Fujifilm FinePix F410 Zoom vs. Fujifilm FinePix F40fd

Comparison

change cameras »

Fujifilm FinePix F410 Zoom

Fujifilm FinePix F40fd

check price »

Megapixels

3.10

8.10

Max. image resolution

2816 x 2120

3296 x 2472

Sensor

Sensor type

CCD

Sensor size

1/2.7" (~ 5.33 x 4 mm)

1/1.6" (~ 8 x 6 mm)

Sensor resolution

2031 x 1527

3282 x 2468

Diagonal

6.66 mm

10.00 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	2.25
(ratio)

Fujifilm FinePix F410 Zoom		Fujifilm FinePix F40fd

Surface area:

21.32 mm²

48.00 mm²

Difference: 26.68 mm² (125%)

F40fd sensor is approx. 2.25x bigger than F410 Zoom sensor.

Note: You are comparing cameras of different generations. There is a 4 year gap between Fujifilm F410 Zoom (2003) and Fujifilm F40fd (2007). All things being equal, newer sensor generations generally outperform the older.

Pixel pitch

2.62 µm

2.44 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 0.18 µm (7%)

Pixel pitch of F410 Zoom is approx. 7% higher than pixel pitch of F40fd.

Pixel area

6.86 µm²

5.95 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 0.91 µm² (15%)

A pixel on Fujifilm F410 Zoom sensor is approx. 15% bigger than a pixel on Fujifilm F40fd.

Pixel density

14.52 MP/cm²

16.83 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 2.31 µm (16%)

Fujifilm F40fd has approx. 16% higher pixel density than Fujifilm F410 Zoom.

To learn about the accuracy of these numbers, click here.

Specs

Fujifilm F410 Zoom

Fujifilm F40fd

Crop factor

6.5

4.33

Total megapixels

3.10

8.30

Effective megapixels

3.10

8.10

Optical zoom

Digital zoom

Yes

ISO sensitivity

200, 400 (higher at 1280 x 960)

Auto, 100, 200, 400, 800, 1600, 2000

RAW

Manual focus

Normal focus range

60 cm

45 cm

Macro focus range

10 cm

7 cm

Focal length (35mm equiv.)

38 - 114 mm

35 - 105 mm

Aperture priority

Max. aperture

f2.8 - f4.8

f2.8 - f5.1

Max. aperture (35mm equiv.)

f18.2 - f31.2

f12.1 - f22.1

Metering

Multi, Average, Spot

Matrix, Multi-segment, Spot

Exposure compensation

-2.1 - +1.5 EV (in 1/3 EV steps)

±2 EV (in 1/3 EV steps)

Shutter priority

Min. shutter speed

1/4 sec

3 sec

Max. shutter speed

1/2000 sec

Built-in flash

External flash

Viewfinder

Optical (tunnel)

None

White balance presets

Screen size

1.5"

2.5"

Screen resolution

118,000 dots

230,000 dots

Video capture

Max. video resolution

Storage types

xD Picture Card

xD Picture card

USB

USB 1.0

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

Lithium-Ion (NP-60)

Lithium-Ion (NP-70)

Weight

205 g

181 g

Dimensions

85 x 69 x 28 mm

95.7 x 59.0 x 23.3 mm

Year

2003

2007

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Fujifilm F410 Zoom diagonal

The diagonal of F410 Zoom sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of that value - 6.66 mm. If you want to know why, see sensor sizes.

w = 5.33 mm
h = 4.00 mm

Diagonal = √

5.33² + 4.00²

= 6.66 mm

Fujifilm F40fd diagonal

The diagonal of F40fd sensor is not 1/1.6 or 0.63" (15.9 mm) as you might expect, but approximately two thirds of that value - 10 mm. If you want to know why, see sensor sizes.

w = 8.00 mm
h = 6.00 mm

Diagonal = √

8.00² + 6.00²

= 10.00 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

F410 Zoom sensor area

Width = 5.33 mm
Height = 4.00 mm

Surface area = 5.33 × 4.00 = 21.32 mm²

F40fd sensor area

Width = 8.00 mm
Height = 6.00 mm

Surface area = 8.00 × 6.00 = 48.00 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

F410 Zoom pixel pitch

Sensor width = 5.33 mm
Sensor resolution width = 2031 pixels

Pixel pitch =	5.33	× 1000	= 2.62 µm
	2031

F40fd pixel pitch

Sensor width = 8.00 mm
Sensor resolution width = 3282 pixels

Pixel pitch =	8.00	× 1000	= 2.44 µm
	3282

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

F410 Zoom pixel area

Pixel pitch = 2.62 µm

Pixel area = 2.62² = 6.86 µm²

F40fd pixel area

Pixel pitch = 2.44 µm

Pixel area = 2.44² = 5.95 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

F410 Zoom pixel density

Sensor resolution width = 2031 pixels
Sensor width = 0.533 cm

Pixel density = (2031 / 0.533)² / 1000000 = 14.52 MP/cm²

F40fd pixel density

Sensor resolution width = 3282 pixels
Sensor width = 0.8 cm

Pixel density = (3282 / 0.8)² / 1000000 = 16.83 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

F410 Zoom sensor resolution

Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 3.10

r = 5.33/4.00 = 1.33

X = √	3.10 × 1000000	= 1527
	1.33

Resolution horizontal: X × r = 1527 × 1.33 = 2031
Resolution vertical: X = 1527

Sensor resolution = 2031 x 1527

F40fd sensor resolution

Sensor width = 8.00 mm
Sensor height = 6.00 mm
Effective megapixels = 8.10

r = 8.00/6.00 = 1.33

X = √	8.10 × 1000000	= 2468
	1.33

Resolution horizontal: X × r = 2468 × 1.33 = 3282
Resolution vertical: X = 2468

Sensor resolution = 3282 x 2468

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

F410 Zoom crop factor

Sensor diagonal in mm = 6.66 mm

Crop factor =	43.27	= 6.5
	6.66

F40fd crop factor

Sensor diagonal in mm = 10.00 mm

Crop factor =	43.27	= 4.33
	10.00

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

F410 Zoom equivalent aperture

Crop factor = 6.5
Aperture = f2.8 - f4.8

35-mm equivalent aperture = (f2.8 - f4.8) × 6.5 = f18.2 - f31.2

F40fd equivalent aperture

Crop factor = 4.33
Aperture = f2.8 - f5.1

35-mm equivalent aperture = (f2.8 - f5.1) × 4.33 = f12.1 - f22.1

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.