Kodak DC265 vs. Kodak DC260
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Kodak DC265 | Kodak DC260 | ||||
| check price » | check price » | ||||
Megapixels
1.50
1.50
Max. image resolution
1536 x 1024
1536 x 1024
Sensor
Sensor type
CCD
CCD
Sensor size
1/1.76" (~ 7.27 x 5.46 mm)
1/1.76" (~ 7.27 x 5.46 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| Kodak DC265 | Kodak DC260 | |
Surface area:
| 39.69 mm² | vs | 39.69 mm² |
Difference: 0 mm² (0%)
DC265 and DC260 sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0 µm² (0%)
Kodak DC265 and Kodak DC260 have the same pixel area.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Kodak DC265
Kodak DC260
Total megapixels
1.60
1.60
Effective megapixels
1.50
1.50
Optical zoom
3x
3x
Digital zoom
Yes
Yes
ISO sensitivity
100
100
RAW
Manual focus
Normal focus range
30 cm
30 cm
Macro focus range
30 cm
20 cm
Focal length (35mm equiv.)
38 - 115 mm
38 - 115 mm
Aperture priority
No
No
Max. aperture
f3 - f4.7
f3.0 - f14.0
Metering
Centre weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/2 EV steps)
Shutter priority
No
No
Min. shutter speed
1/4 sec
1/4 sec
Max. shutter speed
1/400 sec
1/400 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
5
5
Screen size
2"
2"
Screen resolution
110,000 dots
72,000 dots
Video capture
Max. video resolution
Storage types
CompactFlash type I
Compact Flash
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
AA NiMH (4) batteries included
AA (4) batteries (NiMH recommended)
Weight
540 g
550 g
Dimensions
118 x 106 x 57 mm
118 x 57 x 106 mm
Year
1999
1998
Choose cameras to compare
Popular comparisons:
- Kodak DC265 vs. Kodak DC260
- Kodak DC265 vs. Toshiba PDR M700
- Kodak DC265 vs. Sony Cyber-shot DSC-S70
- Kodak DC265 vs. Kodak DC210 plus
- Kodak DC265 vs. Kodak DC4800
- Kodak DC265 vs. Canon PowerShot SX120 IS
- Kodak DC265 vs. Kodak PixPro AZ651
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Kodak DC265 diagonal
The diagonal of DC265 sensor is not 1/1.76 or 0.57" (14.4 mm) as you might expect, but approximately two thirds of
that value - 9.09 mm. If you want to know why, see
sensor sizes.
w = 7.27 mm
h = 5.46 mm
w = 7.27 mm
h = 5.46 mm
| Diagonal = √ | 7.27² + 5.46² | = 9.09 mm |
Kodak DC260 diagonal
The diagonal of DC260 sensor is not 1/1.76 or 0.57" (14.4 mm) as you might expect, but approximately two thirds of
that value - 9.09 mm. If you want to know why, see
sensor sizes.
w = 7.27 mm
h = 5.46 mm
w = 7.27 mm
h = 5.46 mm
| Diagonal = √ | 7.27² + 5.46² | = 9.09 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DC265 sensor area
Width = 7.27 mm
Height = 5.46 mm
Surface area = 7.27 × 5.46 = 39.69 mm²
Height = 5.46 mm
Surface area = 7.27 × 5.46 = 39.69 mm²
DC260 sensor area
Width = 7.27 mm
Height = 5.46 mm
Surface area = 7.27 × 5.46 = 39.69 mm²
Height = 5.46 mm
Surface area = 7.27 × 5.46 = 39.69 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
DC265 pixel pitch
Sensor width = 7.27 mm
Sensor resolution width = 1412 pixels
Sensor resolution width = 1412 pixels
| Pixel pitch = | 7.27 | × 1000 | = 5.15 µm |
| 1412 |
DC260 pixel pitch
Sensor width = 7.27 mm
Sensor resolution width = 1412 pixels
Sensor resolution width = 1412 pixels
| Pixel pitch = | 7.27 | × 1000 | = 5.15 µm |
| 1412 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
DC265 pixel area
Pixel pitch = 5.15 µm
Pixel area = 5.15² = 26.52 µm²
Pixel area = 5.15² = 26.52 µm²
DC260 pixel area
Pixel pitch = 5.15 µm
Pixel area = 5.15² = 26.52 µm²
Pixel area = 5.15² = 26.52 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
DC265 pixel density
Sensor resolution width = 1412 pixels
Sensor width = 0.727 cm
Pixel density = (1412 / 0.727)² / 1000000 = 3.77 MP/cm²
Sensor width = 0.727 cm
Pixel density = (1412 / 0.727)² / 1000000 = 3.77 MP/cm²
DC260 pixel density
Sensor resolution width = 1412 pixels
Sensor width = 0.727 cm
Pixel density = (1412 / 0.727)² / 1000000 = 3.77 MP/cm²
Sensor width = 0.727 cm
Pixel density = (1412 / 0.727)² / 1000000 = 3.77 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DC265 sensor resolution
Sensor width = 7.27 mm
Sensor height = 5.46 mm
Effective megapixels = 1.50
Resolution horizontal: X × r = 1062 × 1.33 = 1412
Resolution vertical: X = 1062
Sensor resolution = 1412 x 1062
Sensor height = 5.46 mm
Effective megapixels = 1.50
| r = 7.27/5.46 = 1.33 |
|
Resolution vertical: X = 1062
Sensor resolution = 1412 x 1062
DC260 sensor resolution
Sensor width = 7.27 mm
Sensor height = 5.46 mm
Effective megapixels = 1.50
Resolution horizontal: X × r = 1062 × 1.33 = 1412
Resolution vertical: X = 1062
Sensor resolution = 1412 x 1062
Sensor height = 5.46 mm
Effective megapixels = 1.50
| r = 7.27/5.46 = 1.33 |
|
Resolution vertical: X = 1062
Sensor resolution = 1412 x 1062
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
DC265 crop factor
Sensor diagonal in mm = 9.09 mm
| Crop factor = | 43.27 | = 4.76 |
| 9.09 |
DC260 crop factor
Sensor diagonal in mm = 9.09 mm
| Crop factor = | 43.27 | = 4.76 |
| 9.09 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DC265 equivalent aperture
Crop factor = 4.76
Aperture = f3 - f4.7
35-mm equivalent aperture = (f3 - f4.7) × 4.76 = f14.3 - f22.4
Aperture = f3 - f4.7
35-mm equivalent aperture = (f3 - f4.7) × 4.76 = f14.3 - f22.4
DC260 equivalent aperture
Crop factor = 4.76
Aperture = f3.0 - f14.0
35-mm equivalent aperture = (f3.0 - f14.0) × 4.76 = f14.3 - f66.6
Aperture = f3.0 - f14.0
35-mm equivalent aperture = (f3.0 - f14.0) × 4.76 = f14.3 - f66.6
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.