Fujifilm FinePix X100 vs. Olympus OM-D E-M5

Comparison

change cameras »
FinePix X100 image
vs
OM-D E-M5 image
Fujifilm FinePix X100 Olympus OM-D E-M5
check price » check price »
Megapixels
12.30
16.10
Max. image resolution
4288 x 2848
4608 x 3456

Sensor

Sensor type
CMOS
CMOS
Sensor size
23.6 x 15.8 mm
Four Thirds (17.3 x 13 mm)
Sensor resolution
4281 x 2873
4627 x 3479
Diagonal
28.40 mm
21.64 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1.66 : 1
(ratio)
Fujifilm FinePix X100 Olympus OM-D E-M5
Surface area:
372.88 mm² vs 224.90 mm²
Difference: 147.98 mm² (66%)
X100 sensor is approx. 1.66x bigger than OM-D E-M5 sensor.
Note: You are comparing cameras of different generations. There is a 2 year gap between Fujifilm X100 (2010) and Olympus OM-D E-M5 (2012). All things being equal, newer sensor generations generally outperform the older.
Pixel pitch
5.51 µm
3.74 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 1.77 µm (47%)
Pixel pitch of X100 is approx. 47% higher than pixel pitch of OM-D E-M5.
Pixel area
30.36 µm²
13.99 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 16.37 µm² (117%)
A pixel on Fujifilm X100 sensor is approx. 117% bigger than a pixel on Olympus OM-D E-M5.
Pixel density
3.29 MP/cm²
7.15 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 3.86 µm (117%)
Olympus OM-D E-M5 has approx. 117% higher pixel density than Fujifilm X100.
To learn about the accuracy of these numbers, click here.



Specs

Fujifilm X100
Olympus OM-D E-M5
Crop factor
1.52
2
Total megapixels
17.20
Effective megapixels
12.30
16.10
Optical zoom
1x
Digital zoom
Yes
No
ISO sensitivity
Auto, 200, 400, 800, 1600, 3200, 6400 (expandable to 100-12800)
Auto, (200 - 25600), 200, 400, 800, 1600, 3200, 6400, 12800, 25600
RAW
Manual focus
Normal focus range
80 cm
Macro focus range
10 cm
Focal length (35mm equiv.)
35 mm
Aperture priority
Yes
Yes
Max. aperture
f2.0
Max. aperture (35mm equiv.)
f3
n/a
Metering
Centre weighted, Multi-pattern, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV, 1/2 EV, 1 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
60 sec
Max. shutter speed
1/4000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Electronic and Optical (tunnel)
Electronic
White balance presets
7
12
Screen size
2.8"
3"
Screen resolution
460,000 dots
610,000 dots
Video capture
Max. video resolution
1280x720 (24p)
Storage types
SDHC, SDXC, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion NP-95 rechargeable battery
Lithium-Ion BLN-1 rechargeable battery
Weight
445 g
425 g
Dimensions
127 x 75 x 54 mm
121.0 x 89.6 x 41.9 mm
Year
2010
2012




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Fujifilm X100 diagonal

w = 23.60 mm
h = 15.80 mm
Diagonal =  23.60² + 15.80²   = 28.40 mm

Olympus OM-D E-M5 diagonal

w = 17.30 mm
h = 13.00 mm
Diagonal =  17.30² + 13.00²   = 21.64 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

X100 sensor area

Width = 23.60 mm
Height = 15.80 mm

Surface area = 23.60 × 15.80 = 372.88 mm²

OM-D E-M5 sensor area

Width = 17.30 mm
Height = 13.00 mm

Surface area = 17.30 × 13.00 = 224.90 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

X100 pixel pitch

Sensor width = 23.60 mm
Sensor resolution width = 4281 pixels
Pixel pitch =   23.60  × 1000  = 5.51 µm
4281

OM-D E-M5 pixel pitch

Sensor width = 17.30 mm
Sensor resolution width = 4627 pixels
Pixel pitch =   17.30  × 1000  = 3.74 µm
4627


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

X100 pixel area

Pixel pitch = 5.51 µm

Pixel area = 5.51² = 30.36 µm²

OM-D E-M5 pixel area

Pixel pitch = 3.74 µm

Pixel area = 3.74² = 13.99 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

X100 pixel density

Sensor resolution width = 4281 pixels
Sensor width = 2.36 cm

Pixel density = (4281 / 2.36)² / 1000000 = 3.29 MP/cm²

OM-D E-M5 pixel density

Sensor resolution width = 4627 pixels
Sensor width = 1.73 cm

Pixel density = (4627 / 1.73)² / 1000000 = 7.15 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

X100 sensor resolution

Sensor width = 23.60 mm
Sensor height = 15.80 mm
Effective megapixels = 12.30
r = 23.60/15.80 = 1.49
X =  12.30 × 1000000  = 2873
1.49
Resolution horizontal: X × r = 2873 × 1.49 = 4281
Resolution vertical: X = 2873

Sensor resolution = 4281 x 2873

OM-D E-M5 sensor resolution

Sensor width = 17.30 mm
Sensor height = 13.00 mm
Effective megapixels = 16.10
r = 17.30/13.00 = 1.33
X =  16.10 × 1000000  = 3479
1.33
Resolution horizontal: X × r = 3479 × 1.33 = 4627
Resolution vertical: X = 3479

Sensor resolution = 4627 x 3479


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


X100 crop factor

Sensor diagonal in mm = 28.40 mm
Crop factor =   43.27  = 1.52
28.40

OM-D E-M5 crop factor

Sensor diagonal in mm = 21.64 mm
Crop factor =   43.27  = 2
21.64

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

X100 equivalent aperture

Crop factor = 1.52
Aperture = f2.0

35-mm equivalent aperture = (f2.0) × 1.52 = f3

OM-D E-M5 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Olympus OM-D E-M5, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Olympus OM-D E-M5 is 2

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.