Fujifilm FinePix Real 3D W1 vs. Fujifilm X-S1
Comparison
change cameras » | |||||
|
vs |
|
|||
Fujifilm FinePix Real 3D W1 | Fujifilm X-S1 | ||||
check price » | check price » |
Megapixels
10.00
12.00
Max. image resolution
3648 x 2736
4000 x 3000
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
2/3" (~ 8.8 x 6.6 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 2.04 |
(ratio) | ||
Fujifilm FinePix Real 3D W1 | Fujifilm X-S1 |
Surface area:
28.46 mm² | vs | 58.08 mm² |
Difference: 29.62 mm² (104%)
X-S1 sensor is approx. 2.04x bigger than Real 3D W1 sensor.
Note: You are comparing cameras of different generations.
There is a 2 year gap between Fujifilm Real 3D W1 (2009) and Fujifilm X-S1 (2011).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.98 µm² (69%)
A pixel on Fujifilm X-S1 sensor is approx. 69% bigger than a pixel on Fujifilm Real 3D W1.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Fujifilm Real 3D W1
Fujifilm X-S1
Total megapixels
Effective megapixels
10.00
12.00
Optical zoom
3x
26x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600
Auto, 100, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, (4000, 5000, 6400, 12800 with boost)
RAW
Manual focus
Normal focus range
60 cm
30 cm
Macro focus range
8 cm
1 cm
Focal length (35mm equiv.)
35 - 105 mm
24 - 624 mm
Aperture priority
No
Yes
Max. aperture
f3.7 - f4.2
f2.8 - f5.6
Metering
TTL 256-zones metering
Multi, Average, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
3 sec
30 sec
Max. shutter speed
1/1000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
7
6
Screen size
2.8"
3"
Screen resolution
230,000 dots
460,000 dots
Video capture
Max. video resolution
1920x1080 (30p)
Storage types
SDHC, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-ion NP-95 rechargeable battery
Lithium-Ion NP-95 rechargeable battery
Weight
290 g
920 g
Dimensions
124 x 68 x 26 mm
135 x 107 x 149 mm
Year
2009
2011
Choose cameras to compare
Popular comparisons:
- Fujifilm FinePix Real 3D W1 vs. Fujifilm FinePix Real 3D W3
- Fujifilm FinePix Real 3D W1 vs. Panasonic Lumix DMC-3D1
- Fujifilm FinePix Real 3D W1 vs. Samsung AQ100
- Fujifilm FinePix Real 3D W1 vs. Fujifilm X-S1
- Fujifilm FinePix Real 3D W1 vs. Sony Cyber-shot DSC-T100
- Fujifilm FinePix Real 3D W1 vs. Sony Alpha SLT-A37
- Fujifilm FinePix Real 3D W1 vs. Olympus C-2100 UZ
- Fujifilm FinePix Real 3D W1 vs. Sony Cyber-shot DSC-W830
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Fujifilm Real 3D W1 diagonal
The diagonal of Real 3D W1 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Fujifilm X-S1 diagonal
The diagonal of X-S1 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Real 3D W1 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
X-S1 sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
Real 3D W1 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 3647 pixels
Sensor resolution width = 3647 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.69 µm |
3647 |
X-S1 pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 3995 pixels
Sensor resolution width = 3995 pixels
Pixel pitch = | 8.80 | × 1000 | = 2.2 µm |
3995 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
Real 3D W1 pixel area
Pixel pitch = 1.69 µm
Pixel area = 1.69² = 2.86 µm²
Pixel area = 1.69² = 2.86 µm²
X-S1 pixel area
Pixel pitch = 2.2 µm
Pixel area = 2.2² = 4.84 µm²
Pixel area = 2.2² = 4.84 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
Real 3D W1 pixel density
Sensor resolution width = 3647 pixels
Sensor width = 0.616 cm
Pixel density = (3647 / 0.616)² / 1000000 = 35.05 MP/cm²
Sensor width = 0.616 cm
Pixel density = (3647 / 0.616)² / 1000000 = 35.05 MP/cm²
X-S1 pixel density
Sensor resolution width = 3995 pixels
Sensor width = 0.88 cm
Pixel density = (3995 / 0.88)² / 1000000 = 20.61 MP/cm²
Sensor width = 0.88 cm
Pixel density = (3995 / 0.88)² / 1000000 = 20.61 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Real 3D W1 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 10.00
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Sensor height = 4.62 mm
Effective megapixels = 10.00
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
X-S1 sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 12.00
Resolution horizontal: X × r = 3004 × 1.33 = 3995
Resolution vertical: X = 3004
Sensor resolution = 3995 x 3004
Sensor height = 6.60 mm
Effective megapixels = 12.00
r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 3004
Sensor resolution = 3995 x 3004
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
Real 3D W1 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
X-S1 crop factor
Sensor diagonal in mm = 11.00 mm
Crop factor = | 43.27 | = 3.93 |
11.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Real 3D W1 equivalent aperture
Crop factor = 5.62
Aperture = f3.7 - f4.2
35-mm equivalent aperture = (f3.7 - f4.2) × 5.62 = f20.8 - f23.6
Aperture = f3.7 - f4.2
35-mm equivalent aperture = (f3.7 - f4.2) × 5.62 = f20.8 - f23.6
X-S1 equivalent aperture
Crop factor = 3.93
Aperture = f2.8 - f5.6
35-mm equivalent aperture = (f2.8 - f5.6) × 3.93 = f11 - f22
Aperture = f2.8 - f5.6
35-mm equivalent aperture = (f2.8 - f5.6) × 3.93 = f11 - f22
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.