Konica-Minolta DiMAGE X60 vs. Konica-Minolta DiMAGE Xg
Comparison
change cameras » | |||||
|
vs |
|
|||
Konica-Minolta DiMAGE X60 | Konica-Minolta DiMAGE Xg | ||||
check price » | check price » |
Megapixels
5.40
3.10
Max. image resolution
2560 x 1920
2048 x 1536
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.7" (~ 5.33 x 4 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.17 | : | 1 |
(ratio) | ||
Konica-Minolta DiMAGE X60 | Konica-Minolta DiMAGE Xg |
Surface area:
24.84 mm² | vs | 21.32 mm² |
Difference: 3.52 mm² (17%)
DiMAGE X60 sensor is approx. 1.17x bigger than DiMAGE Xg sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 2.24 µm² (48%)
A pixel on Konica-Minolta DiMAGE Xg sensor is approx. 48% bigger than a pixel on Konica-Minolta DiMAGE X60.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Konica-Minolta DiMAGE X60
Konica-Minolta DiMAGE Xg
Total megapixels
Effective megapixels
Optical zoom
3x
3.1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400
Auto, 50, 100, 200, 400
RAW
Manual focus
Normal focus range
10 cm
15 cm
Macro focus range
5 cm
15 cm
Focal length (35mm equiv.)
38 - 114 mm
37 - 115 mm
Aperture priority
No
No
Max. aperture
f3.3 - f4
f2.8 - f3.6
Metering
Multi-segment, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
4 sec
4 sec
Max. shutter speed
1/1000 sec
1/1000 sec
Built-in flash
External flash
Viewfinder
None
Optical (tunnel)
White balance presets
5
5
Screen size
2.5"
1.6"
Screen resolution
115,000 dots
85,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
SD/MMC card
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
Lithium-Ion (NP-700)
Lithium-Ion (NP-200)
Weight
115 g
155 g
Dimensions
84 x 56 x 22 mm
86 x 67 x 20 mm
Year
2005
2004
Choose cameras to compare
Popular comparisons:
- Konica-Minolta DiMAGE X60 vs. Konica-Minolta DiMAGE X50
- Konica-Minolta DiMAGE X60 vs. Konica-Minolta DiMAGE X1
- Konica-Minolta DiMAGE X60 vs. Olympus mju 400 Digital Ferrari
- Konica-Minolta DiMAGE X60 vs. Canon IXY DIGITAL 10
- Konica-Minolta DiMAGE X60 vs. Konica-Minolta DiMAGE Xg
- Konica-Minolta DiMAGE X60 vs. Fujifilm FinePix S8000fd
- Konica-Minolta DiMAGE X60 vs. Casio Exilim EX-Z850
- Konica-Minolta DiMAGE X60 vs. Olympus mju mini Digital S
- Konica-Minolta DiMAGE X60 vs. Minolta DiMAGE F100
- Konica-Minolta DiMAGE X60 vs. Konica-Minolta DiMAGE X31
- Konica-Minolta DiMAGE X60 vs. Casio Exilim EX-S880
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Konica-Minolta DiMAGE X60 diagonal
The diagonal of DiMAGE X60 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Konica-Minolta DiMAGE Xg diagonal
The diagonal of DiMAGE Xg sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DiMAGE X60 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
DiMAGE Xg sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
DiMAGE X60 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2680 pixels
Sensor resolution width = 2680 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.15 µm |
2680 |
DiMAGE Xg pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 2031 pixels
Sensor resolution width = 2031 pixels
Pixel pitch = | 5.33 | × 1000 | = 2.62 µm |
2031 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
DiMAGE X60 pixel area
Pixel pitch = 2.15 µm
Pixel area = 2.15² = 4.62 µm²
Pixel area = 2.15² = 4.62 µm²
DiMAGE Xg pixel area
Pixel pitch = 2.62 µm
Pixel area = 2.62² = 6.86 µm²
Pixel area = 2.62² = 6.86 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
DiMAGE X60 pixel density
Sensor resolution width = 2680 pixels
Sensor width = 0.575 cm
Pixel density = (2680 / 0.575)² / 1000000 = 21.72 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2680 / 0.575)² / 1000000 = 21.72 MP/cm²
DiMAGE Xg pixel density
Sensor resolution width = 2031 pixels
Sensor width = 0.533 cm
Pixel density = (2031 / 0.533)² / 1000000 = 14.52 MP/cm²
Sensor width = 0.533 cm
Pixel density = (2031 / 0.533)² / 1000000 = 14.52 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DiMAGE X60 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.40
Resolution horizontal: X × r = 2015 × 1.33 = 2680
Resolution vertical: X = 2015
Sensor resolution = 2680 x 2015
Sensor height = 4.32 mm
Effective megapixels = 5.40
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2015
Sensor resolution = 2680 x 2015
DiMAGE Xg sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 3.10
Resolution horizontal: X × r = 1527 × 1.33 = 2031
Resolution vertical: X = 1527
Sensor resolution = 2031 x 1527
Sensor height = 4.00 mm
Effective megapixels = 3.10
r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 1527
Sensor resolution = 2031 x 1527
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
DiMAGE X60 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
DiMAGE Xg crop factor
Sensor diagonal in mm = 6.66 mm
Crop factor = | 43.27 | = 6.5 |
6.66 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DiMAGE X60 equivalent aperture
Crop factor = 6.02
Aperture = f3.3 - f4
35-mm equivalent aperture = (f3.3 - f4) × 6.02 = f19.9 - f24.1
Aperture = f3.3 - f4
35-mm equivalent aperture = (f3.3 - f4) × 6.02 = f19.9 - f24.1
DiMAGE Xg equivalent aperture
Crop factor = 6.5
Aperture = f2.8 - f3.6
35-mm equivalent aperture = (f2.8 - f3.6) × 6.5 = f18.2 - f23.4
Aperture = f2.8 - f3.6
35-mm equivalent aperture = (f2.8 - f3.6) × 6.5 = f18.2 - f23.4
More comparisons of Konica-Minolta DiMAGE X60:
- Konica-Minolta DiMAGE X60 vs. Canon PowerShot SX70 HS
- Konica-Minolta DiMAGE X60 vs. Minolta DiMAGE Xt
- Konica-Minolta DiMAGE X60 vs. Olympus Stylus 300
- Konica-Minolta DiMAGE X60 vs. Pentax Optio S40
- Konica-Minolta DiMAGE X60 vs. Olympus Mju 1060
- Konica-Minolta DiMAGE X60 vs. Olympus mju mini Digital
- Konica-Minolta DiMAGE X60 vs. Olympus Stylus 830
- Konica-Minolta DiMAGE X60 vs. Pentax Optio S6
- Konica-Minolta DiMAGE X60 vs. Casio Exilim EX-ZR800
- Konica-Minolta DiMAGE X60 vs. Fujifilm XF10
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.