Fujifilm FinePix S6700 vs. Olympus SP 810 UZ
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Fujifilm FinePix S6700 | Olympus SP 810 UZ | ||||
| check price » | check price » | ||||
Megapixels
16.20
14.00
Max. image resolution
4608 x 3456
4288 x 3216
Sensor
Sensor type
CMOS
CCD
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| Fujifilm FinePix S6700 | Olympus SP 810 UZ | |
Surface area:
| 28.46 mm² | vs | 28.46 mm² |
Difference: 0 mm² (0%)
S6700 and SP 810 UZ sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 2 year gap between Fujifilm S6700 (2013) and Olympus SP 810 UZ (2011).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.27 µm² (15%)
A pixel on Olympus SP 810 UZ sensor is approx. 15% bigger than a pixel on Fujifilm S6700.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Fujifilm S6700
Olympus SP 810 UZ
Total megapixels
Effective megapixels
16.20
Optical zoom
28x
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 64, 100, 200, 400, 800, 1600, 3200, 6400, 12800
Auto, 80 - 3200
RAW
Manual focus
Normal focus range
15 cm
30 cm
Macro focus range
2 cm
5 cm
Focal length (35mm equiv.)
24 - 672 mm
24 - 864 mm
Aperture priority
Yes
No
Max. aperture
f3.1 - f5.9
f2.9 - f5.7
Metering
Multi, Spot, Average
ESP Digital
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
8 sec
4 sec
Max. shutter speed
1/2000 sec
1/850 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
6
6
Screen size
3"
3.0"
Screen resolution
460,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SD/SDHC/SDXC
SDHC, SDXC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
4 x AA type alkaline batteries
Li-Ion
Weight
523 g
413 g
Dimensions
122 x 93 x 100 mm
106 x 76 x 73.5 mm
Year
2013
2011
Choose cameras to compare
Popular comparisons:
- Fujifilm FinePix S6700 vs. Fujifilm FinePix S4700
- Fujifilm FinePix S6700 vs. Panasonic Lumix DMC-FZ38
- Fujifilm FinePix S6700 vs. Fujifilm FinePix HS35 EXR
- Fujifilm FinePix S6700 vs. Olympus SP 810 UZ
- Fujifilm FinePix S6700 vs. Fujifilm FinePix S3300
- Fujifilm FinePix S6700 vs. Nikon Coolpix L810
- Fujifilm FinePix S6700 vs. Canon EOS 500D
- Fujifilm FinePix S6700 vs. Fujifilm FinePix S6500fd
- Fujifilm FinePix S6700 vs. Nikon Coolpix P510
- Fujifilm FinePix S6700 vs. Sony Cyber-shot DSC-H300
- Fujifilm FinePix S6700 vs. Nikon Coolpix L330
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Fujifilm S6700 diagonal
The diagonal of S6700 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Olympus SP 810 UZ diagonal
The diagonal of SP 810 UZ sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
S6700 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
SP 810 UZ sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
S6700 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4642 pixels
Sensor resolution width = 4642 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.33 µm |
| 4642 |
SP 810 UZ pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4315 pixels
Sensor resolution width = 4315 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.43 µm |
| 4315 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
S6700 pixel area
Pixel pitch = 1.33 µm
Pixel area = 1.33² = 1.77 µm²
Pixel area = 1.33² = 1.77 µm²
SP 810 UZ pixel area
Pixel pitch = 1.43 µm
Pixel area = 1.43² = 2.04 µm²
Pixel area = 1.43² = 2.04 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
S6700 pixel density
Sensor resolution width = 4642 pixels
Sensor width = 0.616 cm
Pixel density = (4642 / 0.616)² / 1000000 = 56.79 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4642 / 0.616)² / 1000000 = 56.79 MP/cm²
SP 810 UZ pixel density
Sensor resolution width = 4315 pixels
Sensor width = 0.616 cm
Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4315 / 0.616)² / 1000000 = 49.07 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
S6700 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.20
Resolution horizontal: X × r = 3490 × 1.33 = 4642
Resolution vertical: X = 3490
Sensor resolution = 4642 x 3490
Sensor height = 4.62 mm
Effective megapixels = 16.20
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3490
Sensor resolution = 4642 x 3490
SP 810 UZ sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 14.00
Resolution horizontal: X × r = 3244 × 1.33 = 4315
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
Sensor height = 4.62 mm
Effective megapixels = 14.00
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3244
Sensor resolution = 4315 x 3244
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
S6700 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
SP 810 UZ crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
S6700 equivalent aperture
Crop factor = 5.62
Aperture = f3.1 - f5.9
35-mm equivalent aperture = (f3.1 - f5.9) × 5.62 = f17.4 - f33.2
Aperture = f3.1 - f5.9
35-mm equivalent aperture = (f3.1 - f5.9) × 5.62 = f17.4 - f33.2
SP 810 UZ equivalent aperture
Crop factor = 5.62
Aperture = f2.9 - f5.7
35-mm equivalent aperture = (f2.9 - f5.7) × 5.62 = f16.3 - f32
Aperture = f2.9 - f5.7
35-mm equivalent aperture = (f2.9 - f5.7) × 5.62 = f16.3 - f32
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.