JVC GC-QX5HD vs. Concord 3345z
Comparison
| change cameras » | |||||
|
vs |
|
|||
| JVC GC-QX5HD | Concord 3345z | ||||
| check price » | check price » | ||||
Megapixels
3.34
3.10
Max. image resolution
2032 x 1536
2048 x 1536
Sensor
Sensor type
CCD
CMOS
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/2" (~ 6.4 x 4.8 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.23 | : | 1 |
| (ratio) | ||
| JVC GC-QX5HD | Concord 3345z | |
Surface area:
| 37.90 mm² | vs | 30.72 mm² |
Difference: 7.18 mm² (23%)
GC-QX5HD sensor is approx. 1.23x bigger than 3345z sensor.
Note: You are comparing cameras of different generations.
There is a 3 year gap between JVC GC-QX5HD (2001) and Concord 3345z (2004).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.44 µm² (15%)
A pixel on JVC GC-QX5HD sensor is approx. 15% bigger than a pixel on Concord 3345z.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
JVC GC-QX5HD
Concord 3345z
Total megapixels
Effective megapixels
Optical zoom
Yes
Yes
Digital zoom
Yes
Yes
ISO sensitivity
80, 160, 320
Auto, 100, 200, 400
RAW
Manual focus
Normal focus range
50 cm
60 cm
Macro focus range
2 cm
15 cm
Focal length (35mm equiv.)
37 - 86 mm
38 - 114 mm
Aperture priority
Yes
No
Max. aperture
f2.8 - f3.8
f2.8 - f4.7
Metering
Matrix, Spot
Matrix, Spot
Exposure compensation
±2 EV (in 1/2 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
1/4 sec
1 sec
Max. shutter speed
1/750 sec
1/1000 sec
Built-in flash
External flash
Viewfinder
Optical
Optical
White balance presets
4
Screen size
2"
1.5"
Screen resolution
200,000 dots
61,600 dots
Video capture
Max. video resolution
Storage types
SmartMedia
Secure Digital
USB
USB 1.1
USB 1.1
HDMI
Wireless
GPS
Battery
Li-Ion
2x AA
Weight
290 g
159 g
Dimensions
111 x 67 x 59 mm
100 x 61 x 31.5 mm
Year
2001
2004
Choose cameras to compare
Popular comparisons:
- JVC GC-QX5HD vs. Fujifilm FinePix HS50 EXR
- JVC GC-QX5HD vs. Sony Alpha a6400
- JVC GC-QX5HD vs. Nikon D3200
- JVC GC-QX5HD vs. Nikon D5200
- JVC GC-QX5HD vs. Nikon D5100
- JVC GC-QX5HD vs. Pentax EI-100
- JVC GC-QX5HD vs. Samsung NX300
- JVC GC-QX5HD vs. Concord 3345z
- JVC GC-QX5HD vs. Panasonic Lumix DMC-TZ57
- JVC GC-QX5HD vs. JVC GC-QX3HD
- JVC GC-QX5HD vs. Panasonic Lumix DMC-F1
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
JVC GC-QX5HD diagonal
The diagonal of GC-QX5HD sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Concord 3345z diagonal
The diagonal of 3345z sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
GC-QX5HD sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
3345z sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
GC-QX5HD pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2108 pixels
Sensor resolution width = 2108 pixels
| Pixel pitch = | 7.11 | × 1000 | = 3.37 µm |
| 2108 |
3345z pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 2031 pixels
Sensor resolution width = 2031 pixels
| Pixel pitch = | 6.40 | × 1000 | = 3.15 µm |
| 2031 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
GC-QX5HD pixel area
Pixel pitch = 3.37 µm
Pixel area = 3.37² = 11.36 µm²
Pixel area = 3.37² = 11.36 µm²
3345z pixel area
Pixel pitch = 3.15 µm
Pixel area = 3.15² = 9.92 µm²
Pixel area = 3.15² = 9.92 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
GC-QX5HD pixel density
Sensor resolution width = 2108 pixels
Sensor width = 0.711 cm
Pixel density = (2108 / 0.711)² / 1000000 = 8.79 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2108 / 0.711)² / 1000000 = 8.79 MP/cm²
3345z pixel density
Sensor resolution width = 2031 pixels
Sensor width = 0.64 cm
Pixel density = (2031 / 0.64)² / 1000000 = 10.07 MP/cm²
Sensor width = 0.64 cm
Pixel density = (2031 / 0.64)² / 1000000 = 10.07 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
GC-QX5HD sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 3.34
Resolution horizontal: X × r = 1585 × 1.33 = 2108
Resolution vertical: X = 1585
Sensor resolution = 2108 x 1585
Sensor height = 5.33 mm
Effective megapixels = 3.34
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1585
Sensor resolution = 2108 x 1585
3345z sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 3.10
Resolution horizontal: X × r = 1527 × 1.33 = 2031
Resolution vertical: X = 1527
Sensor resolution = 2031 x 1527
Sensor height = 4.80 mm
Effective megapixels = 3.10
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 1527
Sensor resolution = 2031 x 1527
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
GC-QX5HD crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
3345z crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
GC-QX5HD equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f3.8
35-mm equivalent aperture = (f2.8 - f3.8) × 4.87 = f13.6 - f18.5
Aperture = f2.8 - f3.8
35-mm equivalent aperture = (f2.8 - f3.8) × 4.87 = f13.6 - f18.5
3345z equivalent aperture
Crop factor = 5.41
Aperture = f2.8 - f4.7
35-mm equivalent aperture = (f2.8 - f4.7) × 5.41 = f15.1 - f25.4
Aperture = f2.8 - f4.7
35-mm equivalent aperture = (f2.8 - f4.7) × 5.41 = f15.1 - f25.4
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.