Fujifilm FinePix F700 vs. Fujifilm FinePix F810 Zoom

Comparison

change cameras »
FinePix F700 image
vs
FinePix F810 Zoom image
Fujifilm FinePix F700 Fujifilm FinePix F810 Zoom
check price » check price »
Megapixels
3.10
6.00
Max. image resolution
2832 x 2128
4048 x 3040

Sensor

Sensor type
CCD
CCD
Sensor size
1/1.7" (~ 7.53 x 5.64 mm)
1/1.7" (~ 7.53 x 5.64 mm)
Sensor resolution
2038 x 1521
2835 x 2116
Diagonal
9.41 mm
9.41 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1
(ratio)
Fujifilm FinePix F700 Fujifilm FinePix F810 Zoom
Surface area:
42.47 mm² vs 42.47 mm²
Difference: 0 mm² (0%)
F700 and F810 Zoom sensors are the same size.
Pixel pitch
3.69 µm
2.66 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 1.03 µm (39%)
Pixel pitch of F700 is approx. 39% higher than pixel pitch of F810 Zoom.
Pixel area
13.62 µm²
7.08 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 6.54 µm² (92%)
A pixel on Fujifilm F700 sensor is approx. 92% bigger than a pixel on Fujifilm F810 Zoom.
Pixel density
7.33 MP/cm²
14.17 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 6.84 µm (93%)
Fujifilm F810 Zoom has approx. 93% higher pixel density than Fujifilm F700.
To learn about the accuracy of these numbers, click here.



Specs

Fujifilm F700
Fujifilm F810 Zoom
Crop factor
4.6
4.6
Total megapixels
6.30
6.30
Effective megapixels
3.10
6.00
Optical zoom
3x
4x
Digital zoom
Yes
Yes
ISO sensitivity
160, 200, 400, 800
Auto, 80, 100, 200, 400, 800
RAW
Manual focus
Normal focus range
60 cm
60 cm
Macro focus range
9 cm
7 cm
Focal length (35mm equiv.)
35 - 105 mm
33 - 130 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f4.9
f2.8 - f5.6
Max. aperture (35mm equiv.)
f12.9 - f22.5
f12.9 - f25.8
Metering
64-segment, Multi Spot, Spot
Multi, Average, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
3 sec
3 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
7
7
Screen size
1.8"
2.1"
Screen resolution
134,000 dots
173,000 dots
Video capture
Max. video resolution
Storage types
xD Picture card
xD Picture Card
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
Lithium-Ion (NP-40)
Lithium-Ion (NP-40)
Weight
190 g
250 g
Dimensions
108 x 54 x 28 mm
110 x 54 x 29 mm
Year
2003
2004




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Fujifilm F700 diagonal

The diagonal of F700 sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of that value - 9.41 mm. If you want to know why, see sensor sizes.

w = 7.53 mm
h = 5.64 mm
Diagonal =  7.53² + 5.64²   = 9.41 mm

Fujifilm F810 Zoom diagonal

The diagonal of F810 Zoom sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of that value - 9.41 mm. If you want to know why, see sensor sizes.

w = 7.53 mm
h = 5.64 mm
Diagonal =  7.53² + 5.64²   = 9.41 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

F700 sensor area

Width = 7.53 mm
Height = 5.64 mm

Surface area = 7.53 × 5.64 = 42.47 mm²

F810 Zoom sensor area

Width = 7.53 mm
Height = 5.64 mm

Surface area = 7.53 × 5.64 = 42.47 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

F700 pixel pitch

Sensor width = 7.53 mm
Sensor resolution width = 2038 pixels
Pixel pitch =   7.53  × 1000  = 3.69 µm
2038

F810 Zoom pixel pitch

Sensor width = 7.53 mm
Sensor resolution width = 2835 pixels
Pixel pitch =   7.53  × 1000  = 2.66 µm
2835


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

F700 pixel area

Pixel pitch = 3.69 µm

Pixel area = 3.69² = 13.62 µm²

F810 Zoom pixel area

Pixel pitch = 2.66 µm

Pixel area = 2.66² = 7.08 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

F700 pixel density

Sensor resolution width = 2038 pixels
Sensor width = 0.753 cm

Pixel density = (2038 / 0.753)² / 1000000 = 7.33 MP/cm²

F810 Zoom pixel density

Sensor resolution width = 2835 pixels
Sensor width = 0.753 cm

Pixel density = (2835 / 0.753)² / 1000000 = 14.17 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

F700 sensor resolution

Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 3.10
r = 7.53/5.64 = 1.34
X =  3.10 × 1000000  = 1521
1.34
Resolution horizontal: X × r = 1521 × 1.34 = 2038
Resolution vertical: X = 1521

Sensor resolution = 2038 x 1521

F810 Zoom sensor resolution

Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 6.00
r = 7.53/5.64 = 1.34
X =  6.00 × 1000000  = 2116
1.34
Resolution horizontal: X × r = 2116 × 1.34 = 2835
Resolution vertical: X = 2116

Sensor resolution = 2835 x 2116


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


F700 crop factor

Sensor diagonal in mm = 9.41 mm
Crop factor =   43.27  = 4.6
9.41

F810 Zoom crop factor

Sensor diagonal in mm = 9.41 mm
Crop factor =   43.27  = 4.6
9.41

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

F700 equivalent aperture

Crop factor = 4.6
Aperture = f2.8 - f4.9

35-mm equivalent aperture = (f2.8 - f4.9) × 4.6 = f12.9 - f22.5

F810 Zoom equivalent aperture

Crop factor = 4.6
Aperture = f2.8 - f5.6

35-mm equivalent aperture = (f2.8 - f5.6) × 4.6 = f12.9 - f25.8

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.