GE E1410SW vs. GE X600
Comparison
| change cameras » | |||||
|
vs |
|
|||
| GE E1410SW | GE X600 | ||||
| check price » | check price » | ||||
Megapixels
14.40
14.41
Max. image resolution
4320 x 3240
4320 x 3240
Sensor
Sensor type
CMOS
CMOS
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| GE E1410SW | GE X600 | |
Surface area:
| 28.46 mm² | vs | 28.46 mm² |
Difference: 0 mm² (0%)
E1410SW and X600 sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0 µm² (0%)
GE E1410SW and GE X600 have the same pixel area.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
GE E1410SW
GE X600
Total megapixels
15.40
Effective megapixels
14.41
Optical zoom
Yes
Digital zoom
Yes
ISO sensitivity
Auto
Auto, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
28 - 280 mm
Aperture priority
No
Max. aperture
f3.2 - f5.6
Metering
Exposure compensation
±2 EV (in 1/3 EV steps)
Shutter priority
No
Min. shutter speed
Max. shutter speed
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
Screen size
2.7"
Screen resolution
230,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
Weight
Dimensions
Year
2012
2012
Choose cameras to compare
Popular comparisons:
- GE E1410SW vs. GE E1480W
- GE E1410SW vs. Kodak EasyShare C143
- GE E1410SW vs. Nikon Coolpix P300
- GE E1410SW vs. Kodak EasyShare C1013
- GE E1410SW vs. Kodak EasyShare M580
- GE E1410SW vs. Panasonic Lumix DMC-LX3
- GE E1410SW vs. Kodak EasyShare V1273
- GE E1410SW vs. GE J1458W
- GE E1410SW vs. GE X600
- GE E1410SW vs. Ricoh Caplio R5
- Canon EOS 200D vs. Canon EOS 750D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
GE E1410SW diagonal
The diagonal of E1410SW sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
GE X600 diagonal
The diagonal of X600 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
E1410SW sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
X600 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
E1410SW pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4376 pixels
Sensor resolution width = 4376 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.41 µm |
| 4376 |
X600 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4378 pixels
Sensor resolution width = 4378 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.41 µm |
| 4378 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
E1410SW pixel area
Pixel pitch = 1.41 µm
Pixel area = 1.41² = 1.99 µm²
Pixel area = 1.41² = 1.99 µm²
X600 pixel area
Pixel pitch = 1.41 µm
Pixel area = 1.41² = 1.99 µm²
Pixel area = 1.41² = 1.99 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
E1410SW pixel density
Sensor resolution width = 4376 pixels
Sensor width = 0.616 cm
Pixel density = (4376 / 0.616)² / 1000000 = 50.47 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4376 / 0.616)² / 1000000 = 50.47 MP/cm²
X600 pixel density
Sensor resolution width = 4378 pixels
Sensor width = 0.616 cm
Pixel density = (4378 / 0.616)² / 1000000 = 50.51 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4378 / 0.616)² / 1000000 = 50.51 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
E1410SW sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 14.40
Resolution horizontal: X × r = 3290 × 1.33 = 4376
Resolution vertical: X = 3290
Sensor resolution = 4376 x 3290
Sensor height = 4.62 mm
Effective megapixels = 14.40
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3290
Sensor resolution = 4376 x 3290
X600 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 14.41
Resolution horizontal: X × r = 3292 × 1.33 = 4378
Resolution vertical: X = 3292
Sensor resolution = 4378 x 3292
Sensor height = 4.62 mm
Effective megapixels = 14.41
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3292
Sensor resolution = 4378 x 3292
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
E1410SW crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
X600 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
E1410SW equivalent aperture
Crop factor = 5.62
Aperture = f3.2 - f5.6
35-mm equivalent aperture = (f3.2 - f5.6) × 5.62 = f18 - f31.5
Aperture = f3.2 - f5.6
35-mm equivalent aperture = (f3.2 - f5.6) × 5.62 = f18 - f31.5
X600 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
GE X600, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for GE X600 is 5.62
Crop factor for GE X600 is 5.62
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.