Kodak EasyShare CD93 vs. Kodak PixPro S-1
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Kodak EasyShare CD93 | Kodak PixPro S-1 | ||||
| check price » | check price » | ||||
Megapixels
9.50
16.83
Max. image resolution
3472 x 2604
4640 x 3480
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
Four Thirds (17.3 x 13 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 9.05 |
| (ratio) | ||
| Kodak EasyShare CD93 | Kodak PixPro S-1 | |
Surface area:
| 24.84 mm² | vs | 224.90 mm² |
Difference: 200.06 mm² (805%)
S-1 sensor is approx. 9.05x bigger than CD93 sensor.
Note: You are comparing cameras of different generations.
There is a 5 year gap between Kodak CD93 (2009) and Kodak S-1 (2014).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 10.78 µm² (411%)
A pixel on Kodak S-1 sensor is approx. 411% bigger than a pixel on Kodak CD93.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Kodak CD93
Kodak S-1
Total megapixels
Effective megapixels
16.83
Optical zoom
Yes
Digital zoom
Yes
ISO sensitivity
Auto, 64, 80, 100, 160, 200, 400, 800, 1000
Auto, 200-12800
RAW
Manual focus
Normal focus range
60 cm
Macro focus range
13 cm
Focal length (35mm equiv.)
36 - 108 mm
Aperture priority
No
Yes
Max. aperture
f2.7 - f4.8
Metering
Centre weighted, Multi-pattern, TTL-AE
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/2 EV steps)
±3 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
1/2 sec
30 sec
Max. shutter speed
1/1400 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
5
6
Screen size
2.4"
3"
Screen resolution
115,000 dots
920,000 dots
Video capture
Max. video resolution
1920x1080 (30p)
Storage types
SDHC, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
2x AA
Rechargeable Li-ion Battery LB-070
Weight
137 g
290 g
Dimensions
91.1 x 62.2 x 25.3 mm
115.7 x 67.4 x 35.6 mm
Year
2009
2014
Choose cameras to compare
Popular comparisons:
- Kodak EasyShare CD93 vs. Kodak PixPro S-1
- Kodak EasyShare CD93 vs. Kodak EasyShare C613
- Kodak EasyShare CD93 vs. Sony Cyber-shot DSC-RX1R
- Kodak EasyShare CD93 vs. Kodak EasyShare CX4200
- Kodak EasyShare CD93 vs. Sony Cyber-shot DSC-WX7
- Kodak EasyShare CD93 vs. Kodak EasyShare C360
- Kodak EasyShare CD93 vs. Panasonic Lumix DMC-SZ7
- Kodak EasyShare CD93 vs. Nikon Coolpix S600
- Kodak EasyShare CD93 vs. Sony Cyber-shot DSC-S930
- Kodak EasyShare CD93 vs. Sony Cyber-shot DSC-W7
- Kodak EasyShare CD93 vs. Olympus C-740 UZ
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Kodak CD93 diagonal
The diagonal of CD93 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Kodak S-1 diagonal
w = 17.30 mm
h = 13.00 mm
h = 13.00 mm
| Diagonal = √ | 17.30² + 13.00² | = 21.64 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
CD93 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
S-1 sensor area
Width = 17.30 mm
Height = 13.00 mm
Surface area = 17.30 × 13.00 = 224.90 mm²
Height = 13.00 mm
Surface area = 17.30 × 13.00 = 224.90 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
CD93 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3555 pixels
Sensor resolution width = 3555 pixels
| Pixel pitch = | 5.75 | × 1000 | = 1.62 µm |
| 3555 |
S-1 pixel pitch
Sensor width = 17.30 mm
Sensor resolution width = 4731 pixels
Sensor resolution width = 4731 pixels
| Pixel pitch = | 17.30 | × 1000 | = 3.66 µm |
| 4731 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
CD93 pixel area
Pixel pitch = 1.62 µm
Pixel area = 1.62² = 2.62 µm²
Pixel area = 1.62² = 2.62 µm²
S-1 pixel area
Pixel pitch = 3.66 µm
Pixel area = 3.66² = 13.4 µm²
Pixel area = 3.66² = 13.4 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
CD93 pixel density
Sensor resolution width = 3555 pixels
Sensor width = 0.575 cm
Pixel density = (3555 / 0.575)² / 1000000 = 38.22 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3555 / 0.575)² / 1000000 = 38.22 MP/cm²
S-1 pixel density
Sensor resolution width = 4731 pixels
Sensor width = 1.73 cm
Pixel density = (4731 / 1.73)² / 1000000 = 7.48 MP/cm²
Sensor width = 1.73 cm
Pixel density = (4731 / 1.73)² / 1000000 = 7.48 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
CD93 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 9.50
Resolution horizontal: X × r = 2673 × 1.33 = 3555
Resolution vertical: X = 2673
Sensor resolution = 3555 x 2673
Sensor height = 4.32 mm
Effective megapixels = 9.50
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2673
Sensor resolution = 3555 x 2673
S-1 sensor resolution
Sensor width = 17.30 mm
Sensor height = 13.00 mm
Effective megapixels = 16.83
Resolution horizontal: X × r = 3557 × 1.33 = 4731
Resolution vertical: X = 3557
Sensor resolution = 4731 x 3557
Sensor height = 13.00 mm
Effective megapixels = 16.83
| r = 17.30/13.00 = 1.33 |
|
Resolution vertical: X = 3557
Sensor resolution = 4731 x 3557
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
CD93 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
S-1 crop factor
Sensor diagonal in mm = 21.64 mm
| Crop factor = | 43.27 | = 2 |
| 21.64 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
CD93 equivalent aperture
Crop factor = 6.02
Aperture = f2.7 - f4.8
35-mm equivalent aperture = (f2.7 - f4.8) × 6.02 = f16.3 - f28.9
Aperture = f2.7 - f4.8
35-mm equivalent aperture = (f2.7 - f4.8) × 6.02 = f16.3 - f28.9
S-1 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Kodak S-1, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Kodak S-1 is 2
Crop factor for Kodak S-1 is 2
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.