Konica-Minolta DiMAGE G530 vs. Fujifilm XF1
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Konica-Minolta DiMAGE G530 | Fujifilm XF1 | ||||
| check price » | check price » | ||||
Megapixels
5.00
12.00
Max. image resolution
2592 x 1944
4000 x 3000
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
2/3" (~ 8.8 x 6.6 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 2.34 |
| (ratio) | ||
| Konica-Minolta DiMAGE G530 | Fujifilm XF1 | |
Surface area:
| 24.84 mm² | vs | 58.08 mm² |
Difference: 33.24 mm² (134%)
XF1 sensor is approx. 2.34x bigger than DiMAGE G530 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 8 years between Konica-Minolta DiMAGE G530 (2004) and Fujifilm XF1 (2012).
Eight years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.13 µm² (3%)
A pixel on Konica-Minolta DiMAGE G530 sensor is approx. 3% bigger than a pixel on Fujifilm XF1.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Konica-Minolta DiMAGE G530
Fujifilm XF1
Total megapixels
Effective megapixels
12.00
Optical zoom
Yes
4x
Digital zoom
Yes
No
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 100 - 3200, (4000, 5000, 6400, 12800 with boost)
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
2 cm
3 cm
Focal length (35mm equiv.)
34 - 102 mm
25 - 100 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f4.9
f1.8 - f4.9
Metering
Centre weighted, Spot
Multi, Average, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
15 sec
30 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical
None
White balance presets
5
7
Screen size
1.5"
3"
Screen resolution
77,000 dots
460,000 dots
Video capture
Max. video resolution
Storage types
Memory Stick, Memory Stick Pro, MultiMedia, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
Lithium-Ion NP-50 rechargeable battery
Weight
145 g
255 g
Dimensions
93.5 x 55.5 x 26 mm
107.9 x 61.5 x 33.0 mm
Year
2004
2012
Choose cameras to compare
Popular comparisons:
- Konica-Minolta DiMAGE G530 vs. Konica-Minolta DiMAGE G600
- Konica-Minolta DiMAGE G530 vs. Minolta DiMAGE G400
- Konica-Minolta DiMAGE G530 vs. Canon Digital IXUS 100 IS
- Konica-Minolta DiMAGE G530 vs. Canon Digital IXUS 90 IS
- Konica-Minolta DiMAGE G530 vs. Minolta DiMAGE A1
- Konica-Minolta DiMAGE G530 vs. Olympus C-7070 Wide Zoom
- Konica-Minolta DiMAGE G530 vs. Nikon D7500
- Konica-Minolta DiMAGE G530 vs. Kodak EasyShare C180
- Konica-Minolta DiMAGE G530 vs. Canon PowerShot G7 X
- Konica-Minolta DiMAGE G530 vs. Fujifilm XF1
- Konica-Minolta DiMAGE G530 vs. Konica-Minolta DiMAGE X50
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Konica-Minolta DiMAGE G530 diagonal
The diagonal of DiMAGE G530 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Fujifilm XF1 diagonal
The diagonal of XF1 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
| Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DiMAGE G530 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
XF1 sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
DiMAGE G530 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.23 µm |
| 2579 |
XF1 pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 3995 pixels
Sensor resolution width = 3995 pixels
| Pixel pitch = | 8.80 | × 1000 | = 2.2 µm |
| 3995 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
DiMAGE G530 pixel area
Pixel pitch = 2.23 µm
Pixel area = 2.23² = 4.97 µm²
Pixel area = 2.23² = 4.97 µm²
XF1 pixel area
Pixel pitch = 2.2 µm
Pixel area = 2.2² = 4.84 µm²
Pixel area = 2.2² = 4.84 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
DiMAGE G530 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
XF1 pixel density
Sensor resolution width = 3995 pixels
Sensor width = 0.88 cm
Pixel density = (3995 / 0.88)² / 1000000 = 20.61 MP/cm²
Sensor width = 0.88 cm
Pixel density = (3995 / 0.88)² / 1000000 = 20.61 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DiMAGE G530 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 4.32 mm
Effective megapixels = 5.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
XF1 sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 12.00
Resolution horizontal: X × r = 3004 × 1.33 = 3995
Resolution vertical: X = 3004
Sensor resolution = 3995 x 3004
Sensor height = 6.60 mm
Effective megapixels = 12.00
| r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 3004
Sensor resolution = 3995 x 3004
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
DiMAGE G530 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
XF1 crop factor
Sensor diagonal in mm = 11.00 mm
| Crop factor = | 43.27 | = 3.93 |
| 11.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DiMAGE G530 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
XF1 equivalent aperture
Crop factor = 3.93
Aperture = f1.8 - f4.9
35-mm equivalent aperture = (f1.8 - f4.9) × 3.93 = f7.1 - f19.3
Aperture = f1.8 - f4.9
35-mm equivalent aperture = (f1.8 - f4.9) × 3.93 = f7.1 - f19.3
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.