Konica-Minolta e-mini D vs. Konica-Minolta DiMAGE X50
Comparison
change cameras » | |||||
|
vs |
|
|||
Konica-Minolta e-mini D | Konica-Minolta DiMAGE X50 | ||||
check price » | check price » |
Megapixels
0.30
5.00
Max. image resolution
640 x 480
2560 x 1920
Sensor
Sensor type
CMOS
CCD
Sensor size
2/3" (~ 8.8 x 6.6 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
2.34 | : | 1 |
(ratio) | ||
Konica-Minolta e-mini D | Konica-Minolta DiMAGE X50 |
Surface area:
58.08 mm² | vs | 24.84 mm² |
Difference: 33.24 mm² (134%)
e-mini D sensor is approx. 2.34x bigger than DiMAGE X50 sensor.
Note: You are comparing cameras of different generations.
There is a 3 year gap between Konica-Minolta e-mini D (2001) and Konica-Minolta DiMAGE X50 (2004).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 188.8 µm² (3799%)
A pixel on Konica-Minolta e-mini D sensor is approx. 3799% bigger than a pixel on Konica-Minolta DiMAGE X50.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Konica-Minolta e-mini D
Konica-Minolta DiMAGE X50
Total megapixels
Effective megapixels
Optical zoom
1x
2.8x
Digital zoom
No
Yes
ISO sensitivity
100
Auto, 50, 100, 200, 400
RAW
Manual focus
Normal focus range
40 cm
10 cm
Macro focus range
13 cm
6 cm
Focal length (35mm equiv.)
38 mm
37 - 105 mm
Aperture priority
No
No
Max. aperture
f2.8 - f3.5
f2.8 - f5
Metering
256-segment Matrix
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
4 sec
4 sec
Max. shutter speed
1/2000 sec
1/1000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
5
5
Screen size
1.8"
2"
Screen resolution
112,000 dots
115,000 dots
Video capture
Max. video resolution
Storage types
Internal
MultiMedia, Secure Digital
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
AA (2) batteries (NiMH recommended)
Lithium-Ion (NP-700)
Weight
118 g
125 g
Dimensions
70 x 103 x 30 mm
83.5 x 62 x 23.5 mm
Year
2001
2004
Choose cameras to compare
Popular comparisons:
- Konica-Minolta e-mini D vs. Konica-Minolta DiMAGE X50
- Konica-Minolta e-mini D vs. Konica-Minolta e-mini
- Konica-Minolta e-mini D vs. Canon EOS Rebel T3i
- Konica-Minolta e-mini D vs. Konica-Minolta e-mini M
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 1200D
- Canon EOS 200D vs. Canon EOS 700D
- Canon EOS 1300D vs. Canon EOS 750D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Konica-Minolta e-mini D diagonal
The diagonal of e-mini D sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Konica-Minolta DiMAGE X50 diagonal
The diagonal of DiMAGE X50 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
e-mini D sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
DiMAGE X50 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
e-mini D pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 632 pixels
Sensor resolution width = 632 pixels
Pixel pitch = | 8.80 | × 1000 | = 13.92 µm |
632 |
DiMAGE X50 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
Pixel pitch = | 5.75 | × 1000 | = 2.23 µm |
2579 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
e-mini D pixel area
Pixel pitch = 13.92 µm
Pixel area = 13.92² = 193.77 µm²
Pixel area = 13.92² = 193.77 µm²
DiMAGE X50 pixel area
Pixel pitch = 2.23 µm
Pixel area = 2.23² = 4.97 µm²
Pixel area = 2.23² = 4.97 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
e-mini D pixel density
Sensor resolution width = 632 pixels
Sensor width = 0.88 cm
Pixel density = (632 / 0.88)² / 1000000 = 0.52 MP/cm²
Sensor width = 0.88 cm
Pixel density = (632 / 0.88)² / 1000000 = 0.52 MP/cm²
DiMAGE X50 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
e-mini D sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 0.30
Resolution horizontal: X × r = 475 × 1.33 = 632
Resolution vertical: X = 475
Sensor resolution = 632 x 475
Sensor height = 6.60 mm
Effective megapixels = 0.30
r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 475
Sensor resolution = 632 x 475
DiMAGE X50 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 4.32 mm
Effective megapixels = 5.00
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
e-mini D crop factor
Sensor diagonal in mm = 11.00 mm
Crop factor = | 43.27 | = 3.93 |
11.00 |
DiMAGE X50 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
e-mini D equivalent aperture
Crop factor = 3.93
Aperture = f2.8 - f3.5
35-mm equivalent aperture = (f2.8 - f3.5) × 3.93 = f11 - f13.8
Aperture = f2.8 - f3.5
35-mm equivalent aperture = (f2.8 - f3.5) × 3.93 = f11 - f13.8
DiMAGE X50 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f5
35-mm equivalent aperture = (f2.8 - f5) × 6.02 = f16.9 - f30.1
Aperture = f2.8 - f5
35-mm equivalent aperture = (f2.8 - f5) × 6.02 = f16.9 - f30.1
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.