400z equivalent aperture
Crop factor = 6.5
Aperture = f3.6
35-mm equivalent aperture = (f3.6) × 6.5 = f23.4
Aperture = f3.6
35-mm equivalent aperture = (f3.6) × 6.5 = f23.4
Mavica FD-85 equivalent aperture
Crop factor = 6.5
Aperture = f2.0 - f2.1
35-mm equivalent aperture = (f2.0 - f2.1) × 6.5 = f13 - f13.7
Aperture = f2.0 - f2.1
35-mm equivalent aperture = (f2.0 - f2.1) × 6.5 = f13 - f13.7
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.