Konica-Minolta DiMAGE Z2 vs. Fujifilm FinePix A600 Zoom
Comparison
change cameras » | |||||
|
vs |
|
|||
Konica-Minolta DiMAGE Z2 | Fujifilm FinePix A600 Zoom | ||||
check price » | check price » |
Megapixels
3.90
6.10
Max. image resolution
2272 x 1704
2848 x 2136
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/1.7" (~ 7.53 x 5.64 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.71 |
(ratio) | ||
Konica-Minolta DiMAGE Z2 | Fujifilm FinePix A600 Zoom |
Surface area:
24.84 mm² | vs | 42.47 mm² |
Difference: 17.63 mm² (71%)
A600 Zoom sensor is approx. 1.71x bigger than DiMAGE Z2 sensor.
Note: You are comparing cameras of different generations.
There is a 2 year gap between Konica-Minolta DiMAGE Z2 (2004) and Fujifilm A600 Zoom (2006).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.52 µm² (8%)
A pixel on Fujifilm A600 Zoom sensor is approx. 8% bigger than a pixel on Konica-Minolta DiMAGE Z2.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Konica-Minolta DiMAGE Z2
Fujifilm A600 Zoom
Total megapixels
6.30
Effective megapixels
6.10
Optical zoom
10x
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 100, 200, 400
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
10 cm
10 cm
Focal length (35mm equiv.)
38 - 380 mm
36 - 108 mm
Aperture priority
Yes
No
Max. aperture
f2.8 - f3.5
f2.8 - f5.2
Metering
Multi, Average, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
15 sec
2 sec
Max. shutter speed
1/1000 sec
1/1600 sec
Built-in flash
External flash
Viewfinder
Electronic
None
White balance presets
5
5
Screen size
1.5"
2.4"
Screen resolution
113,000 dots
112,000 dots
Video capture
Max. video resolution
Storage types
SD/MMC card
xD Picture Card, Internal
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
AA (2) batteries (NiMH recommended)
Weight
410 g
195 g
Dimensions
110 x 78 x 80 mm
93 x 60 x 30 mm
Year
2004
2006
Choose cameras to compare
Popular comparisons:
- Konica-Minolta DiMAGE Z2 vs. Nokia Lumia 1020
- Konica-Minolta DiMAGE Z2 vs. Konica-Minolta DiMAGE A2
- Konica-Minolta DiMAGE Z2 vs. Canon Digital IXUS 60
- Konica-Minolta DiMAGE Z2 vs. Canon PowerShot SX10 IS
- Konica-Minolta DiMAGE Z2 vs. Nikon Coolpix P7100
- Konica-Minolta DiMAGE Z2 vs. Nikon D5100
- Konica-Minolta DiMAGE Z2 vs. Fujifilm FinePix S602 Zoom
- Konica-Minolta DiMAGE Z2 vs. Panasonic Lumix DMC-FZ200
- Konica-Minolta DiMAGE Z2 vs. Sony Cyber-shot DSC-W270
- Konica-Minolta DiMAGE Z2 vs. Panasonic Lumix DMC-FZ28
- Konica-Minolta DiMAGE Z2 vs. Canon PowerShot G2
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Konica-Minolta DiMAGE Z2 diagonal
The diagonal of DiMAGE Z2 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Fujifilm A600 Zoom diagonal
The diagonal of A600 Zoom sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of
that value - 9.41 mm. If you want to know why, see
sensor sizes.
w = 7.53 mm
h = 5.64 mm
w = 7.53 mm
h = 5.64 mm
Diagonal = √ | 7.53² + 5.64² | = 9.41 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DiMAGE Z2 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
A600 Zoom sensor area
Width = 7.53 mm
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
DiMAGE Z2 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2277 pixels
Sensor resolution width = 2277 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.53 µm |
2277 |
A600 Zoom pixel pitch
Sensor width = 7.53 mm
Sensor resolution width = 2860 pixels
Sensor resolution width = 2860 pixels
Pixel pitch = | 7.53 | × 1000 | = 2.63 µm |
2860 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
DiMAGE Z2 pixel area
Pixel pitch = 2.53 µm
Pixel area = 2.53² = 6.4 µm²
Pixel area = 2.53² = 6.4 µm²
A600 Zoom pixel area
Pixel pitch = 2.63 µm
Pixel area = 2.63² = 6.92 µm²
Pixel area = 2.63² = 6.92 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
DiMAGE Z2 pixel density
Sensor resolution width = 2277 pixels
Sensor width = 0.575 cm
Pixel density = (2277 / 0.575)² / 1000000 = 15.68 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2277 / 0.575)² / 1000000 = 15.68 MP/cm²
A600 Zoom pixel density
Sensor resolution width = 2860 pixels
Sensor width = 0.753 cm
Pixel density = (2860 / 0.753)² / 1000000 = 14.43 MP/cm²
Sensor width = 0.753 cm
Pixel density = (2860 / 0.753)² / 1000000 = 14.43 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DiMAGE Z2 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 3.90
Resolution horizontal: X × r = 1712 × 1.33 = 2277
Resolution vertical: X = 1712
Sensor resolution = 2277 x 1712
Sensor height = 4.32 mm
Effective megapixels = 3.90
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1712
Sensor resolution = 2277 x 1712
A600 Zoom sensor resolution
Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 6.10
Resolution horizontal: X × r = 2134 × 1.34 = 2860
Resolution vertical: X = 2134
Sensor resolution = 2860 x 2134
Sensor height = 5.64 mm
Effective megapixels = 6.10
r = 7.53/5.64 = 1.34 |
|
Resolution vertical: X = 2134
Sensor resolution = 2860 x 2134
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
DiMAGE Z2 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
A600 Zoom crop factor
Sensor diagonal in mm = 9.41 mm
Crop factor = | 43.27 | = 4.6 |
9.41 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DiMAGE Z2 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f3.5
35-mm equivalent aperture = (f2.8 - f3.5) × 6.02 = f16.9 - f21.1
Aperture = f2.8 - f3.5
35-mm equivalent aperture = (f2.8 - f3.5) × 6.02 = f16.9 - f21.1
A600 Zoom equivalent aperture
Crop factor = 4.6
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 4.6 = f12.9 - f23.9
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 4.6 = f12.9 - f23.9
More comparisons of Konica-Minolta DiMAGE Z2:
- Konica-Minolta DiMAGE Z2 vs. Sony Cyber-shot DSC-HX50
- Konica-Minolta DiMAGE Z2 vs. Nikon Coolpix S9500
- Konica-Minolta DiMAGE Z2 vs. Panasonic Lumix DMC-LF1
- Konica-Minolta DiMAGE Z2 vs. Olympus Stylus XZ-10
- Konica-Minolta DiMAGE Z2 vs. Fujifilm FinePix HS20 EXR
- Konica-Minolta DiMAGE Z2 vs. Ricoh GXR A12 50mm F2.5 Macro
- Konica-Minolta DiMAGE Z2 vs. Fujifilm FinePix A800
- Konica-Minolta DiMAGE Z2 vs. Sony Alpha NEX-3N
- Konica-Minolta DiMAGE Z2 vs. Canon PowerShot G15
- Konica-Minolta DiMAGE Z2 vs. Fujifilm FinePix A600 Zoom
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.