Kodak EasyShare M1033 vs. Kodak EasyShare V1073

Comparison

change cameras »

Kodak EasyShare M1033

Kodak EasyShare V1073

check price »

Megapixels

10.10

11.10

Max. image resolution

3648 x 2736

Sensor

Sensor type

CCD

Sensor size

1/2.3" (~ 6.16 x 4.62 mm)

1/1.63" (~ 7.85 x 5.89 mm)

Sensor resolution

3665 x 2756

3842 x 2889

Diagonal

7.70 mm

9.81 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1	:	1.62
(ratio)

Kodak EasyShare M1033		Kodak EasyShare V1073

Surface area:

28.46 mm²

46.24 mm²

Difference: 17.78 mm² (62%)

V1073 sensor is approx. 1.62x bigger than M1033 sensor.

Pixel pitch

1.68 µm

2.04 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 0.36 µm (21%)

Pixel pitch of V1073 is approx. 21% higher than pixel pitch of M1033.

Pixel area

2.82 µm²

4.16 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 1.34 µm² (48%)

A pixel on Kodak V1073 sensor is approx. 48% bigger than a pixel on Kodak M1033.

Pixel density

35.4 MP/cm²

23.95 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 11.45 µm (48%)

Kodak M1033 has approx. 48% higher pixel density than Kodak V1073.

To learn about the accuracy of these numbers, click here.

Specs

Kodak M1033

Kodak V1073

Crop factor

5.62

4.41

Total megapixels

10.30

11.30

Effective megapixels

10.10

11.10

Optical zoom

Digital zoom

Yes

ISO sensitivity

Auto, 64, 100, 200, 400, 800, 1600, 3200, (6400 at 3.1 MP)

Auto, 80, 100, 200, 400, 800, 1600, 3200

RAW

Manual focus

Normal focus range

60 cm

Macro focus range

7 cm

13 cm

Focal length (35mm equiv.)

35 - 105 mm

37 - 111 mm

Aperture priority

Max. aperture

f3.1 - f5.7

Max. aperture (35mm equiv.)

f17.4 - f32

f13.7 - f25.1

Metering

Multi, Center-weighted, Spot

Centre weighted, Multi-pattern, Spot

Exposure compensation

±2 EV (in 1/3 EV steps)

Shutter priority

Min. shutter speed

8 sec

Max. shutter speed

1/1448 sec

1/1164 sec

Built-in flash

External flash

Viewfinder

None

White balance presets

Screen size

Screen resolution

230,000 dots

Video capture

Max. video resolution

Storage types

SD/SDHC/MMC card, Internal

SDHC, Secure Digital

USB

USB 2.0 (480 Mbit/sec)

HDMI

Wireless

GPS

Battery

Kodak KLIC-7004 Lithium-Ion,

Weight

166 g

188 g

Dimensions

94 x 58 x 21 mm

93 x 58 x 21 mm

Year

2008

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Kodak M1033 diagonal

The diagonal of M1033 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm

Diagonal = √

6.16² + 4.62²

= 7.70 mm

Kodak V1073 diagonal

The diagonal of V1073 sensor is not 1/1.63 or 0.61" (15.6 mm) as you might expect, but approximately two thirds of that value - 9.81 mm. If you want to know why, see sensor sizes.

w = 7.85 mm
h = 5.89 mm

Diagonal = √

7.85² + 5.89²

= 9.81 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

M1033 sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²

V1073 sensor area

Width = 7.85 mm
Height = 5.89 mm

Surface area = 7.85 × 5.89 = 46.24 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

M1033 pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 3665 pixels

Pixel pitch =	6.16	× 1000	= 1.68 µm
	3665

V1073 pixel pitch

Sensor width = 7.85 mm
Sensor resolution width = 3842 pixels

Pixel pitch =	7.85	× 1000	= 2.04 µm
	3842

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

M1033 pixel area

Pixel pitch = 1.68 µm

Pixel area = 1.68² = 2.82 µm²

V1073 pixel area

Pixel pitch = 2.04 µm

Pixel area = 2.04² = 4.16 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

M1033 pixel density

Sensor resolution width = 3665 pixels
Sensor width = 0.616 cm

Pixel density = (3665 / 0.616)² / 1000000 = 35.4 MP/cm²

V1073 pixel density

Sensor resolution width = 3842 pixels
Sensor width = 0.785 cm

Pixel density = (3842 / 0.785)² / 1000000 = 23.95 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

M1033 sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 10.10

r = 6.16/4.62 = 1.33

X = √	10.10 × 1000000	= 2756
	1.33

Resolution horizontal: X × r = 2756 × 1.33 = 3665
Resolution vertical: X = 2756

Sensor resolution = 3665 x 2756

V1073 sensor resolution

Sensor width = 7.85 mm
Sensor height = 5.89 mm
Effective megapixels = 11.10

r = 7.85/5.89 = 1.33

X = √	11.10 × 1000000	= 2889
	1.33

Resolution horizontal: X × r = 2889 × 1.33 = 3842
Resolution vertical: X = 2889

Sensor resolution = 3842 x 2889

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

M1033 crop factor

Sensor diagonal in mm = 7.70 mm

Crop factor =	43.27	= 5.62
	7.70

V1073 crop factor

Sensor diagonal in mm = 9.81 mm

Crop factor =	43.27	= 4.41
	9.81

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

M1033 equivalent aperture

Crop factor = 5.62
Aperture = f3.1 - f5.7

35-mm equivalent aperture = (f3.1 - f5.7) × 5.62 = f17.4 - f32

V1073 equivalent aperture

Crop factor = 4.41
Aperture = f3.1 - f5.7

35-mm equivalent aperture = (f3.1 - f5.7) × 4.41 = f13.7 - f25.1

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.