Fujifilm X-S10 vs. Fujifilm X100V

Comparison

change cameras »

Fujifilm X-S10

Fujifilm X100V

check price »

Megapixels

26.10

Max. image resolution

6240 x 4160

Sensor

Sensor type

CMOS

Sensor size

23.5 x 15.6 mm

Sensor resolution

6277 x 4157

Diagonal

28.21 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	1
(ratio)

Fujifilm X-S10		Fujifilm X100V

Surface area:

366.60 mm²

Difference: 0 mm² (0%)

X-S10 and X100V sensors are the same size.

Pixel pitch

3.74 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 0 µm (0%)

X-S10 and X100V have the same pixel pitch.

Pixel area

13.99 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 0 µm² (0%)

Fujifilm X-S10 and Fujifilm X100V have the same pixel area.

Pixel density

7.13 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 0 µm (0%)

Fujifilm X-S10 and Fujifilm X100V have the same pixel density.

To learn about the accuracy of these numbers, click here.

Specs

Fujifilm X-S10

Fujifilm X100V

Crop factor

1.53

Total megapixels

Effective megapixels

26.10

Optical zoom

Digital zoom

Yes

ISO sensitivity

Auto, 160-12800 (extends to 80-51200)

Auto, 160-12800 (expandable to 80-51200)

RAW

Manual focus

Normal focus range

80 cm

Macro focus range

10 cm

Focal length (35mm equiv.)

35 mm

Aperture priority

Yes

Max. aperture

f2.0

Max. aperture (35mm equiv.)

n/a

f3.1

Metering

Multi, Center-weighted, Average, Spot

Exposure compensation

±5 EV (in 1/3 EV steps)

Shutter priority

Yes

Min. shutter speed

900 sec

30 sec

Max. shutter speed

1/4000 sec

1/32000 sec

Built-in flash

External flash

Viewfinder

Electronic

Electronic and Optical (tunnel)

White balance presets

Screen size

Screen resolution

1,040,000 dots

1,620,000 dots

Video capture

Max. video resolution

4096x2160 (30p/25p/24p)

Storage types

SD/SDHC/SDXC

USB

USB 3.0 (5 GBit/sec)

HDMI

Wireless

GPS

Battery

NP-W126S Li-ion battery

NP-W126S lithium-ion battery

Weight

465 g

478 g

Dimensions

126 x 85.1 x 65.4 mm

128 x 74.8 x 53.3 mm

Year

2020

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Fujifilm X-S10 diagonal

w = 23.50 mm
h = 15.60 mm

Diagonal = √

23.50² + 15.60²

= 28.21 mm

Fujifilm X100V diagonal

w = 23.50 mm
h = 15.60 mm

Diagonal = √

23.50² + 15.60²

= 28.21 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

X-S10 sensor area

Width = 23.50 mm
Height = 15.60 mm

Surface area = 23.50 × 15.60 = 366.60 mm²

X100V sensor area

Width = 23.50 mm
Height = 15.60 mm

Surface area = 23.50 × 15.60 = 366.60 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

X-S10 pixel pitch

Sensor width = 23.50 mm
Sensor resolution width = 6277 pixels

Pixel pitch =	23.50	× 1000	= 3.74 µm
	6277

X100V pixel pitch

Sensor width = 23.50 mm
Sensor resolution width = 6277 pixels

Pixel pitch =	23.50	× 1000	= 3.74 µm
	6277

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

X-S10 pixel area

Pixel pitch = 3.74 µm

Pixel area = 3.74² = 13.99 µm²

X100V pixel area

Pixel pitch = 3.74 µm

Pixel area = 3.74² = 13.99 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

X-S10 pixel density

Sensor resolution width = 6277 pixels
Sensor width = 2.35 cm

Pixel density = (6277 / 2.35)² / 1000000 = 7.13 MP/cm²

X100V pixel density

Sensor resolution width = 6277 pixels
Sensor width = 2.35 cm

Pixel density = (6277 / 2.35)² / 1000000 = 7.13 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

X-S10 sensor resolution

Sensor width = 23.50 mm
Sensor height = 15.60 mm
Effective megapixels = 26.10

r = 23.50/15.60 = 1.51

X = √	26.10 × 1000000	= 4157
	1.51

Resolution horizontal: X × r = 4157 × 1.51 = 6277
Resolution vertical: X = 4157

Sensor resolution = 6277 x 4157

X100V sensor resolution

Sensor width = 23.50 mm
Sensor height = 15.60 mm
Effective megapixels = 26.10

r = 23.50/15.60 = 1.51

X = √	26.10 × 1000000	= 4157
	1.51

Resolution horizontal: X × r = 4157 × 1.51 = 6277
Resolution vertical: X = 4157

Sensor resolution = 6277 x 4157

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

X-S10 crop factor

Sensor diagonal in mm = 28.21 mm

Crop factor =	43.27	= 1.53
	28.21

X100V crop factor

Sensor diagonal in mm = 28.21 mm

Crop factor =	43.27	= 1.53
	28.21

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

X-S10 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Fujifilm X-S10, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Fujifilm X-S10 is 1.53

X100V equivalent aperture

Crop factor = 1.53
Aperture = f2.0

35-mm equivalent aperture = (f2.0) × 1.53 = f3.1

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.