Fujifilm FinePix S3000 Z vs. Sony Cyber-shot DSC-WX220
Comparison
change cameras » | |||||
|
vs |
|
|||
Fujifilm FinePix S3000 Z | Sony Cyber-shot DSC-WX220 | ||||
check price » | check price » |
Megapixels
3.10
18.20
Max. image resolution
2048 x 1536
4896 x 3672
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.7" (~ 5.33 x 4 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.33 |
(ratio) | ||
Fujifilm FinePix S3000 Z | Sony Cyber-shot DSC-WX220 |
Surface area:
21.32 mm² | vs | 28.46 mm² |
Difference: 7.14 mm² (33%)
WX220 sensor is approx. 1.33x bigger than S3000 Z sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 11 years between Fujifilm S3000 Z (2003) and
Sony WX220 (2014).
Eleven years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 5.3 µm² (340%)
A pixel on Fujifilm S3000 Z sensor is approx. 340% bigger than a pixel on Sony WX220.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Fujifilm S3000 Z
Sony WX220
Total megapixels
3.20
Effective megapixels
3.10
18.20
Optical zoom
6x
10x
Digital zoom
Yes
Yes
ISO sensitivity
100
Auto, 100, 200, 400, 800, 1600, 3200, 6400, 12800
RAW
Manual focus
Normal focus range
80 cm
Macro focus range
10 cm
5 cm
Focal length (35mm equiv.)
38 - 228 mm
25 - 250 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.8
f3.3 - f5.9
Metering
Multi, Average, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
3 sec
1 sec
Max. shutter speed
1/1500 sec
1/1600 sec
Built-in flash
External flash
Viewfinder
Electronic
None
White balance presets
7
7
Screen size
1.8"
2.7"
Screen resolution
62,000 dots
460,800 dots
Video capture
Max. video resolution
1920x1080 (60p/60i)
Storage types
xD Picture Card
SD/SDHC/SDXC, Memory Stick Duo/Pro Duo/Pro-HG Duo
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
Battery Pack NP-BN
Weight
400 g
121 g
Dimensions
100 x 77 x 69 mm
92.3 x 52.4 x 21.6 mm
Year
2003
2014
Choose cameras to compare
Popular comparisons:
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix S1500
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix S5000 Zoom
- Fujifilm FinePix S3000 Z vs. BenQ GH600
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix S304
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix S2980
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix S3500 Zoom
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix F31fd
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix 3800
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix S5700 Zoom
- Fujifilm FinePix S3000 Z vs. Sony Cyber-shot DSC-WX220
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix S8100fd
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Fujifilm S3000 Z diagonal
The diagonal of S3000 Z sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Sony WX220 diagonal
The diagonal of WX220 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
S3000 Z sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
WX220 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
S3000 Z pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 2031 pixels
Sensor resolution width = 2031 pixels
Pixel pitch = | 5.33 | × 1000 | = 2.62 µm |
2031 |
WX220 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4920 pixels
Sensor resolution width = 4920 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.25 µm |
4920 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
S3000 Z pixel area
Pixel pitch = 2.62 µm
Pixel area = 2.62² = 6.86 µm²
Pixel area = 2.62² = 6.86 µm²
WX220 pixel area
Pixel pitch = 1.25 µm
Pixel area = 1.25² = 1.56 µm²
Pixel area = 1.25² = 1.56 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
S3000 Z pixel density
Sensor resolution width = 2031 pixels
Sensor width = 0.533 cm
Pixel density = (2031 / 0.533)² / 1000000 = 14.52 MP/cm²
Sensor width = 0.533 cm
Pixel density = (2031 / 0.533)² / 1000000 = 14.52 MP/cm²
WX220 pixel density
Sensor resolution width = 4920 pixels
Sensor width = 0.616 cm
Pixel density = (4920 / 0.616)² / 1000000 = 63.79 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4920 / 0.616)² / 1000000 = 63.79 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
S3000 Z sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 3.10
Resolution horizontal: X × r = 1527 × 1.33 = 2031
Resolution vertical: X = 1527
Sensor resolution = 2031 x 1527
Sensor height = 4.00 mm
Effective megapixels = 3.10
r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 1527
Sensor resolution = 2031 x 1527
WX220 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 18.20
Resolution horizontal: X × r = 3699 × 1.33 = 4920
Resolution vertical: X = 3699
Sensor resolution = 4920 x 3699
Sensor height = 4.62 mm
Effective megapixels = 18.20
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3699
Sensor resolution = 4920 x 3699
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
S3000 Z crop factor
Sensor diagonal in mm = 6.66 mm
Crop factor = | 43.27 | = 6.5 |
6.66 |
WX220 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
S3000 Z equivalent aperture
Crop factor = 6.5
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 6.5 = f18.2 - f31.2
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 6.5 = f18.2 - f31.2
WX220 equivalent aperture
Crop factor = 5.62
Aperture = f3.3 - f5.9
35-mm equivalent aperture = (f3.3 - f5.9) × 5.62 = f18.5 - f33.2
Aperture = f3.3 - f5.9
35-mm equivalent aperture = (f3.3 - f5.9) × 5.62 = f18.5 - f33.2
More comparisons of Fujifilm S3000 Z:
- Fujifilm FinePix S3000 Z vs. GE X500
- Fujifilm FinePix S3000 Z vs. Kodak EasyShare Z1485 IS
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix S7000 Zoom
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix S5100 Zoom
- Fujifilm FinePix S3000 Z vs. Fujifilm FinePix A303
- Fujifilm FinePix S3000 Z vs. Canon PowerShot SX170 IS
- Fujifilm FinePix S3000 Z vs. Sony Cyber-shot DSC-P200
- Fujifilm FinePix S3000 Z vs. Canon EOS Rebel T3
- Fujifilm FinePix S3000 Z vs. Canon EOS RP
- Fujifilm FinePix S3000 Z vs. Nikon Coolpix S6000
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.