HP Photosmart C200 vs. HP Photosmart C20

Comparison

change cameras »
Photosmart C200 image
vs
Photosmart C20 image
HP Photosmart C200 HP Photosmart C20
check price » check price »
Megapixels
1.00
1.00
Max. image resolution
1152 x 872
1152 x 872

Sensor

Sensor type
CCD
CCD
Sensor size
2/3" (~ 8.8 x 6.6 mm)
2/3" (~ 8.8 x 6.6 mm)
Sensor resolution
1153 x 867
1153 x 867
Diagonal
11.00 mm
11.00 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1
(ratio)
HP Photosmart C200 HP Photosmart C20
Surface area:
58.08 mm² vs 58.08 mm²
Difference: 0 mm² (0%)
C200 and C20 sensors are the same size.
Pixel pitch
7.63 µm
7.63 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0 µm (0%)
C200 and C20 have the same pixel pitch.
Pixel area
58.22 µm²
58.22 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0 µm² (0%)
HP C200 and HP C20 have the same pixel area.
Pixel density
1.72 MP/cm²
1.72 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 0 µm (0%)
HP C200 and HP C20 have the same pixel density.
To learn about the accuracy of these numbers, click here.



Specs

HP C200
HP C20
Crop factor
3.93
3.93
Total megapixels
Effective megapixels
Optical zoom
1x
1x
Digital zoom
Yes
No
ISO sensitivity
100
100
RAW
Manual focus
Normal focus range
60 cm
60 cm
Macro focus range
20 cm
20 cm
Focal length (35mm equiv.)
35 mm
39 mm
Aperture priority
No
No
Max. aperture
f2.8 - f5.6
f2.8 - f5.6
Max. aperture (35mm equiv.)
f11 - f22
f11 - f22
Metering
Exposure compensation
±2 EV (in 1/2 EV steps)
±2 EV (in 1/2 EV steps)
Shutter priority
No
No
Min. shutter speed
2 sec
2 sec
Max. shutter speed
1/500 sec
1/500 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
5
5
Screen size
1.8"
1.8"
Screen resolution
61,600 dots
61,600 dots
Video capture
Max. video resolution
Storage types
Compact Flash
Compact Flash
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
AA (4) batteries (NiMH recommended)
Weight
300 g
300 g
Dimensions
126 x 80 x 48 mm
127 x 89 x 48 mm
Year
1999
1998




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal = √  w² + h²
where w = sensor width and h = sensor height

HP C200 diagonal

The diagonal of C200 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of that value - 11 mm. If you want to know why, see sensor sizes.

w = 8.80 mm
h = 6.60 mm
Diagonal = √  8.80² + 6.60²   = 11.00 mm

HP C20 diagonal

The diagonal of C20 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of that value - 11 mm. If you want to know why, see sensor sizes.

w = 8.80 mm
h = 6.60 mm
Diagonal = √  8.80² + 6.60²   = 11.00 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

C200 sensor area

Width = 8.80 mm
Height = 6.60 mm

Surface area = 8.80 × 6.60 = 58.08 mm²

C20 sensor area

Width = 8.80 mm
Height = 6.60 mm

Surface area = 8.80 × 6.60 = 58.08 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

C200 pixel pitch

Sensor width = 8.80 mm
Sensor resolution width = 1153 pixels
Pixel pitch =   8.80  × 1000  = 7.63 µm
1153

C20 pixel pitch

Sensor width = 8.80 mm
Sensor resolution width = 1153 pixels
Pixel pitch =   8.80  × 1000  = 7.63 µm
1153


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

C200 pixel area

Pixel pitch = 7.63 µm

Pixel area = 7.63² = 58.22 µm²

C20 pixel area

Pixel pitch = 7.63 µm

Pixel area = 7.63² = 58.22 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

C200 pixel density

Sensor resolution width = 1153 pixels
Sensor width = 0.88 cm

Pixel density = (1153 / 0.88)² / 1000000 = 1.72 MP/cm²

C20 pixel density

Sensor resolution width = 1153 pixels
Sensor width = 0.88 cm

Pixel density = (1153 / 0.88)² / 1000000 = 1.72 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X = √  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

C200 sensor resolution

Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 1.00
r = 8.80/6.60 = 1.33
X = √  1.00 × 1000000  = 867
1.33
Resolution horizontal: X × r = 867 × 1.33 = 1153
Resolution vertical: X = 867

Sensor resolution = 1153 x 867

C20 sensor resolution

Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 1.00
r = 8.80/6.60 = 1.33
X = √  1.00 × 1000000  = 867
1.33
Resolution horizontal: X × r = 867 × 1.33 = 1153
Resolution vertical: X = 867

Sensor resolution = 1153 x 867


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


C200 crop factor

Sensor diagonal in mm = 11.00 mm
Crop factor =   43.27  = 3.93
11.00

C20 crop factor

Sensor diagonal in mm = 11.00 mm
Crop factor =   43.27  = 3.93
11.00

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

C200 equivalent aperture

Crop factor = 3.93
Aperture = f2.8 - f5.6

35-mm equivalent aperture = (f2.8 - f5.6) × 3.93 = f11 - f22

C20 equivalent aperture

Crop factor = 3.93
Aperture = f2.8 - f5.6

35-mm equivalent aperture = (f2.8 - f5.6) × 3.93 = f11 - f22

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.