Konica-Minolta DiMAGE Z20 vs. Panasonic Lumix DMC-FZ200
Comparison
change cameras » | |||||
|
vs |
|
|||
Konica-Minolta DiMAGE Z20 | Panasonic Lumix DMC-FZ200 | ||||
check price » | check price » |
Megapixels
5.00
12.10
Max. image resolution
2560 x 1920
4000 x 3000
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.15 |
(ratio) | ||
Konica-Minolta DiMAGE Z20 | Panasonic Lumix DMC-FZ200 |
Surface area:
24.84 mm² | vs | 28.46 mm² |
Difference: 3.62 mm² (15%)
FZ200 sensor is approx. 1.15x bigger than DiMAGE Z20 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 7 years between Konica-Minolta DiMAGE Z20 (2005) and Panasonic FZ200 (2012).
Seven years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 2.6 µm² (110%)
A pixel on Konica-Minolta DiMAGE Z20 sensor is approx. 110% bigger than a pixel on Panasonic FZ200.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Konica-Minolta DiMAGE Z20
Panasonic FZ200
Total megapixels
12.80
Effective megapixels
12.10
Optical zoom
8.1x
24x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 320
Auto, 100, 200, 400, 800, 1600, 3200, (6400 with boost)
RAW
Manual focus
Normal focus range
50 cm
30 cm
Macro focus range
1 cm
1 cm
Focal length (35mm equiv.)
36 - 290 mm
25 - 600 mm
Aperture priority
Yes
Yes
Max. aperture
f3.2 - f3.4
f2.8
Metering
Centre weighted, Multi-segment, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
4 sec
60 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Electronic
Electronic
White balance presets
6
5
Screen size
1.5"
3"
Screen resolution
113,000 dots
460,000 dots
Video capture
Max. video resolution
1920x1080 (60p/60i/30p)
Storage types
MultiMedia, Secure Digital
SD/SDHC/SDXC, Internal
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
Lithium-Ion rechargeable battery
Weight
300 g
588 g
Dimensions
109 x 82 x 94 mm
125 x 87 x 110 mm
Year
2005
2012
Choose cameras to compare
Popular comparisons:
- Konica-Minolta DiMAGE Z20 vs. Konica-Minolta DiMAGE Z6
- Konica-Minolta DiMAGE Z20 vs. Konica-Minolta DiMAGE Z10
- Konica-Minolta DiMAGE Z20 vs. BenQ DC C1480
- Konica-Minolta DiMAGE Z20 vs. Konica-Minolta DiMAGE Z2
- Konica-Minolta DiMAGE Z20 vs. Konica-Minolta DiMAGE Z3
- Konica-Minolta DiMAGE Z20 vs. Konica-Minolta DiMAGE A2
- Konica-Minolta DiMAGE Z20 vs. Olympus C-60 Zoom
- Konica-Minolta DiMAGE Z20 vs. Konica-Minolta DiMAGE Z5
- Konica-Minolta DiMAGE Z20 vs. Panasonic Lumix DMC-FZ200
- Konica-Minolta DiMAGE Z20 vs. Panasonic Lumix DMC-FS10
- Konica-Minolta DiMAGE Z20 vs. Panasonic Lumix DMC-ZS5
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Konica-Minolta DiMAGE Z20 diagonal
The diagonal of DiMAGE Z20 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Panasonic FZ200 diagonal
The diagonal of FZ200 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DiMAGE Z20 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
FZ200 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
DiMAGE Z20 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.23 µm |
2579 |
FZ200 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4011 pixels
Sensor resolution width = 4011 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.54 µm |
4011 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
DiMAGE Z20 pixel area
Pixel pitch = 2.23 µm
Pixel area = 2.23² = 4.97 µm²
Pixel area = 2.23² = 4.97 µm²
FZ200 pixel area
Pixel pitch = 1.54 µm
Pixel area = 1.54² = 2.37 µm²
Pixel area = 1.54² = 2.37 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
DiMAGE Z20 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
FZ200 pixel density
Sensor resolution width = 4011 pixels
Sensor width = 0.616 cm
Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DiMAGE Z20 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 4.32 mm
Effective megapixels = 5.00
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
FZ200 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.10
Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Sensor height = 4.62 mm
Effective megapixels = 12.10
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
DiMAGE Z20 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
FZ200 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DiMAGE Z20 equivalent aperture
Crop factor = 6.02
Aperture = f3.2 - f3.4
35-mm equivalent aperture = (f3.2 - f3.4) × 6.02 = f19.3 - f20.5
Aperture = f3.2 - f3.4
35-mm equivalent aperture = (f3.2 - f3.4) × 6.02 = f19.3 - f20.5
FZ200 equivalent aperture
Crop factor = 5.62
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 5.62 = f15.7
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 5.62 = f15.7
More comparisons of Konica-Minolta DiMAGE Z20:
- Konica-Minolta DiMAGE Z20 vs. Olympus C-5060 Wide Zoom
- Konica-Minolta DiMAGE Z20 vs. Sony Cyber-shot DSC-TX1
- Konica-Minolta DiMAGE Z20 vs. Olympus C-2100 UZ
- Konica-Minolta DiMAGE Z20 vs. Canon PowerShot A80
- Konica-Minolta DiMAGE Z20 vs. Canon PowerShot G9 X Mark II
- Konica-Minolta DiMAGE Z20 vs. Nikon D70s
- Konica-Minolta DiMAGE Z20 vs. Panasonic Lumix DMC-TZ40
- Konica-Minolta DiMAGE Z20 vs. Panasonic Lumix DMC-F7
- Konica-Minolta DiMAGE Z20 vs. Nikon Coolpix P330
- Konica-Minolta DiMAGE Z20 vs. Canon PowerShot G11
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.