Fujifilm FinePix F601 Zoom vs. Fujifilm FinePix A220

Comparison

change cameras »

Fujifilm FinePix F601 Zoom

Fujifilm FinePix A220

check price »

Megapixels

6.00

12.00

Max. image resolution

2832 x 2128

4000 x 3000

Sensor

Sensor type

CCD

Sensor size

1/1.7" (~ 7.53 x 5.64 mm)

1/2.3" (~ 6.16 x 4.62 mm)

Sensor resolution

2835 x 2116

3995 x 3004

Diagonal

9.41 mm

7.70 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1.49	:	1
(ratio)

Fujifilm FinePix F601 Zoom		Fujifilm FinePix A220

Surface area:

42.47 mm²

28.46 mm²

Difference: 14.01 mm² (49%)

F601 Zoom sensor is approx. 1.49x bigger than A220 sensor.

Note: You are comparing sensors of very different generations. There is a gap of 7 years between Fujifilm F601 Zoom (2002) and Fujifilm A220 (2009). Seven years is a lot of time in terms of technology, meaning newer sensors are overall much more efficient than the older ones.

Pixel pitch

2.66 µm

1.54 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 1.12 µm (73%)

Pixel pitch of F601 Zoom is approx. 73% higher than pixel pitch of A220.

Pixel area

7.08 µm²

2.37 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 4.71 µm² (199%)

A pixel on Fujifilm F601 Zoom sensor is approx. 199% bigger than a pixel on Fujifilm A220.

Pixel density

14.17 MP/cm²

42.06 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 27.89 µm (197%)

Fujifilm A220 has approx. 197% higher pixel density than Fujifilm F601 Zoom.

To learn about the accuracy of these numbers, click here.

Specs

Fujifilm F601 Zoom

Fujifilm A220

Crop factor

4.6

5.62

Total megapixels

Effective megapixels

6.00

Optical zoom

Yes

Digital zoom

Yes

ISO sensitivity

160, 200, 400 (higher at 1280 x 960)

Auto, 100, 200, 400, 800, 1600

RAW

Manual focus

Normal focus range

60 cm

Macro focus range

20 cm

10 cm

Focal length (35mm equiv.)

36 - 108 mm

32 - 96 mm

Aperture priority

Yes

Max. aperture

f2.8 - f4.5

f2.9 - f5.2

Max. aperture (35mm equiv.)

f12.9 - f20.7

f16.3 - f29.2

Metering

Multi, Average, Spot

TTL 256-zones metering

Exposure compensation

±2 EV (in 1/3 EV steps)

Shutter priority

Yes

Min. shutter speed

3 sec

8 sec

Max. shutter speed

1/2000 sec

1/1400 sec

Built-in flash

External flash

Viewfinder

Optical (tunnel)

None

White balance presets

Screen size

1.5"

2.7"

Screen resolution

110,000 dots

230,000 dots

Video capture

Max. video resolution

Storage types

SmartMedia

SDHC, Secure Digital

USB

USB 1.0

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

Lithium-Ion (NP-60)

2x AA

Weight

280 g

120 g

Dimensions

72 x 93 x 34 mm

93 x 60 x 26.5 mm

Year

2002

2009

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Fujifilm F601 Zoom diagonal

The diagonal of F601 Zoom sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of that value - 9.41 mm. If you want to know why, see sensor sizes.

w = 7.53 mm
h = 5.64 mm

Diagonal = √

7.53² + 5.64²

= 9.41 mm

Fujifilm A220 diagonal

The diagonal of A220 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm

Diagonal = √

6.16² + 4.62²

= 7.70 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

F601 Zoom sensor area

Width = 7.53 mm
Height = 5.64 mm

Surface area = 7.53 × 5.64 = 42.47 mm²

A220 sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

F601 Zoom pixel pitch

Sensor width = 7.53 mm
Sensor resolution width = 2835 pixels

Pixel pitch =	7.53	× 1000	= 2.66 µm
	2835

A220 pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 3995 pixels

Pixel pitch =	6.16	× 1000	= 1.54 µm
	3995

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

F601 Zoom pixel area

Pixel pitch = 2.66 µm

Pixel area = 2.66² = 7.08 µm²

A220 pixel area

Pixel pitch = 1.54 µm

Pixel area = 1.54² = 2.37 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

F601 Zoom pixel density

Sensor resolution width = 2835 pixels
Sensor width = 0.753 cm

Pixel density = (2835 / 0.753)² / 1000000 = 14.17 MP/cm²

A220 pixel density

Sensor resolution width = 3995 pixels
Sensor width = 0.616 cm

Pixel density = (3995 / 0.616)² / 1000000 = 42.06 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

F601 Zoom sensor resolution

Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 6.00

r = 7.53/5.64 = 1.34

X = √	6.00 × 1000000	= 2116
	1.34

Resolution horizontal: X × r = 2116 × 1.34 = 2835
Resolution vertical: X = 2116

Sensor resolution = 2835 x 2116

A220 sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.00

r = 6.16/4.62 = 1.33

X = √	12.00 × 1000000	= 3004
	1.33

Resolution horizontal: X × r = 3004 × 1.33 = 3995
Resolution vertical: X = 3004

Sensor resolution = 3995 x 3004

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

F601 Zoom crop factor

Sensor diagonal in mm = 9.41 mm

Crop factor =	43.27	= 4.6
	9.41

A220 crop factor

Sensor diagonal in mm = 7.70 mm

Crop factor =	43.27	= 5.62
	7.70

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

F601 Zoom equivalent aperture

Crop factor = 4.6
Aperture = f2.8 - f4.5

35-mm equivalent aperture = (f2.8 - f4.5) × 4.6 = f12.9 - f20.7

A220 equivalent aperture

Crop factor = 5.62
Aperture = f2.9 - f5.2

35-mm equivalent aperture = (f2.9 - f5.2) × 5.62 = f16.3 - f29.2

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.