Fujifilm FinePix J20 vs. Fujifilm X-T2
Comparison
change cameras » | |||||
|
vs |
|
|||
Fujifilm FinePix J20 | Fujifilm X-T2 | ||||
check price » | check price » |
Megapixels
10.00
24.30
Max. image resolution
3648 x 2736
6000 x 4000
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
23.6 x 15.6 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 12.94 |
(ratio) | ||
Fujifilm FinePix J20 | Fujifilm X-T2 |
Surface area:
28.46 mm² | vs | 368.16 mm² |
Difference: 339.7 mm² (1194%)
X-T2 sensor is approx. 12.94x bigger than J20 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 8 years between Fujifilm J20 (2008) and Fujifilm X-T2 (2016).
Eight years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 12.35 µm² (432%)
A pixel on Fujifilm X-T2 sensor is approx. 432% bigger than a pixel on Fujifilm J20.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Fujifilm J20
Fujifilm X-T2
Total megapixels
Effective megapixels
10.00
24.30
Optical zoom
3x
Digital zoom
Yes
No
ISO sensitivity
Auto, 100, 200, 400, 800, 1600
Auto, 200 -12800 (expands to 100-51200)
RAW
Manual focus
Normal focus range
40 cm
Macro focus range
10 cm
Focal length (35mm equiv.)
36 - 107 mm
Aperture priority
No
Yes
Max. aperture
f3.1 - f5.6
Metering
TTL 256-zones metering
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
8 sec
30 sec
Max. shutter speed
1/2000 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
6
7
Screen size
2.7"
3"
Screen resolution
230,000 dots
1,040,000 dots
Video capture
Max. video resolution
3840x2160 (30p/25p/24p)
Storage types
SDHC, Secure Digital
SD/SDHC/SDXC (UHS II)
USB
USB 2.0 (480 Mbit/sec)
USB 3.0 (5 GBit/sec)
HDMI
Wireless
GPS
Battery
NP-45 Li Ion battery
NP-W126S lithium-ion battery
Weight
100 g
507 g
Dimensions
91 x 56 x 17 mm
132.5 x 91.8 x 49.2 mm
Year
2008
2016
Choose cameras to compare
Popular comparisons:
- Fujifilm FinePix J20 vs. Nikon Coolpix S3300
- Fujifilm FinePix J20 vs. Canon PowerShot ELPH 135
- Fujifilm FinePix J20 vs. Fujifilm FinePix JX500
- Fujifilm FinePix J20 vs. Fujifilm FinePix J28
- Fujifilm FinePix J20 vs. Fujifilm FinePix J30
- Fujifilm FinePix J20 vs. Canon PowerShot A2300
- Fujifilm FinePix J20 vs. Canon PowerShot ELPH 330 HS
- Fujifilm FinePix J20 vs. Fujifilm FinePix J29
- Fujifilm FinePix J20 vs. Canon PowerShot SD400
- Fujifilm FinePix J20 vs. Nikon D5300
- Fujifilm FinePix J20 vs. Canon PowerShot A410
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Fujifilm J20 diagonal
The diagonal of J20 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Fujifilm X-T2 diagonal
w = 23.60 mm
h = 15.60 mm
h = 15.60 mm
Diagonal = √ | 23.60² + 15.60² | = 28.29 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
J20 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
X-T2 sensor area
Width = 23.60 mm
Height = 15.60 mm
Surface area = 23.60 × 15.60 = 368.16 mm²
Height = 15.60 mm
Surface area = 23.60 × 15.60 = 368.16 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
J20 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 3647 pixels
Sensor resolution width = 3647 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.69 µm |
3647 |
X-T2 pixel pitch
Sensor width = 23.60 mm
Sensor resolution width = 6058 pixels
Sensor resolution width = 6058 pixels
Pixel pitch = | 23.60 | × 1000 | = 3.9 µm |
6058 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
J20 pixel area
Pixel pitch = 1.69 µm
Pixel area = 1.69² = 2.86 µm²
Pixel area = 1.69² = 2.86 µm²
X-T2 pixel area
Pixel pitch = 3.9 µm
Pixel area = 3.9² = 15.21 µm²
Pixel area = 3.9² = 15.21 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
J20 pixel density
Sensor resolution width = 3647 pixels
Sensor width = 0.616 cm
Pixel density = (3647 / 0.616)² / 1000000 = 35.05 MP/cm²
Sensor width = 0.616 cm
Pixel density = (3647 / 0.616)² / 1000000 = 35.05 MP/cm²
X-T2 pixel density
Sensor resolution width = 6058 pixels
Sensor width = 2.36 cm
Pixel density = (6058 / 2.36)² / 1000000 = 6.59 MP/cm²
Sensor width = 2.36 cm
Pixel density = (6058 / 2.36)² / 1000000 = 6.59 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
J20 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 10.00
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Sensor height = 4.62 mm
Effective megapixels = 10.00
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
X-T2 sensor resolution
Sensor width = 23.60 mm
Sensor height = 15.60 mm
Effective megapixels = 24.30
Resolution horizontal: X × r = 4012 × 1.51 = 6058
Resolution vertical: X = 4012
Sensor resolution = 6058 x 4012
Sensor height = 15.60 mm
Effective megapixels = 24.30
r = 23.60/15.60 = 1.51 |
|
Resolution vertical: X = 4012
Sensor resolution = 6058 x 4012
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
J20 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
X-T2 crop factor
Sensor diagonal in mm = 28.29 mm
Crop factor = | 43.27 | = 1.53 |
28.29 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
J20 equivalent aperture
Crop factor = 5.62
Aperture = f3.1 - f5.6
35-mm equivalent aperture = (f3.1 - f5.6) × 5.62 = f17.4 - f31.5
Aperture = f3.1 - f5.6
35-mm equivalent aperture = (f3.1 - f5.6) × 5.62 = f17.4 - f31.5
X-T2 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Fujifilm X-T2, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Fujifilm X-T2 is 1.53
Crop factor for Fujifilm X-T2 is 1.53
More comparisons of Fujifilm J20:
- Fujifilm FinePix J20 vs. Nikon Coolpix P7700
- Fujifilm FinePix J20 vs. Canon IXUS 132
- Fujifilm FinePix J20 vs. Canon PowerShot SX50 HS
- Fujifilm FinePix J20 vs. Olympus VG-165
- Fujifilm FinePix J20 vs. Leica D-LUX 4
- Fujifilm FinePix J20 vs. Fujifilm FinePix J22
- Fujifilm FinePix J20 vs. Nikon Coolpix 7600
- Fujifilm FinePix J20 vs. Nikon Coolpix 2200
- Fujifilm FinePix J20 vs. Panasonic Lumix DMC-S1
- Fujifilm FinePix J20 vs. Fujifilm FinePix JZ100
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.